[blkt]

Welcome to Marvell r58892 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r58881 (mirror)

• OpenVPN 2.6.12: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r58892

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[ewo32]

Router: Linksys WRT32X
Firmware: DD-WRT v3.0-r58892 std (12/25/24)
File: ddwrt-linksys-wrt32x-webflash.bin
Kernel: Linux 6.1.121-rt28 #823 SMP Wed Dec 25 02:55:27 +07 2024 armv7l
Previous/Reset: DD-WRT v3.0-r58881 std (12/24/24) / No
Mode/Status: Gateway (PPPOE, ignore WAN DNS, non-default router IP, SFE disabled), WAN to ONT, AP, wlan0 5GHz AC-only VHT80 WPA2-Personal-CCMP, wlan1 2.4GHz N-only HT40 WPA2-Personal-CCMP, DDNS (SSL/TLS), encrypt DNS (DNSSEC, check unsigned DNS replies), virtual interface wlan1.1 (2.4GHz, unbridged, AP isolation, net isolation, DHCPD, web UI disabled), wlan2 disabled, SSH (non-default port, public key, password login disabled), telnet disabled, wireguard server (non-default port, preshared key) / Stable.
Issues/Errors: None.

CLI / SSH upgrade from konsole over wireless.

Update:

No issues, up five days. About to upgrade to 58950.

[greenphantom61]

Router/Version: Linksys WRT3200ACM
Firmware: DD-WRT v3.0-r58892 std (12/25/24)
File/Kernel: Linux 6.1.121-rt28 #823 SMP Wed Dec 25 02:55:27 +07 2024 armv7l
Previous/Reset: r58819, No reset
Mode/Status: Gateway, No VPN, Stable, SFE disabled,wlan0 5GHz AC/N Mixed VHT80 WPA2-Personal-CCMP, wlan1 2.4Ghz N-only HT40 WPA2-Personal-CCMP, DDNS (SSL/TLS)
Issues/Errors: None

Snowflakes are steadily falling on my WRT3200ACM, Linksys EA6400 & EA6500 GUI
(The 2 Linksys are used as a wireless access point, and
physically wired to the primary router using an ethernet cable)

Happy HolidayZ
Thank you!

[marcus83]

Router: Linksys WRT3200ACM
Firmware: DD-WRT v3.0-r58892 std (12/25/24)
File: ddwrt-linksys-wrt32x-webflash.bin
Kernel: Linux 6.1.121-rt28 #823 SMP Wed Dec 25 02:55:27 +07 2024 armv7l
Previous/Reset: DD-WRT v3.0-r58881 std (12/24/24) / No
Mode/Status: AP,VPN / Stable.
Issues/Errors: None.

a curiosity, but has the developer added the snow effect on the browser?

[egc]

[Fritzbuf]

Router: Linksys WRT3200ACM
Reset: no
Issues/Errors: no

- update works good without any problems
- VPN WireGuard
- USB
- DDNS
- cron
- Port Forwarding
- FTP
- Samba
- WLAN offline, I use UniFi AP AC LITE as access Point!
- Lan

all ok for now, thank you for the good work!!!!!...... and also for snowflake

[marcus83]

[kernel-panic69]

SEE: Snow in GUI

[Oldsmobile_Mike]

WRT3200ACM w/58892 working well here all day so far. I hadn't updated since this past January. Smooth update, no glitches, full speed from my ISP. The snow effect is cute. Hopefully can get back to updating more frequently at some point here.

[missddwrt]

OpenVPN with ProtonVPN is still broken on linksys models.............

[Monza]

[stangdriverdoug]

My first update on this Router (WRT3200ACM) since 2019. Had the need to tweak my home network a bit and figured why not. The interface looks really nice, and it's handling about 40-45 clients nice and smooth.