USB3 fail after 53633

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Author Message
Giuliano1969
DD-WRT Novice


Joined: 16 Oct 2009
Posts: 48

PostPosted: Fri Jun 28, 2024 22:48    Post subject: USB3 fail after 53633 Reply with quote
Hi.

Im using usingDD-WRT v3.0-r50176 std (09/15/22) on a R7800

I was checking the last fw version, and found the AFTER 53633 the usb3 is port is NOT working/recognized.

-Does the usb port fail with every router or just with some model ?
-Is it a explicit will or an unwanted bug (=why older version works) ?
-Which is the last version to flash, if someone is using a usb key with jffs ?

BR
Giuliano

_________________
Netgear R7800
Sponsor
dpp3530
DD-WRT Guru


Joined: 12 Dec 2007
Posts: 892
Location: Pittsburgh, PA USA

PostPosted: Sat Jun 29, 2024 0:37    Post subject: Reply with quote
My guess would be all routers.

I'm seeing the same behavior on both an R7800 and on a Linksys WRT1900AC v1 (Marvell chipset). In both cases the USB2 port is non-functional and USB1 only works if it's a USB 2.0 drive. I ended up buying a cheap 5 pack of USB 2.0 64GB thumbdrives. All drives are formatted as ext2 using Ubuntu.

Haven't tried it but maybe putting a USB 2.0 hub between a USB 3.0 device and the port would work.

_________________
__________________________
Linksys MR7350
DD-WRT v3.0 STD
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 15244
Location: Texas, USA

PostPosted: Sat Jun 29, 2024 0:55    Post subject: Reply with quote
Please provide exact steps to reproduce and logs. One port on my WRT3200ACM powers the cooling fans and the other port is saving logs to USB flash drive among other things on 56820. My R7800 uses USB flash drive for unbound configs and other things and is configured for Android Tethering on same build.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
dpp3530
DD-WRT Guru


Joined: 12 Dec 2007
Posts: 892
Location: Pittsburgh, PA USA

PostPosted: Sat Jun 29, 2024 3:16    Post subject: Reply with quote
Drives
1. 16GB SANDisk USB 3.0 drive.
2. 64GB generic USB 2.0 drive.

Both formatted using the Linux Command Line instructions in the following article: https://wiki.dd-wrt.com/wiki/index.php/How_to_-_Format_and_Partition_External_Storage_Device. Have tried formatting using both ext2 and ext4. No difference in the results. In either case, the Disk Info status shows ext4. Brainslayer previously mentioned that this is cosmetic only.

Screenshot of the USB tab settings below. Only difference between the two drives is the UUIDs, which I set correctly for each drive. Reboot after settings change.

Scenarios
1. Drive 1 inserted into USB2 port. Updated UUIDs and rebooted. Disk Info on the USB page shows no drive information. It's like the drive is not plugged in.
2. Drive 1 inserted into USB1 port. Updated UUIDs and rebooted. Disk Info on the USB page shows partitions mounted, but "cd /jffs" followed by "ls" shows only the Lost+Found folder. Similar results for /opt. Can't create a folder, can't copy files to the partition. No previously installed Entware programs are accessible.
3. Drive 2 inserted into USB2 port. Updated UUIDs and rebooted. Disk Info on the USB page shows no drive information. It's like the drive is not plugged in.
4. Drive 2 inserted into USB1 port. Updated UUIDs and rebooted. Disk Info on the USB page shows partitions mounted, and all files and subfolders are visible in the /jffs and /opt folders. Works as expected.

_________________
__________________________
Linksys MR7350
DD-WRT v3.0 STD
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6968
Location: Romerike, Norway

PostPosted: Sat Jun 29, 2024 7:42    Post subject: Reply with quote
Have two disks connected. Both are working.
Be aware that the port on the right side of the router is a SATA Port.
Giuliano1969
DD-WRT Novice


Joined: 16 Oct 2009
Posts: 48

PostPosted: Sat Jun 29, 2024 19:43    Post subject: Reply with quote
Per Yngve Berg wrote:
Have two disks connected. Both are working.
Be aware that the port on the right side of the router is a SATA Port.


Seems that the problem could be limited to the dpp3530 router (HW bug) ?

BTW,
considering I'm using v3.0-r50176 , which version would you suggest me to install:
the newest or some specific "stable" version ?


BR
Giuliano

_________________
Netgear R7800
dpp3530
DD-WRT Guru


Joined: 12 Dec 2007
Posts: 892
Location: Pittsburgh, PA USA

PostPosted: Sat Jun 29, 2024 19:49    Post subject: Reply with quote
I find it unlikely 4 different routers (2 R7800s and 2 WRT1900ACs) could have the same hardware issue. In any case, USB 2.0 works for my purposes.
_________________
__________________________
Linksys MR7350
DD-WRT v3.0 STD
Giuliano1969
DD-WRT Novice


Joined: 16 Oct 2009
Posts: 48

PostPosted: Sat Jun 29, 2024 22:09    Post subject: Reply with quote
Per Yngve Berg wrote:
Have two disks connected. Both are working.
Be aware that the port on the right side of the router is a SATA Port.


re-Reading dpp3530 report, seems the problem happens with USB3 device type , _not_ wit USB2 device type (that seems to work for him).

Are your disks usb2 or usb3 type ?

BR
Giuliano

_________________
Netgear R7800
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum