New Build - 03/25/2024 - r55460

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5797

PostPosted: Mon Mar 25, 2024 15:26    Post subject: New Build - 03/25/2024 - r55460 Reply with quote
Welcome to Broadcom r55460 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.


CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 55416 (mirror)

OpenVPN 2.6.10: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
r54203 r54248 r54420 r54475 r54517 r54545 r54569 r54604 r54637 r54652 r54682 r54905 r54914 r55003 r55009 r55033
r55052 r55109 r55179 r55209 r55262 r55303 r55363 r55416 r55460

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6530
Location: UK, London, just across the river..

PostPosted: Mon Mar 25, 2024 15:36    Post subject: Reply with quote
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r55460 std (03/25/24)
Kernel Version Linux 4.4.302-st49 #11249 SMP Thu Mar 21 07:12:03 +06 2024 armv7l

update: CLI r55416 > r55460
reset: NO
mode: Gateway/DoH/DoT via SmartDNS, AD-Block(via script), IPset Firewall,Forced DNS,AP&Net Isolation,x3VLAN,VPN client(PBR),40 HT 2.4Ghz only
status: Operational 6h+
errors: I dont seem to find [b]/tmp/smartdns.log[/b]...checking smartdns.conf
shows that, i do have log-file /tmp/smartdns.log ..but i dont seem to have the log file created..at /tmp
log level is set to err..but even on default warn its still not created...is it disabled/stripped out by default?

Thanks BS and Team !

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 56941 WAP
TP-Link WR1043NDv2 -DD-WRT 56941 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 57515 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 57538 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 57515 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Ger482
DD-WRT User


Joined: 04 Sep 2006
Posts: 54

PostPosted: Mon Mar 25, 2024 17:04    Post subject: Reply with quote
Router Model:Asus RT-AC68U
Firmware Version: DD-WRT v3.0-r55460 std (03/25/24
Kernel Version:Linux 4.4.302-st49 #11249 SMP Thu Mar 21 07:12:03 +06 2024 armv7l
Upgraded from: 55303
Reset: no
Status: Up and stable
running Wireguard
Errors: none

as always Thank-You! to everyone involved
KACTET
DD-WRT User


Joined: 01 May 2022
Posts: 292

PostPosted: Mon Mar 25, 2024 19:06    Post subject: Reply with quote
Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r5560 std / Linux 4.4.302-st49 #11257 SMP Mon Mar 25 07:41:33 +06 2024 armv7l
Previous/Reset: r55416 / no
Mode/Status: Gateway / Up and running for 1:52 hours
CPU Temperature: CPU 63.6 °C / WL0 40.5 °C / WL1 0.0 °C (ambient temperature 17.0 °C)
Issues/Errors: yes

As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel. Crying or Very sad
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot." Wink

The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
But this does not affect the work.
Just relax
Cool


1. Failed to start OpenVPN Client via configuration file. OpenVPN Status is empty. I don’t see this problem on the second router ASUS RT-N66U.

2. CPU temperature is not displayed correctly.
CPU temperature readings started changing after one second from 63.6 - 64.1 °C

Thank you BS and gurus!

_________________
Atheros
Netgear XR500 Nighthawk - DD-WRT 56409
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 57200
Broadcom
Asus RT-AC87U R - DD-WRT 56941
Asus RT-N66U - DD-WRT 57200
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
lexridge
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 1298
Location: WV, USA

PostPosted: Mon Mar 25, 2024 21:34    Post subject: Reply with quote
Router/Version: R6400v2
File/Kernel: r55460
Previous/Reset: r53562/No Reset
Mode/Status: 2.4ghz WAP
Issues/Errors: none

Works as well at r53562 did so far.

_________________
- Linksys EA8500: I-Gateway, AP/VAP 5ghz only r56820: Features: WDS-AP, VLANs, Samba, WG, Entware
- Linksys EA8500: WDS Station x2 - r56941
- Netgear R6400v2: WAP/VAP 2.4ghz only w/VLANs over single trunk port. r56820
- Netgear R7800 (WDS-AP, WAP/VAP) - r56820: Features in use: multiple VLANs over single trunk port
- Linksys MR7350: Testing r56941
- Linksys Velop WHW03v1 x2: OpenWRT w/GRETAP tunnel for VLANs on VAPs
- OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.

