Posted: Tue Oct 08, 2024 13:58 Post subject: Web interface access and wifi password
Hello,
I don't understand what's going on.
I migrate my WRT3200ACM to dd-wrt without any problems.
I connect to the admin web interface without any problems by connecting to the default wifi network (dd-wrt).
But as soon as I put a password for access to this wifi network (and whatever this password is) I can no longer access the admin web interface.
I'm not sure, reading your description, if you have already configured the router/wifi or if you are trying to do so via wifi?? A better description of your issue might get more responses. =)
Thank you very much for your answer and for the link.
I'll try again by detailing a little more ...
Following the installation of dd-wrt, I connect to the default wifi network. I go to the web administration interface, I change the login and password to access the web interface (ssid: 'dd-wrt' without a default password).
Then I select the wifi tab -> security. I check: WPA3 Personal / SAE + CCMP-128 (AES) and I enter a password. And this on Wlan0 and Wlan1.
Once the settings are applied, I reconnect to the wifi network by entering the password this time.
Then I go to the web interface which seems to work and asks me for the connection password. But once I enter the password, the page does not load and the web interface becomes inaccessible until I restart the router. If I restart the router the same sequence occurs again.
Joined: 08 May 2018 Posts: 15250 Location: Texas, USA
Posted: Mon Oct 14, 2024 19:41 Post subject:
You should be using WPA2 Personal, not WPA3. Not sure how many client devices even support WPA3 if they aren't brand new or have the updated drivers that support it. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Following the installation of dd-wrt, I connect to the default wifi network.
I go to the web administration interface, I change the login and password to access the web interface (ssid: 'dd-wrt' without a default password).
If I understand correctly you are doing your setup via a wifi connection? If so I can't be of much help as I always set my routers up via a wired connection/web browser.
Once installed, using a web browser, I use this info to connect to the DD-WRT UI:
Linksys Default Router IP Address: 192.168.1.1
DD-WRT Default User Name: root
DD-WRT Default Password: admin
I make all setup changes, saving/applying after each change. I setup EVERYTHING including my wifi settings at the same time. After all setting are made and saved I reboot the router. Only then do I attempt to connect via wifi.
First change I suggest is you select WPA2 Personal and CCMP-128(AES) and ONLY those settings for wireless security. WPA3 Personal is known to fail for almost everyone.
Sorry I'm not much help, hopefully other users will chime in. =) Edit: on posting I see you have a response already.