DD-WRT :: View topic - New Build - 05/20/2026

New Build - 05/20/2026 - r65079

DD-WRT Forum Index -> Qualcomm Atheros based Hardware

Goto page 1, 2 Next

View previous topic :: View next topic

Author

Message

blkt
DD-WRT Guru

Joined: 20 Jan 2019
Posts: 6485

Posted: Thu May 21, 2026 4:05 Post subject: New Build - 05/20/2026 - r65079

Welcome to Atheros r65079 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r65002 (mirror)

• OpenVPN 2.6.17: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r64210 r64453 r64533 r64600 r64764 r64954 r65002 r65079
• r60771-r65079 migrates IPQ806x from swconfig to DSA however VLAN configurations will not; no more Switch Config tab.
• IPQ806x: Asrock G10, Linksys EA8500, Netgear R7500, R7500v2, R7800, XR500 (XR450) & Trendnet TEW-827DRU v1.0R.

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

Code:

[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

Sponsor

BrainSlayer
Site Admin

Joined: 06 Jun 2006
Posts: 7819
Location: Dresden, Germany

Posted: Thu May 21, 2026 4:35 Post subject: Re: New Build - 05/20/2026 - r65079

blkt wrote:

Code:

[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

regarding: migrates IPQ806x from swconfig to DSA however VLAN configurations will not; no more Switch Config tab.

you simply dont need it anymore. you configure vlans per interface on the networking page. no extra switch configuration neccessary anymore. so this comment is simply telling that vlans will not work anymore. thats more than just a false claim
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s

Per Yngve Berg
DD-WRT Guru

Joined: 13 Aug 2013
Posts: 7159
Location: Romerike, Norway

Posted: Thu May 21, 2026 4:41 Post subject:
That note says you have to reconfigure when switching from swconfig to DSA.

blkt
DD-WRT Guru

Joined: 20 Jan 2019
Posts: 6485

Posted: Thu May 21, 2026 5:40 Post subject:

BrainSlayer wrote:

I added this 390 days ago due to a valid concern from lexridge, who asked to add a disclaimer regarding this major change.
Maybe I should have further spelled it out for everybody regarding vlan config, but there were other threads explaining this.

Not sure what is going on here. I have largely taken a back seat after NSS broken reports have been ignored, until recently.
Possibility to revert to swconfig is welcome, allowing NSS acceleration! BTW, a properly configured NSS fq_codel is amazing.
When ISP overhead and NSS are correctly factored into calculations for queue limits, quantum, and MPU, it is night and day.

Per Yngve Berg wrote:

That note says you have to reconfigure when switching from swconfig to DSA.

Thank you, exactly, to prevent those with vlan configs from blindly upgrading before learning the new configuration process.

BrainSlayer
Site Admin

Joined: 06 Jun 2006
Posts: 7819
Location: Dresden, Germany

Posted: Thu May 21, 2026 6:47 Post subject:

Per Yngve Berg wrote:

That note says you have to reconfigure when switching from swconfig to DSA.

thats true
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s

BrainSlayer
Site Admin

Joined: 06 Jun 2006
Posts: 7819
Location: Dresden, Germany

Posted: Thu May 21, 2026 6:49 Post subject:

blkt wrote:

BrainSlayer wrote:

Per Yngve Berg wrote:

That note says you have to reconfigure when switching from swconfig to DSA.

Thank you, exactly, to prevent those with vlan configs from blindly upgrading before learning the new configuration process.

i wont ignore them and its also not broken. i have just to think about it and how to handle it with dsa. in worst case i have to modify the nss firmware but this isnt a big deal since i have the firmware sourcecodes. just need a working toolchain for ubicom 8k

and one thing . i have a r7800 here with nss enabled. but it works in bridge mode but it is working. so it cannot be entirely broken
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s

blkt
DD-WRT Guru

Joined: 20 Jan 2019
Posts: 6485

Posted: Thu May 21, 2026 7:17 Post subject:

BrainSlayer wrote:

A perfect Schrödinger's response, this is great news! I thought we were bound to limitations of another black box situation.

