New Build - 03/19/2024 - r55416

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5770

PostPosted: Tue Mar 19, 2024 15:05    Post subject: New Build - 03/19/2024 - r55416 Reply with quote
Welcome to Broadcom r55416 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.


CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 55363 (mirror)

OpenVPN 2.6.8: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
r54203 r54248 r54420 r54475 r54517 r54545 r54569 r54604 r54637 r54652 r54682 r54905 r54914 r55003 r55009 r55033
r55052 r55109 r55179 r55209 r55262 r55303 r55363 r55416

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
KACTET
DD-WRT User


Joined: 01 May 2022
Posts: 282

PostPosted: Tue Mar 19, 2024 17:58    Post subject: Reply with quote
Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r55416 std / Linux 4.4.302-st49 #11241 SMP Tue Mar 19 05:06:37 +06 2024 armv7l
Previous/Reset: r55363 / no
Mode/Status: Gateway / Up and running for 3:17 hours
CPU Temperature: CPU 63.6 °C / WL0 40.5 °C / WL1 0.0 °C (ambient temperature 17.0 °C)
Issues/Errors: Nothing significant

As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel. Crying or Very sad
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot." Wink

The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
But this does not affect the work.
Just relax
Cool

CPU temperature is not displayed correctly.
CPU temperature readings started changing after one second from 63.6 - 64.1 °C

Thank you BS and gurus!

_________________
Atheros
Netgear XR500 Nighthawk - DD-WRT 56409
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 56667
Broadcom
Asus RT-AC87U R - DD-WRT 56667
Asus RT-N66U - DD-WRT 56667
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 1002

PostPosted: Wed Mar 20, 2024 3:19    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r55416) / Linux 4.4.302-st49 #11233 SMP Mon Mar 18 11:41:40 +06 2024 armv7l
Previous/Reset: DD-WRT v3.0-r55363 std (03/13/24) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + SSH (public key) + DDNS (Dynu.com) + high-speed USB Storage (guide by egc) + WireGuard server + Cron / working
Issues/Errors: none



dmesg_messages_Dlink-DIR868L-RB_r55416_2024-03-19_21-33-37.tgz
 Description:

Download
 Filename:  dmesg_messages_Dlink-DIR868L-RB_r55416_2024-03-19_21-33-37.tgz
 Filesize:  19.42 KB
 Downloaded:  75 Time(s)


_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6501
Location: UK, London, just across the river..

PostPosted: Wed Mar 20, 2024 10:21    Post subject: Reply with quote
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r55416 std (03/19/24)
Kernel Version Linux 4.4.302-st49 #11233 SMP Mon Mar 18 11:41:40 +06 2024 armv7l

update: CLI r55363 > r55416
reset: NO
mode: Gateway/DoH via SmartDNS, AD-Block(via script),Firewall(IPset rules),Forced DNS,AP&Net Isolation,x3VLAN's,VPN client(PBR),40 HT 2.4Ghz only
status: Operational 24h+
errors: Nothing new, yet...Thanks BS and Team !

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 56490 WAP
TP-Link WR1043NDv2 -DD-WRT 56490 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 56490 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 56820 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 56490 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Harb1
DD-WRT Novice


Joined: 13 Nov 2023
Posts: 34

PostPosted: Wed Mar 20, 2024 23:20    Post subject: New Build - 03/19/2024 - r55416 Reply with quote
Netgear r7000 Up and running for almost 6hrs seems like a good build but the upload on ethernet is a little less than normal thanks devs.
Sunslide
DD-WRT Novice


Joined: 10 Mar 2024
Posts: 7

PostPosted: Thu Mar 21, 2024 0:41    Post subject: Reply with quote
Router Model: Linksys EA6300v1/EA6400v1
Firmware Version: DD-WRT v3.0-r55416 std (03/19/24)
Kernel Version: Linux 4.4.302-st49 #11233 SMP Mon Mar 18 11:41:40 +06 2024 armv7l
Current Time: Wed, 20 Mar 2024 19:19:08
Uptime: 19:36
Mode: Gateway
File:linksys-ea6400-webflash.bin (03-19-2024-r55416)
Previous/Reset: r55363 / yes but only reset to start fresh.

