New Build - 10/05/2024 - r58464

Post new topic   Reply to topic    DD-WRT Forum Index -> Qualcomm Atheros based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5995

PostPosted: Sat Oct 05, 2024 12:15    Post subject: New Build - 10/05/2024 - r58464 Reply with quote
Welcome to Atheros r58464 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.


CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r58389 (mirror)

OpenVPN 2.6.12: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r55799 r55819 r56029 r56119 r56182 r56237 r56326 r56359 r56380 r56490 r56721 r56820 r56932 r56941 r57200 r57447
r57538 r57564 r57595 r57707 r57753 r57793 r57834 r57956 r58070 r58124 r58163 r58207 r58244 r58283 r58362 r58381
r58389 r58464

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1117

PostPosted: Sat Oct 05, 2024 12:38    Post subject: Reply with quote
Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000
File/Kernel: DD-WRT v3.0-r58464 std (10/05/24) / Linux 4.9.337 #747 SMP Sun Aug 25 01:08:10 +07 2024 armv7l
Previous/Reset: DD-WRT v3.0-r58389 std (09/20/24) / Linux 4.9.337 #747 SMP Sun Aug 25 01:08:10 +07 2024 armv7l
Mode/Status: Gateway / Working Normally
Issues/Errors: Log file is showing UTC time for kernel events. DNSMasq events are reporting properly.

_________________
Netgear R9000
DD-WRT v3.0-r59582 std (02/09/25)
Linux 4.9.337 #762 SMP Sat Jan 11 09:01:19 +07 2025 armv7l

Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
SmartDNS (using Cloudflare, Quad9 and Google), no QoS, no SFE
2.4GHz: dd-wrt, NG-Mixed, ACK Timing 3150, WPA2 w/AES
5GHz: dd-wrt, AC/N Mixed, ACK Timing 3150, WPA2 w/AES
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/40Mbps
matjazk
DD-WRT User


Joined: 21 Aug 2019
Posts: 121
Location: Here, There And Everywhere

PostPosted: Sat Oct 05, 2024 17:39    Post subject: Reply with quote
Do WiFi LEDs work now on R9000?

Last edited by matjazk on Sat Oct 05, 2024 20:46; edited 1 time in total
KACTET
DD-WRT User


Joined: 01 May 2022
Posts: 407

PostPosted: Sat Oct 05, 2024 19:26    Post subject: Reply with quote
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin_r58464 / Linux 3.18.140-d6 #218489 Sat Oct 5 11:03:35 +07 2024 mips
Previous/Reset: r58381 / no
Mode/Status: AP wired and wireless / Up and running for 6:32 hours
Issues/Errors: Nothing significant

The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch

Thank you BS and gurus!

_________________
Atheros
Netgear XR500 Nighthawk - DD-WRT 59468
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 59582
Broadcom
Asus RT-AC87U R - DD-WRT 59582
Asus RT-N66U - DD-WRT 59582
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
James Greystone
DD-WRT User


Joined: 20 Nov 2011
Posts: 224

PostPosted: Sun Oct 06, 2024 1:28    Post subject: Reply with quote
matjazk wrote:
Do WiFi LEDs work now on R9000?


They do not. However the build appears solid, up 12 hours so far.
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1117

PostPosted: Sun Oct 06, 2024 1:43    Post subject: Reply with quote
James Greystone wrote:
matjazk wrote:
Do WiFi LEDs work now on R9000?


They do not. However the build appears solid, up 12 hours so far.

Agreed. I turned on my lights and the Wi-Fi lights are off. I care not a bit. The build seems stable

_________________
Netgear R9000
DD-WRT v3.0-r59582 std (02/09/25)
Linux 4.9.337 #762 SMP Sat Jan 11 09:01:19 +07 2025 armv7l

Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
SmartDNS (using Cloudflare, Quad9 and Google), no QoS, no SFE
2.4GHz: dd-wrt, NG-Mixed, ACK Timing 3150, WPA2 w/AES
5GHz: dd-wrt, AC/N Mixed, ACK Timing 3150, WPA2 w/AES
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/40Mbps
dun4cheap
DD-WRT User


Joined: 14 Mar 2012
Posts: 320

PostPosted: Sun Oct 06, 2024 2:30    Post subject: Reply with quote
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin_r58464 / Linux 3.18.140-d6 #218489 Sat Oct 5 11:03:35 +07 2024 mips
Previous/Reset:DD-WRT v3.0-r58376 std (09/11/24) <---Special alpha

When an eoip tunnel is enabled it goes in to a bootloop and resets. Reverted back to the special alpha version posted in a different thread and eoip tunnels work.


