Posted: Sat Feb 24, 2024 17:22 Post subject: New Build - 02/24/2024 - r55179
Welcome to Marvell r55179 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router: Linksys WRT1900ACSv2
Firmware: DDD-WRT v3.0-r55179 std (02/24/24) from r55109.
Kernel: Linux 6.1.78 #305 SMP Sat Feb 24 05:43:06 +07 2024 armv7l
Reset:: No.
Issues/Errors:
Copying a large file from a separate SMB server (not from a router) on a PC with Win 10, it causes the router to restart at 17 seconds. No error records are saved in the log. _________________ Linksys WRT1900ACSv2
Automatically adjustable temperature, always within the range of 59-68°С.
A small addition about copying files via the SMB protocol: I changed the name of the Workgroup on my third-party server, previously they were the same. Now copying files over the network is faster and does not reboot the router. _________________ Linksys WRT1900ACSv2
Automatically adjustable temperature, always within the range of 59-68°С.
Posted: Sun Feb 25, 2024 22:18 Post subject: Still reboots with SMB file transfer
PavelVD wrote:
A small addition about copying files via the SMB protocol: I changed the name of the Workgroup on my third-party server, previously they were the same. Now copying files over the network is faster and does not reboot the router.
Router: Linksys WRT1900ACSv1
Firmware: DD-WRT v3.0-r55179 std (02/24/24) from r53633
Kernel: Linux 6.1.78 #305 SMP Sat Feb 24 05:43:06 +07 2024 armv7l
Reset: No
Issues/Errors: Router still reboots with SMB file transfers.
I was hoping that there was something to changing the name, but changing the name on the router or my computer didn't help. The router has NAS/SMB server enabled and I can connect to the share on the attached USB drive. However, on trying to transfer a file (33KB JPG file) from my computer, the router reboots. I know this is different than having a separate SMB server from the router, but I was hoping changing the name would help. It did not. Reverted back to 53633 because I use it as a file server.
Posted: Mon Feb 26, 2024 5:26 Post subject: Re: Still reboots with SMB file transfer
scopemonkey wrote:
PavelVD wrote:
A small addition about copying files via the SMB protocol: I changed the name of the Workgroup on my third-party server, previously they were the same. Now copying files over the network is faster and does not reboot the router.
Router: Linksys WRT1900ACSv1
Firmware: DD-WRT v3.0-r55179 std (02/24/24) from r53633
Kernel: Linux 6.1.78 #305 SMP Sat Feb 24 05:43:06 +07 2024 armv7l
Reset: No
Issues/Errors: Router still reboots with SMB file transfers.
I was hoping that there was something to changing the name, but changing the name on the router or my computer didn't help. The router has NAS/SMB server enabled and I can connect to the share on the attached USB drive. However, on trying to transfer a file (33KB JPG file) from my computer, the router reboots. I know this is different than having a separate SMB server from the router, but I was hoping changing the name would help. It did not. Reverted back to 53633 because I use it as a file server.
Is BS aware of this issue or has there been a bug open already? Good to know it's not just me and that there appears to be a bug with 6.1.
Change(s) (to smbd?) after 1/2/24 r54682 are causing my WRT3200ACM to reboot when transferring via SMB (from Windows 10) to flash drive attached to router. When copy progress hits 99%, it freezes and router reboots. (same transfer via FTP works properly) After reboot, when smb is again accessible, it seems the file finished transferring successfully before the reboot. r54682 and earlier have been working properly over many years.
Posted: Fri Mar 01, 2024 19:40 Post subject: Re: Still reboots with SMB file transfer
jd8121 wrote:
The latest version without this problem for me has 6.1
Firmware Version: DD-WRT v3.0-r54682 std (01/02/24)
Kernel Version: Linux 6.1.70 #209 SMP Tue Jan 2 05:27:19 +07 2024 arm
Finally had time to get back to this (been out of town) and tried 54682 on my wrt1900acs. On attempting a file transfer to an attached USB drive partition formatted with FAT32, the file would not transfer and I got an error (using macOS 14.3.1) but at least the router did not reboot. However, that drive also has partitions formatted in EXT2 (for /opt and /jffs) and all file transfers were successful without reboot. So works with EXT2 partitions and not with a FAT32 partition (at least for the current macOS). I'll keep trying the newer builds as they come out in hopes the issues are sorted out. Thanks for the help.