System Details
CPU Model: Broadcom BCM4708
CPU Clock: 800 MHz
CPU Temp: 48.0 °C (Fan Mod)
Ram Used: 58824 KiB / 123472 KiB


Issues: I am only using this as a gateway and am 100% new to ddwrt and the router scene. There may be underlying issues I don't know of and I don't feel I have it installed 100% correct but it's working good.

Web flash doesn't work through gui.
using mtd commands doesn't seem to flash the partitions. It seemed to worked on the much older (2017) build but seems to have lost function. Posibly user error.

Thanks to everyone who makes this happen!
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14364
Location: Texas, USA

PostPosted: Thu Mar 21, 2024 0:45    Post subject: Reply with quote
Because you are using the WRONG FILE. EA6300 with FCCID containing EA6400 is to use the EA6300 firmware images. The other EA6300 uses the EA6350 images. This is well-documented.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
lexridge
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 1185
Location: WV, USA

PostPosted: Thu Mar 21, 2024 3:21    Post subject: Reply with quote
I would like to install this release on my recently acquired Netgear R6400v2, but to be honest, I have not seen anyone with this router reply to any new build threads in quite a while. It could be a crap shoot, considering the issues with the EA8500 (I know very well the differences between Atheros and Broadcom). I also am aware this is not running a k6.1 build, but nonetheless, a bit worrisome as builds of late have been a bit chaotic, to say the least (especially on Atheros). It is presently running r53562 quite well and is only used as a 2.4ghz VAP for three vlans (well four, if you count vlan1). While de-bricking a R6400v2 is pretty straight forward, I just don't want to have to do it and have half of my Home Automation go down while repairing it. I can always turn 2.4G back on, on my EA8500 but I'd rather not because it's shitty.

So, has anyone installed any recent builds on the R6400v2?

_________________
- Linksys EA8500 (Internet Gateway, AP/VAP 5ghz only) - DD-WRT r56490
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
- Linksys EA8500 WDS Station x2 - DD-WRT r56490
- Netgear R6400v2 WAP/VAP 2.4ghz only w/VLANs over single trunk port. DD-WRT r56490
- Netgear R7800 (WDS-AP, WAP/VAP) - DD-WRT r56490: Features in use: multiple VLANs over single trunk port
- Linksys MR7350 (Coming Soon)
- OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.

- Forum member #248
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 13036
Location: Netherlands

PostPosted: Thu Mar 21, 2024 6:52    Post subject: Reply with quote
R6400v2 is a Broadcom Northstar router just like many others (R7000, R6400, R6300, Asus AC68, Dlink, Buffalo, see: https://gitlab.com/egc112/ddwrt-community-build-clone/-/wikis/How-to-setup-a-Build-Machine/Northstar-Router-Matrix )

If one works you can be pretty sure that all work

As there is already a post from a R7000, you can be pretty sure it will work for your R6400v2.

Besides these will stay on K4.4. which is fine as it is still supported as SLTS release, so I would not be afraid of bricking.

That said maybe wait till the next build, 55424 might be coming today (or not) with some DNSMasq patches

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
lexridge
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 1185
Location: WV, USA

PostPosted: Thu Mar 21, 2024 16:48    Post subject: Reply with quote
Thanks @egc Great news. I will wait for the next build then try it out.

Also, I am very interested in your build project you posted but the wikis link is not working. I did get as far as the DDWRT Community Build. Would love to try building my own for this R6400v2. I already have the DDWRT v4.4 kernel source as I once was building kmodules for a R6250 I once had. I also have the full router source as I tried many times unsuccessfully to build for the EA8500. The kernel builds fine (both 4.9 and 6.1), but that's about as far as I have gotten with it (with the exception of kmodules).

_________________
- Linksys EA8500 (Internet Gateway, AP/VAP 5ghz only) - DD-WRT r56490
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
- Linksys EA8500 WDS Station x2 - DD-WRT r56490
- Netgear R6400v2 WAP/VAP 2.4ghz only w/VLANs over single trunk port. DD-WRT r56490
- Netgear R7800 (WDS-AP, WAP/VAP) - DD-WRT r56490: Features in use: multiple VLANs over single trunk port
- Linksys MR7350 (Coming Soon)
- OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.