Router ModelLinksys MX4300
Firmware Version DD-WRT v3.0-r58376 std (09/11/24) <---Special alpha
Kernel VersionLinux 6.6.50-rt29 #1225 SMP Wed Sep 11 05:46:12 +07 2024 aarch64

https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=337154&start=76

_________________
5 Linksys MX4300 LN1301 DD-WRT v3.0-r58376 std (09/11/24)

6 Asus AC5300 R55109 std 2/9/2024
3 Buffalo WZR-1750DHP - DD-WRT v3.0-r29218 std (03/07/16)


6 Buffalo WZR-HP-G300NH2
DD-WRT v3.0-r29218 std (03/07/16)

all in eoip configurations, some with vlans running wep and wpa.

Some with proftp enabled and smb enabled. Mixed ISP from Timewarner cable, Cox Cable and AT&T Uverse.
lexridge
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 1837
Location: WV, USA

PostPosted: Sun Oct 06, 2024 3:27    Post subject: Reply with quote
dun4cheap wrote:
When an eoip tunnel is enabled it goes in to a bootloop and resets. Reverted back to the special alpha version posted in a different thread and eoip tunnels work.


I have no idea why this was fixed for the alpha build but not merged into the main builds. When that test build was released and posted, @BrainSlayer just wanted confirmation that it worked, which was verified. Maybe he forgot due to more pressing issues. Who knows? The only active development I have seen in recent weeks was for adding some Buffalo AX routers. Not really much more except for some kernel 6.6 updates.

_________________
- Linksys EA8500: I-Gateway, WAP/VAP 5ghz only. Features: WDS-AP, VLANs, Samba, WG, Entware - r59429
- Linksys EA8500: 802.11s Secondary w/VLAN Trunk over 5ghz - r59171
- Linksys MX4300: 802.11s Primary w/VLAN Trunk over 5ghz. 2.4ghz WAP/VAP only - r59171
- Linksys MX4300 (WAP/VAP (7)) Multiple VLANs over single trunk port. Entware/Samba r59451
- Linksys MR7350: WDS Station for extended Ethernet r59451
- Linksys Velop WHW03v1 x2: OpenWRT w/GRETAP tunnel for VLANs on VAPs
- OSes: Fedora 40, 10 RPis (2,3,4,5), 23 ESP8266s: Straight from Amiga to Linux in '95, never having owned a Windows PC.

- Forum member #248
dun4cheap
DD-WRT User


Joined: 14 Mar 2012
Posts: 320

PostPosted: Sun Oct 06, 2024 3:50    Post subject: Reply with quote
lexridge wrote:
dun4cheap wrote:
When an eoip tunnel is enabled it goes in to a bootloop and resets. Reverted back to the special alpha version posted in a different thread and eoip tunnels work.


I have no idea why this was fixed for the alpha build but not merged into the main builds. When that test build was released and posted, @BrainSlayer just wanted confirmation that it worked, which was verified. Maybe he forgot due to more pressing issues. Who knows? The only active development I have seen in recent weeks was for adding some Buffalo AX routers. Not really much more except for some kernel 6.6 updates.


@lexridge, thanks, I am not sure why but I will continue trying on each update. Maybe bs will see this. You have a serial cable for this router, maybe you can enable the eoip tunnel and see if you can send another log of it?

Thanks,

_________________
5 Linksys MX4300 LN1301 DD-WRT v3.0-r58376 std (09/11/24)

6 Asus AC5300 R55109 std 2/9/2024
3 Buffalo WZR-1750DHP - DD-WRT v3.0-r29218 std (03/07/16)


6 Buffalo WZR-HP-G300NH2
DD-WRT v3.0-r29218 std (03/07/16)

all in eoip configurations, some with vlans running wep and wpa.

Some with proftp enabled and smb enabled. Mixed ISP from Timewarner cable, Cox Cable and AT&T Uverse.
lexridge
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 1837
Location: WV, USA

PostPosted: Sun Oct 06, 2024 4:02    Post subject: Reply with quote
dun4cheap wrote:
You have a serial cable for this router, maybe you can enable the eoip tunnel and see if you can send another log of it?


I no longer have that configuration as I have been onto other things. However, you can do this yourself with this or any release, without a serial cable by doing the #strings /dev/mtd26 command and post the output here as an attachment. I am sure since it still doesn't work with latest releases, it has to be dumping the kernel which this command would confirm.

I have been focusing most of my time on 802.11s and Transmit Power issues atm.

_________________
- Linksys EA8500: I-Gateway, WAP/VAP 5ghz only. Features: WDS-AP, VLANs, Samba, WG, Entware - r59429
- Linksys EA8500: 802.11s Secondary w/VLAN Trunk over 5ghz - r59171
- Linksys MX4300: 802.11s Primary w/VLAN Trunk over 5ghz. 2.4ghz WAP/VAP only - r59171
- Linksys MX4300 (WAP/VAP (7)) Multiple VLANs over single trunk port. Entware/Samba r59451
- Linksys MR7350: WDS Station for extended Ethernet r59451
- Linksys Velop WHW03v1 x2: OpenWRT w/GRETAP tunnel for VLANs on VAPs
- OSes: Fedora 40, 10 RPis (2,3,4,5), 23 ESP8266s: Straight from Amiga to Linux in '95, never having owned a Windows PC.

