AR2316 based Senao / EnGenius EOC-2611 device : dd/owrt?

Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices
Author Message
lm2lm2
DD-WRT Novice


Joined: 14 Dec 2023
Posts: 8

PostPosted: Wed Jan 03, 2024 15:17    Post subject: AR2316 based Senao / EnGenius EOC-2611 device : dd/owrt? Reply with quote
hello

i saw there are bin/images + howto to flash AR2316 based Senao / EnGenius EOC-2611 device (i own several for a tiny ngo).
redboot :
>fis create linux
==>can't program region at 0xa8720000 : unknown error
from :
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=244307#244307
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=616655

im wondering about :
a/ for old stuff, is it possible to have free license, or to use them as ap+sta without license?
b/ the ddwrt stops everytime at step 14.
c/ is it possible to run openwrt (with 8MB flash) on it? how to install it?
i just know how to compile it, but im nooob with flash and im wondering if i just have to replace the linux.bin by something of Ath25 or even that one on it?
https://oldwiki.archive.openwrt.org/toh/fon/fonera#step_1downloading_the_openwrt_images

i thank you vm for your help!
Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 15233
Location: Texas, USA

PostPosted: Wed Jan 03, 2024 16:19    Post subject: Reply with quote
Topic moved to Senao sub-forum (where it belongs).
lm2lm2 wrote:
a/ for old stuff, is it possible to have free license, or to use them as ap+sta without license?

Pretty sure the answer is NO.
lm2lm2 wrote:
b/ the ddwrt stops everytime at step 14.

Which file specifically are you trying to flash?
lm2lm2 wrote:
c/ is it possible to run openwrt (with 8MB flash) on it?

This is not the OpenWRT forum. This forum is specifically for discussing DD-WRT topics, per forum rules and guidelines.


Correct forum topic links:

Flashing Guide for all Senao/Engenius ATHEROS products
EOC-2611P ( Support DD-WRT or not? )

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
lm2lm2
DD-WRT Novice


Joined: 14 Dec 2023
Posts: 8

PostPosted: Wed Jan 03, 2024 17:03    Post subject: Reply with quote
kernel-panic69 wrote:

Which file specifically are you trying to flash?


Im following on the letter the howto on the forum for that device (redboot)

edit : it's the same as this one
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1272864#1272864

maybe that admin could help (email or PM?)
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1273194#1273194
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 15233
Location: Texas, USA

PostPosted: Wed Jan 03, 2024 19:49    Post subject: Reply with quote
Well, you picked a thread that I seemed to remember after the fact, but let me help you focus:

Test images, read from here, esp. @lexridge's post about how to get it to update. You can revert to the older image linux.bin file and webflash from there, but should be able to use the linux.bin from the current release. BrainSlayer sums up the problem:
BrainSlayer wrote:
if course you need to know how to use redboot commandline before flashing. just fix create linux does not work if the new file is bigger than the old partition. you need to recreate the partition and more important you need to erase is first. the programming error is raised since the block wasnt erased before writing


And there is a huge chance that you picked the wrong linux.bin file to flash.
lexridge wrote:
Once it reboots, you should be on r50443

If you used the router database, then you downloaded a bad file, most likely.

Serial console is definitely advised should anything go awry with whichever path you take.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum