flash this through the emergency webinterface and you should be ready to go again.
i really hope the dd-wrt team is supplying us with a version of dd-wrt compatible with the new rev.5 soon as the original firmware (though beeing decent) is not that flexible as dd-wrt is
The RT5350 router-on-a-chip includes an 802.11n media access controller (MAC) and baseband, a 2.4GHz radio and FEM, a 360 MHz MIPS® 24K™ CPU core, and a 5-port 10/100 Ethernet MAC/PHY.
The RT5350 router-on-a-chip includes an 802.11n media access controller (MAC) and baseband, a 2.4GHz radio and FEM, a 360 MHz MIPS® 24K™ CPU core, and a 5-port 10/100 Ethernet MAC/PHY.
Does this mean that DD-WRT cannot be used on this router?
Almost same situation here. My DIR-600 B2 died and I have got it changed with a brand new B5. I hope that the DD-WRT gurus here will figure it out soon.
Posted: Tue Aug 02, 2011 16:08 Post subject: Same issue here
Hello,
I have the same issue with my DIR-600 with FW 2.10:
I am trying to flash dd-wrt for dir-600 (following the steps indicated at http://www.dd-wrt.com/wiki/index.php/D-Link_DIR-600_/_300vB) and I get the message "Invalid image file.(...)".
My final goal is to setup the DIR-600 as a repeater and I didn't find any other way but using dd-wrt firmware.