Be Inspired
DD-WRT User

Joined: 20 Nov 2019
Posts: 98

Posted: Thu May 21, 2026 7:18 Post subject:
Hello to all, Upgraded both of my devices to this build from r65002 without reset and all i use are working fine. Thank you very much BS and devs. _________________ TP-LINK Archer C7 v5 Wireless Access Point TP-LINK TL-WR1043ND v2 Wireless Access Point

Alozaros
DD-WRT Guru

Joined: 16 Nov 2015
Posts: 7248
Location: UK, London, just across the river..

Posted: Thu May 21, 2026 10:02 Post subject:

Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r65079 std (05/20/26)
Kernel Version Linux 6.1.173-rt28 #924 SMP Wed May 20 08:58:45 +07 2026 armv7l

Update: CLI
Reset: NO
Status: Operational (running services/mode from my signature)
Errors: ----> haven't tested ipset/dnsmasq long string, nor if SmartDNS quic is working...will do that later and report again...so, far with set up from my sig router is working...
_________________
Atheros
TP-Link WR1043NDv2 -DD-WRT 65291 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 -OpenWRT Kong 25.12
Netgear XR500 -DD-WRT 65291 GTW/SmDNS-Quic,AD-Blk,Forced DNS,AP&Net Isolation,x2VLAN,Vanilla
Netgear R7800 --DD-WRT r65291 Gateway/DNSCryptv2,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,IPset Firewall,Vanilla,VPN cli
Netgear R9000 --DD-WRT 65291 Gateway/SmDNS-Quic,AD-Block,AP Isolation,Firewall,Forced DNS,Vanilla
Dynalink DL-WRX36-DDWRT 65291
Broadcom
Netgear R7000 --DD-WRT 65291 GTW/DNScrypt-proxy2/AD-Block,IPset Firewall,Forced DNS,x4VLAN,VPN cli
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913

Jovan
DD-WRT User

Joined: 06 Nov 2018
Posts: 174

Posted: Thu May 21, 2026 12:03 Post subject:

Router Model: TP-Link TL-WR841ND v11
Firmware Version: DD-WRT v3.0-r65079 std (05/20/26)
Kernel Version: Linux 3.18.140-d6 #266428 Wed May 20 12:26:51 +06 2026 mips
Previous: r65002, update via WinSCP + CLI
Reset: Yes
Status: Working OK as AP, N-Only, HT20
Issues: None

I hope it's not placebo but I think the QoS latency on Upload side had a dramatic drop. I know that my bufferbloat tests vary a lot depending on the noise in wifi neighborhood but this change I think is beyond being a "lucky day". I was used to get in general 600-700 ms latency on Upload. A couple of firmwares ago dropped to 300-400 ms range. Now I see something in 20-50 ms range, which is very close to Download side latency (20-25 ms). I don't think that all my neighbours moved out suddenly, I think something has significantly changed for the better with the firmware.

Thanks a lot BS!!!
_________________
Router:TP-Link TL-WR841ND v11

MLandi
DD-WRT Guru

Joined: 04 Dec 2007
Posts: 1298
Location: Murrysville, PA

Posted: Thu May 21, 2026 13:07 Post subject:

