[SOLVED] Netgear R6400V2 slow internet speed with new builds

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
winproof
DD-WRT Novice


Joined: 23 Feb 2018
Posts: 2

PostPosted: Tue Jul 30, 2024 1:42    Post subject: [SOLVED] Netgear R6400V2 slow internet speed with new builds Reply with quote
Hello all!

i have a strange problem.

i use a Netgear R6400V2, with build r39538, work perfectly with vlan tag on WAN (needed for my ISP).

upload/download speed 800Mbps.

but now i need to connect my routeur to wireguard vpn, so i need to upgrade my build.

i've directly upgrade to r57595, no problem, except a capped internet speed?

now i have only 400Mbps... (tested with wired connection)

so, i downgrade to r54682, same problem.

i've try with vlan tag (ONT plugged on r6400) or without (r6400 plugged on isp box), no change.

same with ou without wifi activated, or after nvram erase & reboot.

if I go back to build r39538, problem disappears Shocked

any idea what caused it? Very Happy

Thanks!

Ps: sorry for my english, it's not my native language


Last edited by winproof on Tue Jul 30, 2024 10:40; edited 1 time in total
Sponsor
lexridge
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 1652
Location: WV, USA

PostPosted: Tue Jul 30, 2024 2:37    Post subject: Reply with quote
Have you tried enabling under the Basic Setup page, the Shortcut Forwarding Engine? Try each (SFE and CTF) and see if one works better than the other. I have not had a bdcm router connected to a WAN connection in many years so I don't know which may work best.
_________________
- Linksys EA8500: I-Gateway, WAP/VAP 5ghz only. Features: WDS-AP, VLANs, Samba, WG, Entware - r58662
- Linksys EA8500: 802.11s Secondary w/VLAN Trunk - r58662
- Linksys MX4300: 802.11s Primary w/VLAN Trunk over 5ghz. 2.4ghz WAP/VAP only - r58662
- Linksys MX4300 (WAP/VAP (7)) Multiple VLANs over single trunk port. Entware/Samba r58662
- Linksys MR7350: Testing r58662
- Linksys Velop WHW03v1 x2: OpenWRT w/GRETAP tunnel for VLANs on VAPs
- OSes: Fedora 39, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '95, never having owned a Windows PC.

- Forum member #248
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 13423
Location: Netherlands

PostPosted: Tue Jul 30, 2024 7:24    Post subject: Reply with quote
I have one and you need to enable CTF and then CTF&FA

Reboot and you should get > 900 Mb/s but that only works if your WAN is automatic DHCP
See: https://wiki.dd-wrt.com/wiki/index.php/Hardware
under: Flow Acceleration, SFE and Cut-Through Forwarding

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
winproof
DD-WRT Novice


Joined: 23 Feb 2018
Posts: 2

PostPosted: Tue Jul 30, 2024 10:40    Post subject: Reply with quote
ok it's work, perfect.
Thanks!
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum