[blkt]

Welcome to Broadcom r58689 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r58662 (mirror)

• OpenVPN 2.6.12: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r55799 r55819 r56029 r56119 r56182 r56237 r56326 r56359 r56380 r56490 r56721 r56820 r56932 r56941 r57200 r57447
r57538 r57564 r57595 r57707 r57753 r57793 r57834 r57956 r58070 r58124 r58163 r58207 r58244 r58283 r58362 r58381
r58389 r58464 r58531 r58568 r58627 r58662 r58689

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[IONK]

Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r58689) / Linux 4.4.302-rt232-st57 #12572 SMP Wed Nov 13 13:03:43 +07 2024 armv7l
Previous/Reset: DD-WRT v3.0-r58627 std (11/02/24) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + SSH (public key) + DDNS (Dynu.com) + high-speed USB Storage (guide by egc) + WireGuard server + Cron / working
Issues/Errors: none

[KACTET]

Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_58689 std / Linux 4.4.302-rt232-st57 #12580 SMP Thu Nov 14 06:08:21 +07 2024 armv7l
Previous/Reset: r58662 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 3:11 hours
CPU Temperature: CPU 69.1 °C / WL0 42.0 °C / WL1 0.0 °C (ambient temperature 20.0 °C)
Issues/Errors: no

As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."

The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
But this does not affect the work.
Just relax

1. CPU temperature is not displayed correctly.
CPU temperature readings started changing after one second from 68.1 - 69.1 °C

Thank you BS and gurus!

[par13del]

Anyone have any issues applying this build or the last r58662, I got my R7000 and backup AC2400 in a boot loop and had to use the Netgear nmrpflash to recover, back to running r58627.

I was able to get them into the boot loop applying via wifi or ethernet cable, I just wanted to check, usually use cable.

[Newbrain]

Asus RT-AC68U
Firmware: DD-WRT v3.0-r58689 std (11/14/24) - (previous r58627)
Kernel: Linux 4.4.302-rt232-st57 #12572 SMP Wed Nov 13 13:03:43 +07 2024 armv7l
5Ghz (Mixed) with 80Mhz.302- channel width: Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz & 5Ghz: Ok
Reset: No
Status: Ok
Uptime: 2 min
CPU Temperature: CPU 74.1 °C / WL0 51.2 °C / WL1 47.3 °C

Linksys E2000 (2 in use)
Firmware: DD-WRT v3.0-r58689 mega (11/14/24) - (previous r58627)
Kernel: Linux 4.4.302-rt232-st57 #34020 Thu Nov 14 06:00:49 +07 2024 mips
2.4Ghz (NG-mixed) with 40Mhz channel width: Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz: Ok
Reset: No
Status: Ok
Uptime: 10 min & 20 min
CPU Temperature: WL0 56.0 °C / WL0 54.0 °C

All devices working as AP's each with individual 1Gb wired connections to main firewalls.

As always, huge thanks to BS and everyone else contributing

[Harb1]

Netgear r7000 Up and running for more than 24hours seems like a terrific build keep it up devs you are doing a great job plus running ctf ctf and fa also almost forgot.