[otsv]

I have

==========================================================

root@DD-WRT:~# ls -la /dev/usb
drwxr-xr-x 1 root root 0 Jan 1 1970 .
drwxr-xr-x 1 root root 0 Jan 1 1970 ..
crw-rw---- 1 root root 180, 0 Jan 1 1970 lp0
root@DD-WRT:~#

But i don't know how can y use my printer. I have installed printer with TCP/IP port 192.168.1.1 with number 9100 and this don't work.
I forget something ?
Thank You

[otsv]

Hello. I don't speack english very well. But i hope that i can been understended.
I can see my printer in telnet but i can't install printer server. What can i do with this ? Thank You


root@DD-WRT:~# ipkg install p910nd
ERROR: File not found: /jffs/usr/lib/ipkg/lists/whiterussian
You probably want to run `ipkg update'
ERROR: File not found: /jffs/usr/lib/ipkg/lists/non-free
You probably want to run `ipkg update'
ERROR: File not found: /jffs/usr/lib/ipkg/lists/backports
You probably want to run `ipkg update'
ERROR: File not found: /jffs/usr/lib/ipkg/lists/whiterussian
You probably want to run `ipkg update'
ERROR: File not found: /jffs/usr/lib/ipkg/lists/non-free
You probably want to run `ipkg update'
ERROR: File not found: /jffs/usr/lib/ipkg/lists/backports
You probably want to run `ipkg update'
ipkg_get_install: ERROR: Cannot find package p910nd in /jffs/usr/lib/ipk
ipkg_get_install: Check the spelling and maybe run `ipkg update'.

root@DD-WRT:~# dmesg | grep usb
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 07:27:21 May 21 2008
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
usb-ohci.c: usb-00:03.0, PCI device 14e4:471a
usb.c: new USB bus registered, assigned bus number 1
usb.c: new USB bus registered, assigned bus number 2
usb.c: registered new driver usblp
printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vi
pid 0x323A
usb.c: USB disconnect on device 00:03.1-0 address 1
usb.c: USB bus 2 deregistered

root@DD-WRT:~# ls -la /dev/usb/
drwxr-xr-x 1 root root 0 Jan 1 1970 .
drwxr-xr-x 1 root root 0 Jan 1 1970 ..
crw-rw---- 1 root root 180, 0 Jan 1 1970 lp0
root@DD-WRT:~#

[otsv]

And i have this

root@DD-WRT:~# netstat -an
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:53 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:23 0.0.0.0:* LISTEN
tcp 0 0 192.168.1.2:80 192.168.1.3:1041 TIME_WAIT
tcp 0 0 192.168.1.2:80 192.168.1.3:1053 TIME_WAIT
tcp 0 0 192.168.1.2:80 192.168.1.3:1065 TIME_WAIT
tcp 0 132 192.168.1.2:23 192.168.1.3:4376 ESTABLISHE
tcp 0 0 192.168.1.2:80 192.168.1.3:1044 TIME_WAIT
tcp 0 0 192.168.1.2:80 192.168.1.3:1036 TIME_WAIT
tcp 0 0 192.168.1.2:80 192.168.1.3:1056 TIME_WAIT
tcp 0 0 192.168.1.2:80 192.168.1.3:1047 TIME_WAIT
tcp 0 0 192.168.1.2:80 192.168.1.3:1039 TIME_WAIT
tcp 0 0 192.168.1.2:80 192.168.1.3:1059 TIME_WAIT
tcp 0 0 192.168.1.2:80 192.168.1.3:1050 TIME_WAIT
tcp 0 0 192.168.1.2:80 192.168.1.3:1062 TIME_WAIT
udp 0 0 0.0.0.0:1025 0.0.0.0:*
udp 0 0 0.0.0.0:53 0.0.0.0:*
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ] DGRAM 39517
root@DD-WRT:~#

[otsv]

I can do this. I see in the services of Windows and i have some services not run. After this i can run ipkg update and 910 install