Posted: Mon Sep 09, 2024 4:55 Post subject: New Build - 09/09/2024 - r58362
Welcome to x86 / x64 r58362 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
System - Dell OptiPlex 5050 with core i7 6700 & 16 GB Ram
Version - Full VGA 2 GB version (with license)
Previous Version - The previous latest release
I installed this. It is working so far but still has the CPU maxed out issue. _________________ Custom computer w/ i7-13700T, 16GB DDR5 Ram, X710-T4L, i226 four port, RLTK 8111 four port, RLTK 8127 & dual AQC113 M2 slot card. Currently running on OpenWRT & Adguard Home. Plan to get DDWRT with Adguard running soon.
GL.iNET GL-BE9300 Flint 3 with OpenWRT as an AP
GL.iNET GL-MT6000 Flint 2 with OpenWRT as an AP
GL INET GL-BE3600 Slate 7 Travel Router with OpenWRT as a travel router
2 R7800's (DDWRT Build r60586) Not in use
3 R7000's (DDWRT build r64137) one used as a bridge
WRT54G-TM not in use
Joined: 16 Jun 2006 Posts: 231 Location: Germany, BW
Posted: Tue Sep 10, 2024 9:39 Post subject:
cml750 wrote:
I installed this. It is working so far but still has the CPU maxed out issue.
I think this will not change.
It's my understanding that setting the cpufreq-Governor to Modus "performance" is on purpose, maybe for getting better WAN speed and latency. what seems to be an issue on older devices. There are some older postings about this.
flood404 provided the initial Information to solve the Turbo-Mode behaviour, you can read a summary --> here <--.
I installed this. It is working so far but still has the CPU maxed out issue.
I think this will not change.
It's my understanding that setting the cpufreq-Governor to Modus "performance" is on purpose, maybe for getting better WAN speed and latency. what seems to be an issue on older devices. There are some older postings about this.
flood404 provided the initial Information to solve the Turbo-Mode behaviour, you can read a summary --> here <--.
TBH, I do not care if the CPU stays at turbo speed. I only brought it up because it has been listed as an issue in the last few builds. Whether if it is on purpose or not I am not going to worry about it. _________________ Custom computer w/ i7-13700T, 16GB DDR5 Ram, X710-T4L, i226 four port, RLTK 8111 four port, RLTK 8127 & dual AQC113 M2 slot card. Currently running on OpenWRT & Adguard Home. Plan to get DDWRT with Adguard running soon.
GL.iNET GL-BE9300 Flint 3 with OpenWRT as an AP
GL.iNET GL-MT6000 Flint 2 with OpenWRT as an AP
GL INET GL-BE3600 Slate 7 Travel Router with OpenWRT as a travel router
2 R7800's (DDWRT Build r60586) Not in use
3 R7000's (DDWRT build r64137) one used as a bridge
WRT54G-TM not in use