Update method: SSH / CLI using PuTTY
Router/Version: Linksys MX8500
File/Kernel: DD-WRT v3.0-r65079 std (05/20/26) / Linux 6.12.90 #549 SMP Wed May 20 14:26:43 +06 2026 aarch64; No Reset
Previous/Reset: DD-WRT v3.0-r65002 std (05/15/26) / Linux 6.12.88 #489 SMP Fri May 15 16:41:21 +06 2026 aarch64; No Reset
Mode/Status: Primary Gateway / In Service
Issues/Errors: Very minor, the CLI "NVRAM BACKUP" shows an error even though it works properly. No other Issues.
_________________
Linksys MX8500
DD-WRT v3.0-r65140 std (05/24/26)
Linux 6.12.90 #560 SMP Sun May 24 04:26:15 +06 2026 aarch64
Gateway, AP, DNSMasq, no ARPd caching, SmartDNS, quic, NSS-ECM, QCA NSS, no STP, IPv4 & IPv6
VAP on wlan1 for internet devices
Static Leases & DHCP
Quad9, Forced DNS, Forced DoT, No QoS
2.4GHz: AP, AX Only, ACK Timing 300, WPA2 & WPA3 w/AES & GCMP
5GHz: AP, AX Only, ACK Timing 300, WPA3 w/GCMP
Netgear AX1800 WiFi Mesh Extender (x2)
Xfinity 1.2Gbps/40Mbps

KACTET
DD-WRT Guru

Joined: 01 May 2022
Posts: 801

Posted: Thu May 21, 2026 13:41 Post subject: WR841ND

Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin_r65079 / Linux 3.18.140-d6 #266428 Wed May 20 12:26:51 +06 2026 mips
Previous/Reset: r65002 / no
Mode/Status: AP wired and wireless / Up and running for 4:10
Issues/Errors: Nothing significant

If your router's light turns red, don't worry. Internet connection is ok.
Incorrect rate of wlan0 - 800 Mbit/s!

Thank you BS and gurus!
_________________
Atheros
Netgear XR500 Nighthawk - DD-WRT 63257
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 64954
Broadcom
Asus RT-AC88U - DD-WRT 64954
Asus RT-AC87U R - DD-WRT 64954
Asus RT-N66U - DD-WRT 64954
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2

Alozaros
DD-WRT Guru

Joined: 16 Nov 2015
Posts: 7248
Location: UK, London, just across the river..

Posted: Thu May 21, 2026 15:02 Post subject:

SmartDNS doesn't want to use quic...no idea if it is related with upstream issue or local..to me, it seems like local, as every time, i try it, it throws that big red error...

Code:

└─cat /tmp/smartdns/smartdns.conf
bind :6053
serve-expired yes
log-size 32K
log-num 1
log-level warn
cache-size 3000
log-file /tmp/smartdns.log
ca-file /etc/ssl/certs/ca-certificates.crt
ca-path /etc/ssl/certs/
server-quic 9.9.9.9

also tried with server-quic 9.9.9.9:853 -host-name dns.quad9.net -tls-host-verify dns.quad9.net -host-ip 9.9.9.9 same big red error

syslog

May 21 11:45:41.394 R7800and user.info : [smartdns] : successfully started
May 21 11:45:41.398 R7800and user.err : Caught SIGSEGV (11) at 0x00000000
May 21 11:45:41.398 R7800and user.err : Fault at memory location 0x00000000 due to address not mapped to object (1).
May 21 11:45:41.398 R7800and user.err : Thread 25689: smartdns
May 21 11:45:41.399 R7800and user.err : maps:
May 21 11:45:41.399 R7800and user.err : 00010000-00063000 r-xp 00000000 1f:06 2061 /usr/sbin/smartdns
May 21 11:45:41.399 R7800and user.err : 00063000-00064000 r--p 00052000 1f:06 2061 /usr/sbin/smartdns
May 21 11:45:41.399 R7800and user.err : 00064000-00066000 rw-p 00053000 1f:06 2061 /usr/sbin/smartdns
May 21 11:45:41.399 R7800and user.err : 00066000-0011f000 rw-p 00000000 00:00 0
May 21 11:45:41.399 R7800and user.err : 014c9000-014ca000 ---p 00000000 00:00 0 [heap]
May 21 11:45:41.399 R7800and user.err : 014ca000-014cb000 rw-p 00000000 00:00 0 [heap]
May 21 11:45:41.399 R7800and user.err : 014cb000-014d0000 rw-p 00000000 00:00 0 [heap]
May 21 11:45:41.399 R7800and user.err : b68d7000-b6a3c000 rw-p 00000000 00:00 0
May 21 11:45:41.399 R7800and user.err : b6a3c000-b6a3e000 ---p 00000000 00:00 0
May 21 11:45:41.399 R7800and user.err : b6a3e000-b6a64000 rw-p 00000000 00:00 0
May 21 11:45:41.399 R7800and user.err : b6a64000-b6a66000 ---p 00000000 00:00 0
May 21 11:45:41.399 R7800and user.err : b6a66000-b6a87000 rw-p 00000000 00:00 0
May 21 11:45:41.399 R7800and user.err : b6a87000-b6a89000 ---p 00000000 00:00 0
May 21 11:45:41.399 R7800and user.err : b6a89000-b6ab3000 rw-p 00000000 00:00 0
May 21 11:45:41.400 R7800and user.err : b6ab3000-b6ac1000 r-xp 00000000 1f:06 1820 /usr/lib/ossl-modules/legacy.so
May 21 11:45:41.400 R7800and user.err : b6ac1000-b6ac3000 r--p 0000e000 1f:06 1820 /usr/lib/ossl-modules/legacy.so
May 21 11:45:41.400 R7800and user.err : b6ac3000-b6ac4000 rw-p 00010000 1f:06 1820 /usr/lib/ossl-modules/legacy.so
May 21 11:45:41.400 R7800and user.err : b6ac4000-b6ad5000 rw-p 00000000 00:00 0
May 21 11:45:41.400 R7800and user.err : b6ad5000-b6ad7000 ---p 00000000 00:00 0
May 21 11:45:41.400 R7800and user.err : b6ad7000-b6b00000 rw-p 00000000 00:00 0
May 21 11:45:41.400 R7800and user.err : b6b00000-b6b07000 rw-p 00000000 00:00 0
May 21 11:45:41.400 R7800and user.err : b6b07000-b6b08000 rw-p 00000000 00:00 0
May 21 11:45:41.400 R7800and user.err : b6b08000-b6b0b000 r-xp 00000000 1f:06 1018 /lib/libatomic.so.1
May 21 11:45:41.400 R7800and user.err : b6b0b000-b6b0c000 r--p 00002000 1f:06 1018 /lib/libatomic.so.1
May 21 11:45:41.400 R7800and user.err : b6b0c000-b6b0d000 rw-p 00003000 1f:06 1018 /lib/libatomic.so.1
May 21 11:45:41.400 R7800and user.err : b6b0d000-b6b0e000 rw-p 00000000 00:00 0
May 21 11:45:41.400 R7800and user.err : b6b0e000-b6b19000 r-xp 00000000 1f:06 1029 /lib/libgcc_s.so.1
May 21 11:45:41.400 R7800and user.err : b6b19000-b6b1a000 r--p 0000a000 1f:06 1029 /lib/libgcc_s.so.1
May 21 11:45:41.400 R7800and user.err : b6b1a000-b6b1b000 rw-p 0000b000 1f:06 1029 /lib/libgcc_s.so.1
May 21 11:45:41.400 R7800and user.err : b6b1b000-b6dd1000 r-xp 00000000 1f:06 1629 /usr/lib/libcrypto.so.3
May 21 11:45:41.401 R7800and user.err : b6dd1000-b6e03000 r--p 002b6000 1f:06 1629 /usr/lib/libcrypto.so.3
May 21 11:45:41.401 R7800and user.err : b6e03000-b6e05000 rw-p 002e8000 1f:06 1629 /usr/lib/libcrypto.so.3
May 21 11:45:41.401 R7800and user.err : b6e05000-b6e07000 rw-p 00000000 00:00 0