- Forum member #248
Cows
DD-WRT Novice


Joined: 06 Dec 2015
Posts: 36

PostPosted: Thu Mar 21, 2024 20:48    Post subject: Reply with quote
lexridge wrote:
I would like to install this release on my recently acquired Netgear R6400v2, but to be honest, I have not seen anyone with this router reply to any new build threads in quite a while. It could be a crap shoot, considering the issues with the EA8500 (I know very well the differences between Atheros and Broadcom). I also am aware this is not running a k6.1 build, but nonetheless, a bit worrisome as builds of late have been a bit chaotic, to say the least (especially on Atheros). It is presently running r53562 quite well and is only used as a 2.4ghz VAP for three vlans (well four, if you count vlan1). While de-bricking a R6400v2 is pretty straight forward, I just don't want to have to do it and have half of my Home Automation go down while repairing it. I can always turn 2.4G back on, on my EA8500 but I'd rather not because it's shitty.

So, has anyone installed any recent builds on the R6400v2?


I installed this last night on my R6400 v2 and it seems fine. I have the R6400v2 that uses the r6400v2otp file.

Router/Version: Netgear R6400 v2
File/Kernel: netgear-r6400v2otp-webflash.bin
Previous/Reset: R55262 (I think) No reset
Mode/Status: Using it as my main router with 2.4 and 5ghz enabled. Everything seems fine
Issues/Errors: A while back I mentioned getting a bunch of TX errors on 5ghz and I am starting to think its because of the Intel AC3160 card in one of my old laptops. No other device ends up causing errors besides this one. So far everything seems fine.
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 2063

PostPosted: Fri Mar 22, 2024 15:34    Post subject: Reply with quote
R6200v2
DD-WRT v3.0-r55416 std (03/19/24)
Linux 4.4.302-st49 #11233 SMP Mon Mar 18 11:41:40 +06 2024 armv7l

TFTP R6250 55416.chk over 54914
No reset

wl0 Wlan Repeater wl1 AP

Working

_________________
Forum Guide Lines (with helpful pointers about how to research your router, where and what firmware to download, where and how to post and many other helpful tips!)
How to get help the right way

Before asking for help - Read the forum guidelines AND Upgrade DD-WRT!
Adblock by eibgrad (1.1M blocked) + Blocklist Collection
KACTET
DD-WRT User


Joined: 01 May 2022
Posts: 282

PostPosted: Sun Mar 24, 2024 16:00    Post subject: Reply with quote
Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: dd-wrt.v24-r55416_NEWD-2_K3.x-big-RT-N66U.trx / Linux 4.4.302-st49 #29345 Tue Mar 19 05:52:37 +06 2024 mips
Previous/Reset: r55363 / no
Mode/Status: Gateway / Up and running for 1 days, 2:15
CPU Temperature: WL0 48.5 °C (ambient temperature 20.3 °C)
Issues/Errors: Nothing significant

CPU temperature readings started changing after one second from 47.0 - 48.5 °C

Thank you BS and gurus!

_________________
Atheros
Netgear XR500 Nighthawk - DD-WRT 56409
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 56667
Broadcom
Asus RT-AC87U R - DD-WRT 56667
Asus RT-N66U - DD-WRT 56667
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
thawk
DD-WRT Novice


Joined: 26 Jul 2009
Posts: 17

PostPosted: Mon Mar 25, 2024 16:13    Post subject: Reply with quote
Router Model: Netgear R7000
Firmware Version: DD-WRT v3.0-r55416 std (03/19/24)
Kernel Version: Linux 4.4.302-st49 #11233 SMP Mon Mar 18 11:41:40 +06 2024 armv7l
Previous/Reset: DD-WRT v3.0-r55262 / No
Mode/Status: 2.4 AP - 5GHz AP - OpenVPN
Issues/Errors: No issues after running for almost 3 days.
ThrownStone
DD-WRT Novice


Joined: 28 Feb 2021
Posts: 9

PostPosted: Fri Mar 29, 2024 18:20    Post subject: Reply with quote
Router/Version: Netgear R7000
File/Kernel: DD-WRT v3.0-r55416 std (03/19/24) / Linux 4.4.302-st49 #11233 SMP Mon Mar 18 11:41:40 +06 2024 armv7l
Previous/Reset: r55460 / Reset
Mode/Status: AP Currently / GUI seems stable enough with days of messing with it.
CPU Temperature: CPU 59.7°C / WL0 53.0°C / WL1 54.3°C (ambient ~18°C)
Issues/Errors: None / User error
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum