Posted: Wed Oct 30, 2024 20:27 Post subject: Netgear WNDR4500 v1 restarts after every 1 hour
Firmware: DD-WRT v3.0-r58568 giga (10/15/24)
schedule is disabled, cron is disabled.
I have vlan set up. And restart happens only when I attach something into lan port.
I have multiple devices connected to wifi and those seems not to cause this trouble. but as soon as I connect something to lan, restarts start. And they occur exactly after one hour.
Logs doesnt have anything helpful.
following is serial log when restart happens (DROP log line is ok. and then suddenly it crashes and restart sequence starts)
CFE for WNDR4500 version: v1.0.3
Build Date: Thu Jul 21 19:28:03 CST 2011
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Found an ST compatible serial flash with 32 64KB blocks; total size 2MB
Found a Samsung NAND flash with 2048B pages or 128KB blocks; total size 128MB
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138
CPU type 0x19749: 600MHz
Tot mem: 131072 KBytes
Device eth0: hwaddr 84-1B-5E-D8-D4-47, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Loader:raw Filesys:tftp Dev:eth0 File:192.168.1.2:vmlinuz Options:(null)
Loading: Failed.
Could not load 192.168.1.2:vmlinuz: Timeout occured
Checking crc...Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
Loading: .... 1623632 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
[ 0.000000] Linux version 4.4.302-rt232-st56 (root@linux.shellfast) (gcc version 13.1.0 (OpenWrt GCC 13.1.0 r22658+9-2c530fcb97) ) #33628 Tue Oct 15 05:14:10 +07 2024
[ 0.000000] prom_init:194
[ 0.000000] CPU0 revision is: 00019749 (MIPS 74Kc)
[ 0.000000] Found ST compatible serial flash with 32 64KB blocks; total size 2MB
[ 0.000000] found nvram at 1F0000
[ 0.000000] something wrong here. do not remap