May 21 11:45:41.401 R7800and user.err : b6e07000-b6ea8000 r-xp 00000000 1f:06 1750 /usr/lib/libssl.so.3
May 21 11:45:41.401 R7800and user.err : b6ea8000-b6eae000 r--p 000a0000 1f:06 1750 /usr/lib/libssl.so.3
May 21 11:45:41.401 R7800and user.err : b6eae000-b6eb2000 rw-p 000a6000 1f:06 1750 /usr/lib/libssl.so.3
May 21 11:45:41.401 R7800and user.err : b6eb2000-b6eb7000 r-xp 00000000 1f:06 1033 /lib/libnvram.so
May 21 11:45:41.401 R7800and user.err : b6eb7000-b6eb8000 r--p 00005000 1f:06 1033 /lib/libnvram.so
May 21 11:45:41.401 R7800and user.err : b6eb8000-b6eb9000 rw-p 00006000 1f:06 1033 /lib/libnvram.so
May 21 11:45:41.401 R7800and user.err : b6eb9000-b6ec9000 r-xp 00000000 1f:06 1746 /usr/lib/libshutils.so
May 21 11:45:41.401 R7800and user.err : b6ec9000-b6eca000 r--p 00010000 1f:06 1746 /usr/lib/libshutils.so
May 21 11:45:41.401 R7800and user.err : b6eca000-b6ecc000 rw-p 00011000 1f:06 1746 /usr/lib/libshutils.so
May 21 11:45:41.401 R7800and user.err : b6ecc000-b6f3a000 r-xp 00000000 1f:06 1019 /lib/libc.so
May 21 11:45:41.401 R7800and user.err : b6f3a000-b6f3b000 r--p 0006d000 1f:06 1019 /lib/libc.so
May 21 11:45:41.401 R7800and user.err : b6f3b000-b6f3c000 rw-p 0006e000 1f:06 1019 /lib/libc.so
May 21 11:45:41.401 R7800and user.err : b6f3c000-b6f3e000 rw-p 00000000 00:00 0
May 21 11:45:41.402 R7800and user.err : bec30000-bec51000 rw-p 00000000 00:00 0 [stack]
May 21 11:45:41.402 R7800and user.err : bef77000-bef78000 r-xp 00000000 00:00 0 [sigpage]
May 21 11:45:41.402 R7800and user.err : bef78000-bef79000 r--p 00000000 00:00 0 [vvar]
May 21 11:45:41.402 R7800and user.err : bef79000-bef7a000 r-xp 00000000 00:00 0 [vdso]
May 21 11:45:41.402 R7800and user.err : ffff0000-ffff1000 r-xp 00000000 00:00 0 [vectors]
May 21 11:45:41.402 R7800and user.err : === Context:
May 21 11:45:41.402 R7800and user.err : TRAPNO:0000000e ERRCODE:80000007 OLDMASK:00000000 R0:b691e840
May 21 11:45:41.402 R7800and user.err : R1:b691e860 R2:b69f8a90 R3:00000010 R4:b691e800
May 21 11:45:41.402 R7800and user.err : R5:00000006 R6:b69f8aa0 R7:00000010 R8:00000000
May 21 11:45:41.402 R7800and user.err : R9:b6dfff34 R10:b6a5d668 FP:00000002 IP:00000016
May 21 11:45:41.402 R7800and user.err : SP:b6a5d570 LR:b6c84914 PC:00000000 CPSR:200b0010
May 21 11:45:41.402 R7800and user.err : FAULTADDR:00000000
May 21 11:45:41.402 R7800and user.err : === Backtrace:
May 21 11:45:41.403 R7800and user.err : # Called through bad function pointer 0 (LR = 0xb6c84914); assuming PC <- LR.
May 21 11:45:41.403 R7800and user.err : # Searching frame 0 (FP=0x00000002, PC=0xb6c84914)
May 21 11:45:41.412 R7800and user.err : # PC-214[0xb6c84700]: 0xe92d4ff0 stmfd sp!
May 21 11:45:41.416 R7800and user.err : # Stack at 0x00000002 is not mapped; terminating backtrace.
May 21 11:45:41.416 R7800and user.err : /usr/lib/libcrypto.so.3[0xb6b1b000](CRYPTO_gcm128_aad+0x00000080)[0xb6c84914]
May 21 11:45:41.417 R7800and user.err : === Code:
May 21 11:45:41.417 R7800and user.err : b6c848d4: e5803030 e5903170 e1a04000 e5802034 e3530000 1a000017 e3d5700f 0a000007
May 21 11:45:41.418 R7800and user.err : b6c848f4: e5948164 e1a02006 e1a03007 e2841060 e2840040 e0866007 e0455007 e12fff38
May 21 11:45:41.418 R7800and user.err : b6c84914: >e3550000 1a000015 e1a03005 e3a00000 e5843170 e8bd81f0 e0841003 e4d60001
May 21 11:45:41.418 R7800and user.err : b6c84934: e2833001 e5d12040 e2455001 e203300f e0222000 e5c12040 e3530000 13550000

