Posted: Mon Sep 02, 2024 15:48 Post subject: New Build - 09/02/2024 - r58283
Welcome to Atheros r58283 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin_r58283 / Linux 3.18.140-d6 #214921 Fri Aug 30 14:42:35 +07 2024 mips
Previous/Reset: r58244 / no
Mode/Status: AP wired and wireless / Up and running for 2:15 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 59468
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 59468
Broadcom
Asus RT-AC87U R - DD-WRT 59468
Asus RT-N66U - DD-WRT 59468
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Seems to be working well with the exception of eoip tunnels still. It goes in to a boot loop once I connect internet to the wan port or if I enabled static ip addressing on the wan.
I have attached the dmesg and mtd strings in this thread below:R58224M
I haven't done reset but with 58283 my both R7800 LAN ports are fine...but i do have VLAN's or dedicated bridges on those...do you want me to do a reset and try after... ?
Or this guy has the eth0 (defwan) problem, if that bug returned..by any chance _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 58184 WAP
TP-Link WR1043NDv2 -DD-WRT 59369 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 59369 Gateway/DoT,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 59468 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 59369 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Dynalink DL-WRX36-DDWRT 59369
Broadcom
Netgear R7000 --DD-WRT 59468 Gateway/DNScrypt-proxy2/AD-Block,IPset Firewall,Forced DNS,x4VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Router/Version: Netgear R9000
Update method: CLI using PuTTY
File/Kernel: r58283 / Linux 4.9.337 #747 SMP Sun Aug 25 01:08:10 +07 2024 armv7l
Previous/Reset: r58224 / No
Mode/Status: Gateway / Working normally 3.5 hrs
Issues/Errors: Wifi status lights are off
Router/Version: Netgear R7500v2
Update method: CLI using PuTTY
File/Kernel: r58283 / Linux 6.1.107-rt28 #472 SMP PREEMPT Sun Sep 1 14:30:36 +07 2024 arm
Previous/Reset: r58224 / No
Mode/Status: Wired AP / Working normally 3.5 hrs
Issues/Errors: None
Joined: 08 May 2018 Posts: 15512 Location: Texas, USA
Posted: Tue Sep 03, 2024 0:19 Post subject:
Closed as "invalid" and "Maxim" is @lobyte who's been around for a while, but seems to have lost 'is way. Now @KACET: Can you confirm THIS issue? I would venture to guess that it's not an issue, other than cache or using add-ons which has already been discussed ad nauseum. So has co-mingling Internet traffic with surfing the webUI. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Joined: 12 Dec 2007 Posts: 899 Location: Pittsburgh, PA USA
Posted: Tue Sep 03, 2024 14:49 Post subject:
Router/Version: Netgear R7800 x 3
File/Kernel: DD-WRT v3.0-r58283 std (09/02/24)
Previous/Reset: DD-WRT v3.0-r58244 std (08/30/24), last reset at r57707
Mode/Status: Gateway (SFE), Access Point (DD-WRT firmware,2.4GHz, 5GHZ, WPA2/WPA3, 802.11r/v/k), IPV6 (DHCP6 w/ prefix delegation), Entware, DOT via SmartDNS/DNSMasq, OpenVPN server, Wireguard Server + 2 wired access points (DD-WRT firmware,2.4GHz, 5GHZ, WPA2/WPA3, 802.11r/v/k)
Issues/Errors:
Up 22 hours. USB 3.2 stick working properly for Entware and "jffs" partitions. Speed (tested via nPerf.com) is very close to published, which is equal or favorable to the ISP router. Wireguard and OpenVPN servers both working as expected and throughput sufficient to open video files on network shares.
Would have been up longer but the power flickered a few times yesterday. Glad it wasn't during upgrade . No issues to report.
Thank you Brainslayer. _________________ __________________________
Linksys MR7350
DD-WRT v3.0 STD
My LAN port configuration is standard, no vLANs. One cable, plugged into port #4, going to an 8 port dumb switch. No issues. _________________ __________________________
Linksys MR7350
DD-WRT v3.0 STD