Error In make menuconfig for x86

Post new topic   Reply to topic    DD-WRT Forum Index -> Generic Questions
Author Message
priyasg
DD-WRT Novice


Joined: 21 Mar 2024
Posts: 1

PostPosted: Thu Mar 21, 2024 10:31    Post subject: Error In make menuconfig for x86 Reply with quote
~/DD-WRT/src/linux/brcm/linux-2.6.23$ make menuconfig
scripts/kconfig/mconf arch/mips/Kconfig
drivers/mtd/devices/Kconfig:8:warning: leading whitespace ignored
drivers/net/wireless/Kconfig:564: can't open file "drivers/net/wireless/madwifi/Kconfig"
make[1]: *** [/home/nexapp_server/DD-WRT/src/linux/brcm/linux-2.6.23/scripts/kconfig/Makefile:14: menuconfig] Error 1
make: *** [Makefile:446: menuconfig] Error 2

https://svn.dd-wrt.com/ticket/7745
Sponsor
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 2039

PostPosted: Thu Mar 21, 2024 16:27    Post subject: Reply with quote
Linux 2.6.x folders aren't for x86 images. Are you compiling on an x86 machine? Are you using the correct toolchain? Keep in mind that the build system isn't manipulated this way and that files have moved over the years. So you must do a little research into 'fixing' these errors.
_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
Wildlion
DD-WRT Guru


Joined: 24 May 2016
Posts: 1423

PostPosted: Thu Mar 21, 2024 22:28    Post subject: Reply with quote
The other confusing point to me is that the topic says x86, but you are building broadcom and mips ... so it sounds like you just downloaded and were trying to compile. You have to have the cross compiler (ie the tool chains)
patilakshay
DD-WRT Novice


Joined: 21 Mar 2024
Posts: 2

PostPosted: Fri Mar 22, 2024 10:19    Post subject: Reply with quote
I want to build it for x86 router and
Code:
toolchain-x86_64_gcc-13.1.0_musl
this toolchain i am using


Screenshot from 2024-03-22 15-48-06.png
 Description:
 Filesize:  22.13 KB
 Viewed:  1595 Time(s)

Screenshot from 2024-03-22 15-48-06.png


dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 2039

PostPosted: Fri Mar 22, 2024 14:41    Post subject: Reply with quote
"Let's change identities and readdress." Or did the other account get locked out for your post? Either way, the problem has been identified, and you're not comprehending what you're being told. There is no .config_x86* files in that kernel folder, so you are driving down a dead-end road.
_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
patilakshay
DD-WRT Novice


Joined: 21 Mar 2024
Posts: 2

PostPosted: Wed Mar 27, 2024 11:34    Post subject: Reply with quote
I follow the Build steps

and i ended with this error

as i am new to ddwrt i did't understand
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Generic Questions All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum