Posted: Fri Sep 20, 2024 8:23 Post subject: New Build - 09/20/2024 - r58389
Welcome to x86 / x64 r58389 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
System - Dell OptiPlex 5050 with core i7 6700 & 16 GB Ram
Version - Full VGA 2 GB version (with license)
Previous Version - 58362
No issues so far after a few hours. _________________ 2 R7800's (Kong OpenWRT 23.05) as access points
X86_64 build PC (DDWRT Build r58568)
3 R7000's (DDWRT build r53843) not in use
Netgear WNDR 3400 (DDWRT r55630) not in use
Netgear DGND 3700 (with OpenWRT) not in use
WRT54G-TM
Posted: Wed Sep 25, 2024 18:49 Post subject: It's good
Router/Version: i4770k 16GB ram
File/Kernel: x64 vga full webupgrade
Previous/Reset: Nope
Mode/Status: NAS/Router/Gateway
Issues/Errors: None it's been stable as can be.
Did use a CPU governor command to enable the speed step on the CPU otherwise it ran at turbo speed 100%
Joined: 16 Jun 2006 Posts: 223 Location: Germany, BW
Posted: Thu Sep 26, 2024 11:42 Post subject:
Still the issue with the USB3-Network-Adapter, not automatically loading during boot process. Have to do it via Startup-Script, see here: --> Ticket 7719 <--
Syslog:
Sep 25 21:03:06 AP-Test kern.info kernel: [ 300.560804] usb 3-5: new SuperSpeed USB device number 2 using xhci_hcd
Sep 25 21:03:06 AP-Test kern.info kernel: [ 300.598060] usb 3-5: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 1.00
Sep 25 21:03:06 AP-Test kern.info kernel: [ 300.603795] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 25 21:03:06 AP-Test kern.info kernel: [ 300.609264] usb 3-5: Product: AX88179
Sep 25 21:03:06 AP-Test kern.info kernel: [ 300.614595] usb 3-5: Manufacturer: ASIX Elec. Corp.
Sep 25 21:03:06 AP-Test kern.info kernel: [ 300.619861] usb 3-5: SerialNumber: 007CC2C64Bxxxx
Thats it, the driver is not loading