Posted: Thu Nov 14, 2024 15:13 Post subject: New Build - 11/14/2024 - r58689
Welcome to Broadcom r58689 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_58689 std / Linux 4.4.302-rt232-st57 #12580 SMP Thu Nov 14 06:08:21 +07 2024 armv7l
Previous/Reset: r58662 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 3:11 hours
CPU Temperature: CPU 69.1 °C / WL0 42.0 °C / WL1 0.0 °C (ambient temperature 20.0 °C)
Issues/Errors: no
As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."
The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
But this does not affect the work.
Just relax
1. CPU temperature is not displayed correctly.
CPU temperature readings started changing after one second from 68.1 - 69.1 °C
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 58389
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 58785
Broadcom
Asus RT-AC87U R - DD-WRT 58785
Asus RT-N66U - DD-WRT 58785
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Anyone have any issues applying this build or the last r58662, I got my R7000 and backup AC2400 in a boot loop and had to use the Netgear nmrpflash to recover, back to running r58627.
I was able to get them into the boot loop applying via wifi or ethernet cable, I just wanted to check, usually use cable.
Posted: Fri Nov 15, 2024 19:41 Post subject: Asus RT-AC68U + 2 Linksys E2000
Asus RT-AC68U
Firmware: DD-WRT v3.0-r58689 std (11/14/24) - (previous r58627)
Kernel: Linux 4.4.302-rt232-st57 #12572 SMP Wed Nov 13 13:03:43 +07 2024 armv7l
5Ghz (Mixed) with 80Mhz.302- channel width: Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz & 5Ghz: Ok
Reset: No
Status: Ok
Uptime: 2 min
CPU Temperature: CPU 74.1 °C / WL0 51.2 °C / WL1 47.3 °C
Linksys E2000 (2 in use)
Firmware: DD-WRT v3.0-r58689 mega (11/14/24) - (previous r58627)
Kernel: Linux 4.4.302-rt232-st57 #34020 Thu Nov 14 06:00:49 +07 2024 mips
2.4Ghz (NG-mixed) with 40Mhz channel width: Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz: Ok
Reset: No
Status: Ok
Uptime: 10 min & 20 min
CPU Temperature: WL0 56.0 °C / WL0 54.0 °C
All devices working as AP's each with individual 1Gb wired connections to main firewalls.
As always, huge thanks to BS and everyone else contributing
Posted: Fri Nov 15, 2024 19:58 Post subject: New Build - 11/14/2024 - r58689
Netgear r7000 Up and running for more than 24hours seems like a terrific build keep it up devs you are doing a great job plus running ctf ctf and fa also almost forgot.