- Forum member #248
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 1012

PostPosted: Tue Mar 26, 2024 14:25    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r55460) / Linux 4.4.302-st49 #11249 SMP Thu Mar 21 07:12:03 +06 2024 armv7l
Previous/Reset: DD-WRT v3.0-r55416 std (03/19/24) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + SSH (public key) + DDNS (Dynu.com) + high-speed USB Storage (guide by egc) + WireGuard server + Cron / working
Issues/Errors: none



dmesg_messages_Dlink-DIR868L-RB_r55460_2024-03-25_18-58-25.tgz
 Description:

Download
 Filename:  dmesg_messages_Dlink-DIR868L-RB_r55460_2024-03-25_18-58-25.tgz
 Filesize:  19.45 KB
 Downloaded:  49 Time(s)


_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
KACTET
DD-WRT User


Joined: 01 May 2022
Posts: 292

PostPosted: Tue Mar 26, 2024 22:26    Post subject: Reply with quote
Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: dd-wrt.v24-r55460_NEWD-2_K3.x-big-RT-N66U.trx / Linux 4.4.302-st49 #29409 Mon Mar 25 08:25:23 +06 2024 mips
Previous/Reset: r55416 / no
Mode/Status: Gateway / Up and running for 1 days, 1:01
CPU Temperature: WL0 48.5 °C (ambient temperature 20.3 °C)
Issues/Errors: Nothing significant

CPU temperature readings started changing after one second from 47.0 - 48.5 °C

Thank you BS and gurus!

_________________
Atheros
Netgear XR500 Nighthawk - DD-WRT 56409
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 57200
Broadcom
Asus RT-AC87U R - DD-WRT 56941
Asus RT-N66U - DD-WRT 57200
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 1889
Location: Hung Hom, Hong Kong

PostPosted: Wed Mar 27, 2024 3:02    Post subject: DD-WRT BS build 55460 and Asus RT-N18U Reply with quote
Router/Version: Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r55460 std (03/25/24)
Kernel: Linux rt-n18u 4.4.302-st49 #11253 Mon Mar 25 07:19:27 +06 2024 armv7l DD-WRT
Previous: DD-WRT v3.0-r55350 std (03/12/24)
Mode: WAN @ DHCP, Wireless @ AP (N/G Mixed)
Status: Core functions Working {
  Not 24/7; Not using CTF, FA, IPv6, VPN, VAP;
  USB storage(/jffs, /opt); NAS (Lighttpd, ksmbd-Samba, MiniDLNA);
  Cron enabled(default jobs deleted);
  WAN DNS disabled; DDNS (no-ip.com) In-a-Dyn OK;
  DNSmasq not serving DNS; Recursive DNS Unbound (/jffs/etc/unbound.conf);
  Entware core (CPU: armv71) installed without problem;
  Swap partition (USB) enabled for using GitHub
}
Reset: NO RESET (using command not WEBUI to flash; httpd disabled)
File: https://download1.dd-wrt.com//dd-wrtv2/downloads/betas/2024/03-25-2024-r55460/asus-rt-n18u/

Summary

NO strangeless after first firmware reboot, and after cold boot!!

All iptables trigger rules in stock firewall deleted to improve WiFi connections.

Speed Test

Wired LAN speed:

Code:
# sh stest.sh
Creating speedtest-cli.json from my.ookla.json
# speedtest --ca-certificate=/etc/ssl/ca-bundle.crt

   Speedtest by Ookla

      Server: Telstra International - Hong Kong (id: 44340)
         ISP: Hong Kong Broadband Network
Idle Latency:     2.94 ms   (jitter: 8.58ms, low: 1.87ms, high: 35.74ms)
    Download:    93.08 Mbps (data used: 47.9 MB)
                 14.15 ms   (jitter: 22.45ms, low: 6.03ms, high: 228.54ms)
      Upload:    90.68 Mbps (data used: 46.6 MB)
                 14.50 ms   (jitter: 6.39ms, low: 4.54ms, high: 43.66ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/a514c605-7b98-4f0e-9901-76ada2905a71
#
# speedtest_cli 1 1 1 1
speedtest_cli: Duration = 10.02 Download = 87.56 Mbit/s (11208.05 Kbyte/s)
speedtest_cli: Duration 10.12 Upload = 79.91 Mbit/s (10228.81 Kbyte/s)


WiFi Speed (one wall apart):

_________________
Router: Asus RT-N18U (rev. A1)

Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
GitHub: https://github.com/changmw/changmw


Last edited by mwchang on Wed Mar 27, 2024 13:13; edited 1 time in total
LemmingFactory
DD-WRT Novice


Joined: 13 Apr 2017
Posts: 14

PostPosted: Wed Mar 27, 2024 11:54    Post subject: Reply with quote
Have this build working nicely on my R6250. Seeing up to 460Mbps on my laptop.

Older versions of DD-WRT enabled the CTF+FA option, however only CTF is available with this firmware. I know from searching the forum that others have had flow acceleration working on the R6250 and they reported significant improvements in throughput and CPU usage.

I tried to manually enable the feature with the DD-WRT command interface, and after a reboot the CTF+FA option showed up in DD-WRT; however, enabling CTF+FA ended up shutting off the router ports, requiring a factory reset. Is there a way to get this to work? I recently upgraded to symmetric gigabit, so would appreciate the performance gain.