- Forum member #248
ssergey
DD-WRT Novice


Joined: 17 Jan 2014
Posts: 39

PostPosted: Sun Oct 06, 2024 5:24    Post subject: Reply with quote
Can you please tell me if SmartDNS Resolver is working? Several builds are not working
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 15535
Location: Texas, USA

PostPosted: Sun Oct 06, 2024 5:33    Post subject: Reply with quote
Or you have a misconfiguration.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6783
Location: UK, London, just across the river..

PostPosted: Sun Oct 06, 2024 10:31    Post subject: Reply with quote
ssergey wrote:
Can you please tell me if SmartDNS Resolver is working? Several builds are not working


kernel-panic69 wrote:
Or you have a misconfiguration.


ssergey It is working as it should...tested on Dynalink DL-WRX36 and on XR500 -- both 58464 and SmartDNS has been working ever since, (better that Gen Z) indeed

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 58184 WAP
TP-Link WR1043NDv2 -DD-WRT 59369 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 59369 Gateway/DoT,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 59468 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 59369 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Dynalink DL-WRX36-DDWRT 59369
Broadcom
Netgear R7000 --DD-WRT 59582 Gateway/DNScrypt-proxy2/AD-Block,IPset Firewall,Forced DNS,x4VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913


Last edited by Alozaros on Sun Oct 06, 2024 21:02; edited 1 time in total
ssergey
DD-WRT Novice


Joined: 17 Jan 2014
Posts: 39

PostPosted: Sun Oct 06, 2024 12:18    Post subject: Reply with quote
I'm afraid of confusing the chronology, but after another firmware update Netgear WNDR3800 was left without working DNS service. The configuration was as follows:
Code:
server-tls 1.1.1.1:853 -host-name cloudflare-dns.com -tls-host-verify cloudflare-dns.com
server-tls 1.0.0.1:853 -host-name cloudflare-dns.com -tls-host-verify cloudflare-dns.com
server-tls [2606:4700:4700::1111]:853 -host-name cloudflare-dns.com -tls-host-verify cloudflare-dns.com
server-tls [2606:4700:4700::1001]:853 -host-name cloudflare-dns.com -tls-host-verify cloudflare-dns.com
server-https https://1.1.1.1/dns-query -host-name cloudflare-dns.com -tls-host-verify cloudflare-dns.com http-host cloudflare-dns.com
server-https https://1.0.0.1/dns-query -host-name cloudflare-dns.com -tls-host-verify cloudflare-dns.com http-host cloudflare-dns.com
server-https https://[2606:4700:4700::1001]/dns-query -host-name cloudflare-dns.com -tls-host-verify cloudflare-dns.com http-host cloudflare-dns.com
server-https https://[2606:4700:4700::1111]/dns-query -host-name cloudflare-dns.com -tls-host-verify cloudflare-dns.com http-host cloudflare-dns.com

And it stopped working. When trying to send a query to the router's internal address:
Quote:
dig @195.0.1.254 -p 6053 google.com

there was no response. Then I changed the configuration to this:
Quote:
server 8.8.8.8 -bootstrap-dns
server-tls XXXXXX.dns.nextdns.io:853
server-https https://dns.nextdns.io/XXXXXX

Nothing changed, no responses either. Now I've upgraded to DD-WRT v3.0-r58464 std (10/05/24) and the answers started coming in
Quote:
dig @195.0.1.254 -p 6053 google.com
google.com. 3 IN A 74.125.205.101

I'm at a loss as to what happened and why it stopped working
It's working again now.
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6783
Location: UK, London, just across the river..

PostPosted: Sun Oct 06, 2024 21:00    Post subject: Reply with quote
ssergey Life is a mystery same, as the mystery you ware into... Cool
-cloudflare-dns.com those had an outrage https://thehackernews.com/2024/10/cloudflare-thwarts-largest-ever-38-tbps.html
-no idea why you have such a SmartDNS "cloud me flare" config..but you know better than me..
-1 or 2 lines (diff IP's) of the same resolver would be sufficient enough, no need of guacamole
-although it will work, its not a good practice to mix https and tls servers in the same config...i guess one will be prioritized than another...
- server 8.8.8.8 -bootstrap-dns - bootstrap DNS is not very much needed, nut anyway...
-to use DNS4 & DNS6 you also need an IPv6 i believe...(we dont know about your settings do we)
-Glad that everything is working, again (if Gen Z was on the same page would be great...)

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 58184 WAP
TP-Link WR1043NDv2 -DD-WRT 59369 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 59369 Gateway/DoT,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 59468 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 59369 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Dynalink DL-WRX36-DDWRT 59369
Broadcom
Netgear R7000 --DD-WRT 59582 Gateway/DNScrypt-proxy2/AD-Block,IPset Firewall,Forced DNS,x4VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Qualcomm Atheros based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum