DD-WRT :: View topic - New Build - 01/03/2025

New Build - 01/03/2025 - r58976

DD-WRT Forum Index -> Qualcomm Atheros based Hardware

Goto page 1, 2 Next

View previous topic :: View next topic

Author

Message

blkt
DD-WRT Guru

Joined: 20 Jan 2019
Posts: 6185

Posted: Fri Jan 03, 2025 12:51 Post subject: New Build - 01/03/2025 - r58976

Welcome to Atheros r58976 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r58950 (mirror)

• OpenVPN 2.6.12: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r58892 r58950 r58976

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

Code:

[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

Sponsor

lexridge
DD-WRT Guru

Joined: 07 Jun 2006
Posts: 2096
Location: WV, USA

Posted: Fri Jan 03, 2025 20:01 Post subject:

Router/Version: Linksy MX4300
File/Kernel: dd-wrt-webupgrade-mx4300-r58950.bin
Previous/Reset: dd-wrt-webupgrade-mx4300_r58976.bin / No reset
Mode/Status: WAP/VAP on 2.4 & 5ghz, multiple VLANs over trunk port, Entware
Issues/Errors: No issues so far

Router/Version: Linksys MX4300
File/Kernel: dd-wrt-webflash-mx4300-r58976.bin
Previous/Reset: dd-wrt-webflash-mx4300-r58950.bin / No reset
Mode/Status: 802.11s Primary Node over 5ghz w/VLAN trunk, Entware, 2.4ghz VAPs
Issues/Errors: Working well

Router/Version: Linksys EA8500
File/Kernel: dd-wrt-webupgrade-ea8500-r58976.bin
Previous/Reset: dd-wrt-webupgrade-ea8500-r58950.bin / No reset
Mode/Status: 802.11s Secondary Node on 5ghz to extend vlan trunk/Ethernet
Issues/Errors: Working Well

Router/Version: Linksys MR7350
File/Kernel: dd-wrt-webflash-mr7350-r58976.bin
Previous/Reset: dd-wrt-webflash-mx4300-r58950.bin / No reset
Mode/Status: WDS Station to extend Ethernet
Issues/Errors: Working well

I noticed we now have the ability on both MX4300 and MR7350 to completely turn off QCA NSS Subsystem. Note this option does not show up on the EA8500 so I assume this would be on AX routers only. I have not had time to mess around with it yet but wondering if this completely prevents the nss kernel modules from loading, therefore not using nearly as much RAM?
_________________
- Linksys EA8500: I-Gateway, WAP/VAP 5ghz only. Features: VLANs, Samba, WG, Entware - r60xxx
- Linksys EA8500: 802.11s Secondary w/VLAN Trunk over 5ghz - r60xxx
- Linksys MX4300: 802.11s Primary w/VLAN Trunk over 5ghz. 2.4ghz WAP/VAP only - r60xxx
- Linksys MX4300: (WAP/VAP (7)) Multiple VLANs over single trunk port. Entware/Samba r60xxx
- Linksys MR7350: WDS Station for extended Ethernet r60xxx
- Linksys MR7500, MX8500: None in production. Just testing. r60xxx
- OSes: Fedora 40, 10 RPis (2,3,4,5), 23 ESP8266s: Straight from Amiga to Linux in '95, never having owned a Windows PC.
- Forum member #248

Frakko
DD-WRT User

Joined: 06 May 2016
Posts: 328

Posted: Sat Jan 04, 2025 5:59 Post subject: Re: New Build - 01/03/2025 - r58976
Router/Version: Netgear R7800 File/Kernel: DD-WRT v3.0-r58976 std (01/03/25) Previous/Reset: 12-30-2024-r58950 / No Mode/Status: Normal Issues/Errors: None so far (apart from the usual known errors, slowness, no samba etc.) Thank you BS

Alozaros
DD-WRT Guru

Joined: 16 Nov 2015
Posts: 6832
Location: UK, London, just across the river..

Posted: Sat Jan 04, 2025 12:20 Post subject:

Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r58976 std (01/03/25)
Kernel Version Linux 6.1.123-rt28 #519 SMP PREEMPT Fri Jan 3 07:42:33 +07 2025 armv7l

update: CLI r58950> r58976
reset: NO
mode: Gateway/DoT via Entware, AD-Block (via script),IPset Firewall,Forced DNS,AP&Net Isolation,x3VLAN,VPN client(PBR),40 HT 2.4Ghz only(Vanilla), Disable 121
status: Operational 8h+
errors: still not able to CLI reboot after cli flash...

dmesg:

[187632.674533] EXT4-fs (sda1): unmounting filesystem.
[187780.908495] SQUASHFS error: Failed to read block 0x18cff5e: -5
[187780.908506] SQUASHFS error: Unable to read metadata cache entry [18cff5c]
[187780.908511] SQUASHFS error: Unable to read inode 0x4606112d

root@R7800:/tmp# reboot
-sh: /sbin/reboot: I/O error

waited 5 min, that rebooted via

echo b > /proc/sysrq-trigger
_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 58184 WAP
TP-Link WR1043NDv2 -DD-WRT 61264 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 61264 Gateway/DoT,Forced DNS,AP Isolation,2VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 61264 Gateway/DNSCryptv2,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 60791 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Dynalink DL-WRX36-DDWRT 60791
Broadcom
Netgear R7000 --DD-WRT 61337 Gateway/DNScrypt-proxy2/AD-Block,IPset Firewall,Forced DNS,x4VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913

Wheels99
DD-WRT Novice

Joined: 30 May 2023
Posts: 1

Posted: Sat Jan 04, 2025 14:11 Post subject:

Router Model: Dynalink DL-WRX36
Firmware: DD-WRT v3.0-r58976 std (01/03/25)
Kernel Version: Linux 6.6.69-rt29 #1989 SMP PREEMPT Thu Jan 2 23:49:52 +07 2025 aarch64

Update: First Flash
Reset: YES
Mode: Gateway
Status: Operational 1 Hour
WAN Connection Type: Static
Services Used: Just SmartDNS, NSS-ECM
Errors: USB mounts jffs,opt & swap, Configured NAS, but Windows 11 will not allow connection, says permission error? Configured the same as a working R7800 Router on last 4.9 Kernal build?

habeIchVergessen
DD-WRT User

Joined: 04 May 2010
Posts: 447

Posted: Sat Jan 04, 2025 23:25 Post subject:

hardware: ea8500

issues:

Code:

root@router:~# dmesg | grep -E "(ubi)"
[ 11.081522] ubi0: attaching mtd18
[ 11.332271] ubi0: scanning is finished
[ 11.342044] ubi0: attached mtd18 (name "ddwrt", size 32 MiB)
[ 11.342054] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 11.342060] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 11.342066] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 11.342072] ubi0: good PEBs: 255, bad PEBs: 5, corrupted PEBs: 0
[ 11.342078] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 11.342085] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 708182959
[ 11.342092] ubi0: available PEBs: 0, total reserved PEBs: 255, PEBs reserved for bad PEB handling: 15
[ 11.354429] ubi0: background thread "ubi_bgt0d" started, PID 1336
[ 11.362359] UBIFS (ubi0:0): Mounting in unauthenticated mode
[ 11.362370] UBIFS error (ubi0:0 pid 1319): 0xc04120f8: 'compressor "zstd" is not compiled in
[ 11.632774] ubi0: detaching mtd18
[ 11.633662] ubi0: mtd18 is detached

lexridge
DD-WRT Guru

Joined: 07 Jun 2006
Posts: 2096
Location: WV, USA

Posted: Sat Jan 04, 2025 23:49 Post subject:

habeIchVergessen wrote:

hardware: ea8500

issues:

Code:

That looks like the flash chip may be going bad. Did you try to reflash. mtd18 on this router is the dd-wrt partition. Is it booting? I am not seeing this on my EA8500 running this release.
_________________
- Linksys EA8500: I-Gateway, WAP/VAP 5ghz only. Features: VLANs, Samba, WG, Entware - r60xxx
- Linksys EA8500: 802.11s Secondary w/VLAN Trunk over 5ghz - r60xxx
- Linksys MX4300: 802.11s Primary w/VLAN Trunk over 5ghz. 2.4ghz WAP/VAP only - r60xxx
- Linksys MX4300: (WAP/VAP (7)) Multiple VLANs over single trunk port. Entware/Samba r60xxx
- Linksys MR7350: WDS Station for extended Ethernet r60xxx
- Linksys MR7500, MX8500: None in production. Just testing. r60xxx
- OSes: Fedora 40, 10 RPis (2,3,4,5), 23 ESP8266s: Straight from Amiga to Linux in '95, never having owned a Windows PC.
- Forum member #248

ajd678
DD-WRT Novice

Joined: 01 Jul 2024
Posts: 13

Posted: Sun Jan 05, 2025 2:30 Post subject: MR7350
Router/Version: Linksys MR7350 File/Kernel: Linux 6.6.69-rt29 #1989 SMP PREEMPT Thu Jan 2 23:49:52 +07 2025 aarch64 Previous/Reset: previous build/no Mode/Status: AP 2.4ghz ng mixed 20mhz 1 Lan SFE disabled Issues/Errors: working fine Thanks!

MLandi
DD-WRT Guru

Joined: 04 Dec 2007
Posts: 1161
Location: Murrysville, PA

Posted: Sun Jan 05, 2025 16:36 Post subject:

Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000
File/Kernel: DD-WRT v3.0-r58976 std (01/03/25) / Linux 4.9.337 #749 SMP Sat Nov 30 18:13:03 +07 2024 armv7l
Previous/Reset: DD-WRT v3.0-r58950 std (12/30/24) / Linux 4.9.337 #749 SMP Sat Nov 30 18:13:03 +07 2024 armv7l
Mode/Status: Gateway / Working Normally
Issues/Errors: None
_________________
Netgear R9000
DD-WRT v3.0-r61337 std (05/17/25)
Linux 4.9.337 #770 SMP Thu Apr 24 00:05:49 +07 2025 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
SmartDNS (using Cloudflare, Quad9 and Google), no QoS, no SFE
2.4GHz: AP, DD-WRT, N Only, ACK Timing 500, WPA2 w/AES
5GHz: AP, DD-WRT, AC Only, ACK Timing 500, WPA2 w/AES
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/40Mbps

KACTET
DD-WRT Guru

Joined: 01 May 2022
Posts: 535

Posted: Sun Jan 05, 2025 17:35 Post subject: WR841ND

Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin_r58976 / Linux 3.18.140-d6 #226256 Fri Jan 3 12:18:14 +07 2025 mips
Previous/Reset: r58950 / no
Mode/Status: AP wired and wireless / Up and running for 9:39 hours
Issues/Errors: Nothing significant

If your router's light turns red, don't worry. Internet connection is ok.

Thank you BS and gurus!
_________________
Atheros
Netgear XR500 Nighthawk - DD-WRT 59468
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 60586
Broadcom
Asus RT-AC88U - DD-WRT 60586
Asus RT-AC87U R - DD-WRT 60586
Asus RT-N66U - DD-WRT 60511
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2

habeIchVergessen
DD-WRT User

Joined: 04 May 2010
Posts: 447

Posted: Sun Jan 05, 2025 21:31 Post subject:

lexridge wrote:

That looks like the flash chip may be going bad. Did you try to reflash. mtd18 on this router is the dd-wrt partition. Is it booting? I am not seeing this on my EA8500 running this release.

it's mtd18 as in 58389. booting was ok

Code:

root@router:~# cat /tmp/loginprompt
DD-WRT v3.0-r58389 std (c) 2024 NewMedia-NET GmbH
Release: 09/20/24
Board: Linksys EA8500
root@router:~# dmesg | grep -E "(ubi|jffs)"
[ 9.036989] jffs2: version 2.2 (NAND) (LZMA) (CMODE_SIZE) (c) 2001-2006 Red Hat, Inc.
[ 9.082355] ubi0: attaching mtd18
[ 9.313358] ubi0: scanning is finished
[ 9.322628] ubi0: attached mtd18 (name "ddwrt", size 32 MiB)
[ 9.322638] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 9.322645] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 9.322650] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 9.322655] ubi0: good PEBs: 255, bad PEBs: 5, corrupted PEBs: 0
[ 9.322660] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 9.322665] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 312711032
[ 9.322672] ubi0: available PEBs: 0, total reserved PEBs: 255, PEBs reserved for bad PEB handling: 15
[ 9.322690] ubi0: background thread "ubi_bgt0d" started, PID 1334
[ 9.328076] UBIFS (ubi0:0): Mounting in unauthenticated mode
[ 9.328231] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1335
[ 9.431650] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "ddwrt"
[ 9.431662] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 9.431671] UBIFS (ubi0:0): FS size: 28696576 bytes (27 MiB, 226 LEBs), max 236 LEBs, journal size 1396736 bytes (1 MiB, 11 LEBs)
[ 9.431681] UBIFS (ubi0:0): reserved for root: 1355409 bytes (1323 KiB)
[ 9.431686] UBIFS (ubi0:0): media format: w5/r0 (latest is w5/r0), UUID 72BD7DEE-4697-4BA9-8A2E-8B04C15D7F9D, small LPT model
[ 9.432860] UBIFS (ubi0:0): full atime support is enabled.
root@router:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00040000 00020000 "SBL1"
mtd1: 00140000 00020000 "MIBIB"
mtd2: 00140000 00020000 "SBL2"
mtd3: 00280000 00020000 "SBL3"
mtd4: 00120000 00020000 "DDRCONFIG"
mtd5: 00120000 00020000 "SSD"
mtd6: 00280000 00020000 "TZ"
mtd7: 00280000 00020000 "RPM"
mtd8: 00140000 00020000 "art"
mtd9: 00100000 00020000 "APPSBL"
mtd10: 00040000 00020000 "u_env"
mtd11: 00040000 00020000 "s_env"
mtd12: 00040000 00020000 "devinfo"
mtd13: 02800000 00020000 "linux"
mtd14: 014c0000 00020000 "rootfs"
mtd15: 027c0000 00020000 "linux2"
mtd16: 01620000 00020000 "rootfs2"
mtd17: 00040000 00020000 "nvram"
mtd18: 02080000 00020000 "ddwrt"
root@router:~#

baboeska
DD-WRT User

Joined: 22 Jun 2011
Posts: 74

Posted: Mon Jan 06, 2025 9:58 Post subject:
Code: Router/Version: TP Link w841 ndv11 File/Kernel: Previous/Reset: reset and not reset Mode/Status: gateway, ap Issues/Errors: resets badly when fixed IP assignments are made UI stops working after static IPs assigned. Nvram related issue?

kernel-panic69
DD-WRT Guru

Joined: 08 May 2018
Posts: 16037
Location: Texas, USA

Posted: Mon Jan 06, 2025 19:16 Post subject:

@baboseka: Static IPs or Static Leases? Are the wireless clients using MAC randomization? How many times do we have to ask?
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
RSS feed for DD-WRT releases (2025)
RSS feed for DD-WRT releases (2024)
RSS feed for DD-WRT releases (2023)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net

baboeska
DD-WRT User

Joined: 22 Jun 2011
Posts: 74

Posted: Tue Jan 07, 2025 1:10 Post subject:

kernel-panic69 wrote:

@baboseka: Static IPs or Static Leases? Are the wireless clients using MAC randomization? How many times do we have to ask?

Fixed MAC addresses.
Well, static leases assigned via initially status - lan, then services page to fine tune assignment.

Wifi appears to stay active, internet dies, router resetting doesn't fix issue, replicated twice.

As a side note, physical cable used for connection, static IP not assigned to device doing gui stuff.

Zyxx
DD-WRT Guru

Joined: 28 Dec 2018
Posts: 852

Posted: Tue Jan 07, 2025 18:17 Post subject:

Im currently in the process of scraping my old Netgear 7800 in favour for a new Linksys MR7350.
Everything in this Build is working fine so far.

But when I try to run a speedtest via 2.4GHz (connected to a mobile phone of mine) using nperf.com . The 2.4GHz WiFi and 5GHz Wifi become unresponsive and the Syslog is filled with this:

Code:

Jan 7 19:07:37.353 MR7350 kern.info kernel: [ 832.104392] ath11k c000000.wifi: num_max_allowed overflow 8193

For now I will not commence Speedtesting on 2.4GHz, but is this known behaviour?

Goto page 1, 2 Next

Display posts from previous:

Page 1 of 2

DD-WRT Forum Index -> Qualcomm Atheros based Hardware

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Log in

New Build - 01/03/2025 - r58976

Quick Links

Log in