even tried it after full reset...h3 or quic, all the same big red user err...tls and https both work...ok
_________________
Atheros
TP-Link WR1043NDv2 -DD-WRT 65291 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 -OpenWRT Kong 25.12
Netgear XR500 -DD-WRT 65291 GTW/SmDNS-Quic,AD-Blk,Forced DNS,AP&Net Isolation,x2VLAN,Vanilla
Netgear R7800 --DD-WRT r65291 Gateway/DNSCryptv2,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,IPset Firewall,Vanilla,VPN cli
Netgear R9000 --DD-WRT 65291 Gateway/SmDNS-Quic,AD-Block,AP Isolation,Firewall,Forced DNS,Vanilla
Dynalink DL-WRX36-DDWRT 65291
Broadcom
Netgear R7000 --DD-WRT 65291 GTW/DNScrypt-proxy2/AD-Block,IPset Firewall,Forced DNS,x4VLAN,VPN cli
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913

BrainSlayer
Site Admin

Joined: 06 Jun 2006
Posts: 7819
Location: Dresden, Germany

Posted: Thu May 21, 2026 17:40 Post subject:

Alozaros wrote:

SmartDNS doesn't want to use quic...no idea if it is related with upstream issue or local..to me, it seems like local, as every time, i try it, it throws that big red error...

Code:

can ypu submit this to upstream on github? it can be also a format issue with your crt file since its crahshed in openssl
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s

Alozaros
DD-WRT Guru

Joined: 16 Nov 2015
Posts: 7248
Location: UK, London, just across the river..

Posted: Thu May 21, 2026 19:40 Post subject:

BrainSlayer wrote:

can ypu submit this to upstream on github? it can be also a format issue with your crt file since its crahshed in openssl

well.. i will do so...bare in mind nothing wrong with my certificate file /crt its the one that comes along after reset, the default one for DDWRT... as i tested it after full reset and bare config...with same results...
if i use tls or https it works...only quic and doh3 are crashing ...
will contact the chap and will let you know....

quic is working on the older build 62606..but yep SmartDNS have had some updates ever since... Cool

_________________
Atheros
TP-Link WR1043NDv2 -DD-WRT 65291 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 -OpenWRT Kong 25.12
Netgear XR500 -DD-WRT 65291 GTW/SmDNS-Quic,AD-Blk,Forced DNS,AP&Net Isolation,x2VLAN,Vanilla
Netgear R7800 --DD-WRT r65291 Gateway/DNSCryptv2,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,IPset Firewall,Vanilla,VPN cli
Netgear R9000 --DD-WRT 65291 Gateway/SmDNS-Quic,AD-Block,AP Isolation,Firewall,Forced DNS,Vanilla
Dynalink DL-WRX36-DDWRT 65291
Broadcom
Netgear R7000 --DD-WRT 65291 GTW/DNScrypt-proxy2/AD-Block,IPset Firewall,Forced DNS,x4VLAN,VPN cli
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913

Goto page 1, 2 Next

Display posts from previous:

Page 1 of 2

DD-WRT Forum Index -> Qualcomm Atheros based Hardware

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Log in

New Build - 05/20/2026 - r65079

Quick Links

Log in