[grorico]

Hello,

I don't understand what's going on.

I migrate my WRT3200ACM to dd-wrt without any problems.
I connect to the admin web interface without any problems by connecting to the default wifi network (dd-wrt).

But as soon as I put a password for access to this wifi network (and whatever this password is) I can no longer access the admin web interface.

Thank you in advance for your help.
Grorico.

[Monza]

Since there have been no responses I will suggest this link could help . . .

https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=311117

I'm not sure, reading your description, if you have already configured the router/wifi or if you are trying to do so via wifi?? A better description of your issue might get more responses. =)

[grorico]

Hello,

Thank you very much for your answer and for the link.
I'll try again by detailing a little more ...

Following the installation of dd-wrt, I connect to the default wifi network. I go to the web administration interface, I change the login and password to access the web interface (ssid: 'dd-wrt' without a default password).

Then I select the wifi tab -> security. I check: WPA3 Personal / SAE + CCMP-128 (AES) and I enter a password. And this on Wlan0 and Wlan1.
Once the settings are applied, I reconnect to the wifi network by entering the password this time.
Then I go to the web interface which seems to work and asks me for the connection password. But once I enter the password, the page does not load and the web interface becomes inaccessible until I restart the router. If I restart the router the same sequence occurs again.

Hope someone can help.
Eric.

[kernel-panic69]

You should be using WPA2 Personal, not WPA3. Not sure how many client devices even support WPA3 if they aren't brand new or have the updated drivers that support it.

[Monza]