Posted: Sat Aug 10, 2024 7:49 Post subject: New Build - 08/10/2024 - r57834
Welcome to Broadcom r57834 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_57834 std / Linux 4.4.302-rt232-st52 #12113 SMP Sat Aug 10 04:27:00 +07 2024 armv7l
Previous/Reset: r57793 / no
Mode/Status: Gateway / Up and running for 3:19 hours
CPU Temperature: CPU 79.7 °C / WL0 46.5 °C / WL1 0.0 °C (ambient temperature 26.0 °C)
Issues/Errors: no
As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."
The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
But this does not affect the work.
Just relax
1. CPU temperature is not displayed correctly.
CPU temperature readings started changing after one second from 79.1 - 79.7 °C
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 59468
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 60586
Broadcom
Asus RT-AC88U - DD-WRT 60586
Asus RT-AC87U R - DD-WRT 60586
Asus RT-N66U - DD-WRT 60511
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Router/Version: ASUS RT-AC68U rev B1 (AC1900)
File: asus_rt-ac68u-firmware.trx
Kernel: Linux 4.4.302-rt232-st52 #12105 SMP Fri Aug 9 04:10:34 +07 2024 armv7l
Previous/Reset: r56182 / No reset, upgraded via GUI (https)
Mode/Status: AP Mode; 2.4Ghz (20Mhz) and 5Ghz (80Mhz)
CPU/Radio Temps: CPU:79.1, wl0:51.0, wl1: 54.0
Issues/Errors: No issues; Working as configured
Thank you BS and all of the other devs who help out to make this firmware great. _________________ ASUS RT-AC3100 AP Asus 386.48322
ASUS RT-AC68U Media Bridge x2 Asus 386.51733
ASUS RT-AC68U AP FreshTomato 2025.2
ASUS RT-AC68U Gateway/AP r60732
Edgerouter-4, v2.0.9-hotfix7
Joined: 18 Mar 2014 Posts: 13656 Location: Netherlands
Posted: Sun Aug 11, 2024 14:53 Post subject:
Router Model: Linksys EA6900 (XVortex CFE)
Firmware Version: Firmware by egc: DD-WRT v3.0-r57834M Community Build (08/10/24)
Upgraded from: Firmware by egc: DD-WRT v3.0-r57793M Community Build (08/09/24)using patched build so GUI update is working without a problem for this Xvortex CFE upgrade 😃
Reset: No not this time.
Configuration: Default gateway mode, 2,4GHz wireless running with unbridged VAP, 5GHz running, some static leases and some port range forwarding.
Four WireGuard tunnels running, one Server, one site-to-site and two clients in Fail-over group to Mullvad (of course with PBR to allow the WG server to use the WAN).
OpenVPN client with PBR running.
DDNS (dynv6) working.
IPv6 working.
NVRAM size 56K (NVRAM size should not be a problem with the Xvortex CFE)
Status: Up and stable for 8 hours
Errors: none so far
Thanks BS!!
Currently working on IPv6, coming to a build near you IPv6 for available interfaces will set RA for DNSMasq and IPv6 settings for wide-dhcp6 client but no ETA yet
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r57834 std (08/10/24)
Kernel: Linux 4.4.302-rt232-st52 #12109 Sat Aug 10 03:58:03 +07 2024 armv7l
Mode: gateway
Previous: r57595
Reset: no
Status: all ok
Issues/Errors: none observed
Joined: 24 Feb 2013 Posts: 1641 Location: Belgrade
Posted: Mon Aug 12, 2024 18:49 Post subject:
egc wrote:
Currently working on IPv6, coming to a build near you IPv6 for available interfaces will set RA for DNSMasq and IPv6 settings for wide-dhcp6 client but no ETA yet
Great news! But, first step in greater ipv6 integration within DD-WRT should be something @ jamesmtl suggested 9 years ago... we were still young back then Seb too...
Code:
Setup -> IPv6 -> IPv6 dnsmasq section
[x] Enable dnsmasq IPv6
[x] Enable Stateless configuration
[x] Enable stateful configuration (*Required for IPv6 Address Reservations)
IPv6 dhcpv6 range
Start Address [1000 ] to End Address [FFFF ]
[4 ] Default dhcpv6 Client Lease Time (mins)
[300 ] RA lifetime (seconds)
Services -> Static Leases
Mac Address Hostname IP Address IPv4 Lease IPv6 Address IPv6 Lease
[AA:AA:AA:AA:AA:AA] [myserver] [192.168.1.50] [1440 ] mins [400 ] [5 ] mins
Which could be used to create dnsmasq conf entries such as
*** Note I would suggest both ipv4 and ipv6 host entries for each client as people
with dynamic ipv6 addresses need short ipv6 lease times so that clients update quickly
after a prefix change
Statelful and stateless coexist well in an ipv6 deployment
Seb too...