[blkt]

Welcome to Broadcom r58892 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r58881 (mirror)

• OpenVPN 2.6.12: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r58892

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[baboeska]

Router/Version: Linksys EA6900 (XAC-1900 software modded)
File/Kernel: r58892
Previous/Reset: 58699
Mode/Status: Android tethering, 2.4ghz wifi x3
Issues/Errors:
No issues, thank you very much


* *
*
*
*
^
-+-
/ \

^
/|\
/ | \
|

Um ascii graphics fail, meant to be snow and a man and a tree
Merry Christmas

[KACTET]

Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r58892 std / Linux 4.4.302-rt232-st59 #12750 SMP Wed Dec 25 04:01:39 +07 2024 armv7l
Previous/Reset: r58881 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 6:12 hours
CPU Temperature: CPU 55.2 °C / WL0 36.0 °C / WL1 0.0 °C (ambient temperature 16.0 °C)
Issues/Errors: no

As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."

If your router's light turns red, don't worry. Internet connection is ok.

Thank you BS and gurus!

[IONK]

Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r58892) / Linux 4.4.302-rt232-st59 #12742 SMP Tue Dec 24 18:51:51 +07 2024 armv7l
Previous/Reset: DD-WRT v3.0-r58858 std (12/21/24) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + SSH (public key) + DDNS (Dynu.com) + high-speed USB Storage (guide by egc) + WireGuard server + Cron / working
Issues/Errors: none

[KACTET]

Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: dd-wrt.v24-58609_|_r58892_NEWD-2_K3.x-big-RT-N66U.trx / Linux 4.4.302-rt232-st59 #34670 Wed Dec 25 04:29:46 +07 2024 mips
Previous/Reset: 58785 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 9:31 hours
CPU Temperature: WL0 47.5 °C (ambient temperature 21.0 °C)
Issues/Errors: Nothing significant

Incorrect firmware file name 58609.

Thank you BS and gurus!

[rnix]

Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r58892 std (12/25/24)
Kernel: Linux 4.4.302-rt232-st59 #12746 Wed Dec 25 03:32:50 +07 2024 armv7l
Mode: gateway
Previous: r58699
Reset: no
Status: ok
Issues/Errors: none observed


Router/Version: Asus RT-AC66U B1 (using RT-AC68U build)
Firmware: DD-WRT v3.0-r58892 std (12/25/24)
Kernel: Linux 4.4.302-rt232-st59 #12742 SMP Tue Dec 24 18:51:51 +07 2024 armv7l
Mode: gateway
Previous: r58858
Reset: no
Status: ok
Issues/Errors: none observed

Overclocking label "Frequency" has been fixed under Administration tab in webui
Thank you devs!

[tedm]

Router/Version: Netgear R6400 v1
File/Kernel: Linux 4.4.302-rt232-st59 #12742 SMP Tue Dec 24 18:51:51 +07 2024 armv7l
Previous/Reset: October something DD-WRT. No reset done
Mode/Status: OK
Issues/Errors: None

Smooth as glass update from an October 2024 version of DD-WRT. So far it's been up 3 days, it runs a site-to-site VPN in addition to translation to the Internet.

[tedm]

Router/Version: Netgear WNDR4000
File/Kernel: Linux 4.4.302-rt232-st59 #34674 Wed Dec 25 04:37:01 +07 2024 mips
Previous/Reset: No
Mode/Status: OK
Issues/Errors: None

Smooth upgrade from Mega 3.0 October version to DD-WRT v3.0-r58892 mega (12/25/24) Been up 1 day no issues. Used as a node in an AP network not used as a router.

[tedm]

Router/Version: Cisco Valet M10 v1
File/Kernel: Linux 2.6.24.111 #38018 Wed Dec 25 01:39:21 +07 2024 mips
Previous/Reset: DD-WRT/Yes
Mode/Status: OK
Issues/Errors: None

No issues upgrading from a 2021 version of DD-WRT, used https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2024/12-25-2024-r58892/broadcom_K26/dd-wrt.v24-58892_NEWD-2_K2.6_mini.bin