Posted: Sun Nov 24, 2024 20:07 Post subject: New Build - 11/24/2024 - r58699
Welcome to Atheros r58699 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Asus rt-ax89x rev.B2
File/Kernel: 58699 / Linux 6.6.63-rt29 #1681 SMP Sun Nov 24 18:42:40 +07 2024 aarch64
Previous/Reset: 58694\no
Mode/Status: AP, US domain, Advanced Settings manual 30 dBm 2.4 GHz & 5 GHz, SAMBA, MiniDLNA, 3HDDs Ext4 file system (2 via HDD station)
Issues/Errors: Yes
USB Drives not mount correctly at start up, many arrors in log, some of them:
Code:
an 1 00:00:26 DD-WRT kern.info kernel: [ 26.162077] EXT4-fs (sda1): mounted filesystem 5d4b8a5d-8b64-a821-a2cc-a2b290a5ad45 r/w with ordered data mode. Quota mode: none.
Jan 1 00:00:26 DD-WRT user.info : [minidlna] : DLNA Media Server successfully stopped
Jan 1 00:00:26 DD-WRT user.info : [minidlna] : successfully started
Jan 1 00:00:26 DD-WRT user.info : [cron] : successfully started
Jan 1 00:00:26 DD-WRT cron.info cron[2838]: (CRON) STARTUP (fork ok)
Jan 1 00:00:26 DD-WRT cron.info cron[2842]: (CRON) DEATH (can't lock /var/run/crond.pid, otherpid may be 2838: Resource temporarily unavailable)
Jan 1 00:00:26 DD-WRT kern.info kernel: [ 26.249094] nss-dp 3a001600.dp4 eth2: PHY Link up speed: 1000
Jan 1 00:00:26 DD-WRT user.info : [cron] : Error on startup, returncode 1
Jan 1 00:00:26 DD-WRT user.info : [cron] : daemon successfully stopped
Jan 1 00:00:26 DD-WRT local5.err ksmbd: [ksmbd.mountd(manager)/2745]: ERROR: Worker fatally killed: Bus error
Jan 1 00:00:26 DD-WRT local5.info ksmbd: [ksmbd.mountd(manager)/2745]: INFO: Terminated
Jan 1 00:00:26 DD-WRT cron.info cron[2878]: (CRON) STARTUP (fork ok)
Jan 1 00:00:26 DD-WRT cron.info cron[2878]: (crontabs) ORPHAN (no passwd entry)
Jan 1 00:00:26 DD-WRT user.info : [cron] : successfully started
Jan 1 00:00:26 DD-WRT kern.warn kernel: [ 26.439060] EXT4-fs: Ignoring removed nobh option
Jan 1 00:00:26 DD-WRT kern.info kernel: [ 26.457710] EXT4-fs (sdc1): barriers disabled
Jan 1 00:00:26 DD-WRT kern.info kernel: [ 26.461956] EXT4-fs (sdc1): mounted filesystem fc75cd70-6972-d601-d065-cd706972d601 r/w with ordered data mode. Quota mode: none.
Jan 1 00:00:26 DD-WRT user.info : [cron] : daemon successfully stopped
Jan 1 00:00:26 DD-WRT user.info : [cron] : successfully started
Jan 1 00:00:26 DD-WRT cron.info cron[2965]: (CRON) STARTUP (fork ok)
Jan 1 00:00:26 DD-WRT user.debug wsdd2[2785]: 'Terminated' signal received.
Jan 1 00:00:26 DD-WRT user.info wsdd2[2785]: terminating.
Jan 1 00:00:26 DD-WRT user.info : [wsdd2] : windows service discovery daemon successfully stopped
Jan 1 00:00:26 DD-WRT user.info : [wsdd2] : windows service discovery daemon hanging, send SIGKILL
Jan 1 00:00:26 DD-WRT user.info : [wsdd2] : Error on startup, returncode 15
Jan 1 00:00:26 DD-WRT user.info : [wsdd2] : windows service discovery daemon successfully stopped
Jan 1 00:00:26 DD-WRT user.info : [wsdd2] : windows service discovery daemon successfully stopped
Jan 1 00:00:26 DD-WRT local5.err ksmbd: [ksmbd.mountd/3097]: ERROR: Invalid lock entry `2745'
Jan 1 00:00:26 DD-WRT local5.info ksmbd: [ksmbd.mountd/3097]: INFO: Wrote `/var/run/ksmbd.lock'
Jan 1 00:00:26 DD-WRT local5.info ksmbd: [ksmbd.mountd(manager)/3097]: INFO: Started worker
Jan 1 00:00:26 DD-WRT user.info : [ksmbd.mountd] : successfully started
Jan 1 00:00:26 DD-WRT kern.err kernel: [ 26.940551] ksmbd: Reconnect to a new user space daemon
Helps only disable\enable "USB Storage Support" at Service->USB tab.
Joined: 12 Dec 2007 Posts: 899 Location: Pittsburgh, PA USA
Posted: Mon Nov 25, 2024 20:48 Post subject:
Router/Version: Linksys MR7350 x3
File/Kernel: DD-WRT v3.0-r58699 std (11/24/24), Linux 6.6.63-rt29 #1678 SMP Sun Nov 24 16:24:39 +07 2024 aarch64
Previous/Reset: DD-WRT v3.0-r58694 std (11/18/24), last reset at r58389
Mode/Status: Gateway (NSS-ECM), Access Point (DD-WRT firmware,2.4GHz, 5GHZ, WPA2/WPA3, 802.11r/v/k, domain:PANAMA), performance governor, IPV6 (DHCP6 w/ prefix delegation), Entware, DOT via SmartDNS/DNSMasq, OpenVPN server, Wireguard Server + 2 wired access points (2.4GHz, 5GHZ, WPA2/WPA3, 802.11r/v/k, guest network, domain:PANAMA)
Issues/Errors:
Up 7 hours. USB 3.2 stick working properly for Entware and "jffs" partitions. Speed (tested via nPerf.com) is very close to published, which is equal or favorable to the ISP router. Wireguard and OpenVPN servers both working as expected and throughput sufficient to open video files on network shares.
No issues to report.
Thank you Brainslayer. _________________ __________________________
Linksys MR7350
DD-WRT v3.0 STD
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin_r58699 / Linux 3.18.140-d6 #222161 Sun Nov 24 11:20:25 +07 2024 mips
Previous/Reset: r58694 / no
Mode/Status: AP wired and wireless / Up and running for 6:31 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 59468
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 59582
Broadcom
Asus RT-AC87U R - DD-WRT 59582
Asus RT-N66U - DD-WRT 59582
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
I have 1 primary + 2 followers. All running the same firmware and use the same settings besides IP address.
Issues/Errors: One of the node (newly added) became freaky after 24 hours. I was able to get IP and watched a YouTube video. After couple minutes, my computer (connected via WiFi) lost connection and can not get IP any more. I was able to manually set IP address and check the status on the node. I was not working correctly. Tried to ping other nodes from the web-ui and no response. I tried to disable Wlan2 and reenable it. It was not recovered. Unfortunately, I forgot to check the dmesg before I reboot my node.
After reboot, the node seems recovered. (all the other two node were not rebooted). Let me know if there is any log I can get to help if the problem happens again.
Edit: This happened again. My two follower nodes are connected with each other. But, the main router does not connect to them.
when check the wireless status. It seems to know there are 2 followers
Last edited by minchinghowrt on Wed Nov 27, 2024 8:02; edited 1 time in total
Router/Version: R9000 x1
File/Kernel: Previous/Reset: no
Mode/Status: WDS AP, openvpn on WAN, wireguard on LAN - working
Issues/Errors: Every time I upgrade the firmware on this router it won't come back up on the reboot. It takes several reboots for it to function again. Long time problem.
Joined: 13 Aug 2013 Posts: 7009 Location: Romerike, Norway
Posted: Wed Nov 27, 2024 19:17 Post subject:
Router Modell: Netgear R7800
Firmware Version: DD-WRT v3.0-r58699 std (11/24/24)
Kernel Version: Linux 6.1.119-rt28 #496 SMP PREEMPT Sun Nov 24 07:43:44 +07 2024 arm
Issues: Reached 22 hours uptime with NSS-ECM, but IPv6 routing does not work. Cannot reach any web sites. ping6 work though. Turned off NSS-ECM to restore routing.
Joined: 12 Dec 2007 Posts: 899 Location: Pittsburgh, PA USA
Posted: Thu Nov 28, 2024 0:21 Post subject:
Per Yngve Berg wrote:
Router Modell: Netgear R7800
Issues: Reached 22 hours uptime with NSS-ECM, but IPv6 routing does not work. Cannot reach any web sites. ping6 work though. Turned off NSS-ECM to restore routing.
There is a default route missing if you run "ip -6 route". To work around it, I had added the following two lines to my startup script. You'll probably need to change the gateway IPv6 address since it's MAC-based.
Code:
sleep 30
ip -6 route add default via fe80::4e96:14ff:fe6e:fcf5 dev eth0 metric 1024