Thanks!
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 13132
Location: Netherlands

PostPosted: Wed Mar 27, 2024 12:47    Post subject: Reply with quote
LemmingFactory wrote:
Have this build working nicely on my R6250. Seeing up to 460Mbps on my laptop.

Older versions of DD-WRT enabled the CTF+FA option, however only CTF is available with this firmware. I know from searching the forum that others have had flow acceleration working on the R6250 and they reported significant improvements in throughput and CPU usage.

I tried to manually enable the feature with the DD-WRT command interface, and after a reboot the CTF+FA option showed up in DD-WRT; however, enabling CTF+FA ended up shutting off the router ports, requiring a factory reset. Is there a way to get this to work? I recently upgraded to symmetric gigabit, so would appreciate the performance gain.

Thanks!


Not sure if this applies to your situation, but from the Hardware wiki:
Note that for Flow Acceleration to be visible and selectable, the WAN interface of the router MUST be configured EITHER with DHCP or with a Static IP address, it must also have QoS disabled, and AFTER the configuration is saved and applied, the router MUST be rebooted for the option to appear.

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
LemmingFactory
DD-WRT Novice


Joined: 13 Apr 2017
Posts: 14

PostPosted: Wed Mar 27, 2024 14:16    Post subject: Reply with quote
egc wrote:
Not sure if this applies to your situation, but from the Hardware wiki:
Note that for Flow Acceleration to be visible and selectable, the WAN interface of the router MUST be configured EITHER with DHCP or with a Static IP address, it must also have QoS disabled, and AFTER the configuration is saved and applied, the router MUST be rebooted for the option to appear.


Thanks... yes, I did get FA to appear after running the commands to enable it (plus setting a static WAN IP), but enabling FA locks up the ethernet ports once enabled, requiring a factory reset. I noticed Ticket #7444 seems to address this issue (on multiple routers). Guessing that's what's going on with the R6250 as well, suggesting the issue has yet to be fixed.

https://svn.dd-wrt.com/ticket/7444
Wildlion
DD-WRT Guru


Joined: 24 May 2016
Posts: 1427

PostPosted: Fri Mar 29, 2024 1:18    Post subject: Reply with quote
Router: Buffalo WZR-1750DHP
Firmware: buffalo-wzr-1750dhp-webflash.bin (v3.0-r55460 std)
Kernel: Linux 4.4.302-st49 #11249 SMP Thu Mar 21 07:12:03 +06 2024 armv7l
Status: Working
Reset: No
Notes on configuration:

    Media Network
    DNSMasq
    Port Forwarding
    DHCP reservation
    DNSSEC
    SFE -- Disabled

Errors:

    None
Harb1
DD-WRT Novice


Joined: 13 Nov 2023
Posts: 36

PostPosted: Fri Mar 29, 2024 15:03    Post subject: New Build - 03/25/2024 - r55460 Reply with quote
Netgear r7000 Up and running for 24 hrs seems like a very good build. Thanks devs for all your hard work!!!
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14577
Location: Texas, USA

PostPosted: Fri Mar 29, 2024 16:20    Post subject: Reply with quote
Router: Linksys WRT160N v1.1
Version: reporting as 55209M std (02/27/24)
File: dd-wrt.v24_std_generic.bin
Kernel: Linux 2.4.37 #73992 Tue Feb 27 02:18:37 +06 2024 mips
Previous: DD-WRT v3.0-r54905M std (01/12/24)
Reset: No
Mode: Gateway, AP
Status: Ok
Uptime: ~25 minutes
Issues/Errors: K2.4 builds seem to be stuck at 55209 as previously noted by @lexridge:

New Build - 02/27/2024 - r55209

New Build - 03/13/2024 - r55363



2024-03-29-110440_scrot.png
 Description:
 Filesize:  139.6 KB
 Viewed:  2177 Time(s)

2024-03-29-110440_scrot.png



_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
lexridge
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 1298
Location: WV, USA

PostPosted: Fri Mar 29, 2024 16:31    Post subject: Reply with quote
kernel-panic69 wrote:
Router:
Issues/Errors: K2.4 builds seem to be stuck at 55209 as previously noted by @lexridge:

New Build - 02/27/2024 - r55209

New Build - 03/13/2024 - r55363

I had opened a ticket regarding this if you want to add a comment about it:
https://svn.dd-wrt.com/ticket/7744

_________________
- Linksys EA8500: I-Gateway, AP/VAP 5ghz only r56820: Features: WDS-AP, VLANs, Samba, WG, Entware
- Linksys EA8500: WDS Station x2 - r56941
- Netgear R6400v2: WAP/VAP 2.4ghz only w/VLANs over single trunk port. r56820
- Netgear R7800 (WDS-AP, WAP/VAP) - r56820: Features in use: multiple VLANs over single trunk port
- Linksys MR7350: Testing r56941
- Linksys Velop WHW03v1 x2: OpenWRT w/GRETAP tunnel for VLANs on VAPs
- OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.

- Forum member #248
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum