New Build - 06/02/2023 - r52869

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5630

PostPosted: Fri Jun 02, 2023 18:26    Post subject: New Build - 06/02/2023 - r52869 Reply with quote
Welcome to Atheros r52869 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.


CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 52720 (mirror)

OpenVPN 2.6.3: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
swdrv inadyn VXLAN MSTPD mac80211 smartmontools zstd Zebra WSD LTO Python obsolete openNDS brcm24 pound rsync
IPTraf BOINC nvram libffi x86 mt76 range octeon rsync Btrfs openNDS ralink NFS nodogsplash Samba4 missing drivers NFS
In-kernel SMB (ksmbd/tools 3.4.6/3.4.5): guest user is selectable. WSD updateANTFS/NTFS3 kernel mode driver++++
Bad blocks handling has been reworked again: R7800, XR450, XR500, IPQ based device w/ defective NAND, boot loops etc.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
ramblin
DD-WRT User


Joined: 03 Nov 2015
Posts: 316
Location: Florida, USA

PostPosted: Fri Jun 02, 2023 19:26    Post subject: Reply with quote
Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r52869 std (06/02/23)
Kernel: Linux 4.9.337 #1971 SMP Fri Jun 2 13:00:18 +07 2023 armv7l
Reset: No ...GUI upgrade from r52671
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: None

Router: Linksys ea8500 ..WDS Stations ... X (2)
Firmware: DD-WRT v3.0-r52869 std (06/02/23)
Kernel: Linux 4.9.337 #1971 SMP Fri Jun 2 13:00:18 +07 2023 armv7l
Reset: No ...GUI upgrade from r52671
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: None

VOIP phone didn`t come right back up but restarted it and everything is fine. THANKS BS and all mods that make this project GREAT !

_________________
......All GOOD here... Just Handshakes and Time Stamps !......
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6259
Location: Texas

PostPosted: Fri Jun 02, 2023 21:33    Post subject: Reply with quote
Linksys EA8500 ...main gateway
DD-WRT v3.0-r52869 std (06/02/23)
Linux 4.9.337 #1971 SMP Fri Jun 2 13:00:18 +07 2023 armv7l
scp 'firmware.bin install over r52703
she is worky alrighty

#

hellfire ...I tried
Code:
mrjcd@daDeb:~$ scp firmware.bin root@160nl-switch.mrjcd.com:/tmp
DD-WRT v3.0-r52720 std (c) 2023 NewMedia-NET GmbH
Release: 05/27/23
Board: Linksys WRT160NL
sh: /usr/libexec/sftp-server: not found
scp: Connection closed
mrjcd@daDeb:~$
I remembered what an oldass thang it is Twisted Evil
Linksys WRT160NL
DD-WRT v3.0-r52869 std (06/02/23)
Linux 3.10.108-d11 #134823 Fri Jun 2 14:53:41 +06 2023 mips
GUI install over r52720 --- worky ok

EDIT:
sompin veddy wacky with 160NL channel survey
here is EA8500


here is the 160NL Shocked
https://mrjcd.com/junk/dd-wrt/r52869CHsurvey/r52869WRT160NLchSurvey.pdf
CR_Apollo
DD-WRT User


Joined: 25 Dec 2020
Posts: 90
Location: Toronto - Canada

PostPosted: Fri Jun 02, 2023 22:01    Post subject: Reply with quote
Netgear R7800
Firmware Version Firmware: DD-WRT v3.0-r52869 std (06/02/23)
Kernel Version Linux 4.9.337 #1973 SMP Fri Jun 2 13:20:58 +07 2023 armv7l
Upgrade Method HTTPS via Web GUI
Previous Build/Reset r52651/NO
Up Time 30 minutes. Logs look good so far.

Configuration Type Gateway

WAN DHCP. LAN/wlan0 5Ghz vanilla VHT80+80 br0 with AP Mesh attached. Wlan0.1 Isolated AP Isolated network with FW rule(s) to wlan1 resource(s). Wlan1 2.4Ghz Vanilla 20/40 without Masquerade/NAT. Wlan1.1 Isolated AP and Isolated network. All clients with static leases x4 DHCP. MAC Filtering. Access restrictions. Ignore WAN DNS with static DNS servers, DNSMASQ, cached DNSSEC, Validate DNSSEC replies, no DNS rebind, Query DNS strict order. WPA 3 and WPA 2. Syslogd to FS on br0 LAN. Cooling fan USB attached. WAN traffic counter.

Everything functioning without issue. Thanks BS and team!


ISSUE DISCOVERED around 52671 or so.... but is happening daily with this version, though.

Everyday after an access restriction finishes, the clients do not have access to internet services. Only need to go to the access restrictions and hit apply to make the connections work again. This needs to be done daily following the blocked schedule now.


Last edited by CR_Apollo on Mon Jun 05, 2023 18:26; edited 5 times in total
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6259
Location: Texas

PostPosted: Fri Jun 02, 2023 22:37    Post subject: Reply with quote
Netgear WNDR3700 V4
DD-WRT v3.0-r52869 std (06/02/23)
Linux 3.18.140-d6 #173828 Fri Jun 2 17:41:02 +06 2023 mips
scp 'firmware.bin install over r52703
WAP + isolated guest net + OVPN server
all seems ok
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1002

PostPosted: Fri Jun 02, 2023 22:58    Post subject: Reply with quote
Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r52869 std (06/02/23)
Previous/Reset: DD-WRT v3.0-r52720 std (05/27/23) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: None

_________________
Netgear R9000
DD-WRT v3.0-r55209 std (02/27/24)
Linux 4.9.337 #713 SMP Fri Feb 2 04:37:42 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 939

PostPosted: Sat Jun 03, 2023 0:18    Post subject: Reply with quote
Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r52869) / Linux 4.9.337 #1973 SMP Fri Jun 2 13:20:58 +07 2023 armv7l
Previous/Reset: DD-WRT v3.0-r52720 std (05/27/23) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 20MHz, 802.11r (FT), SSH (public key), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), CIFS Automount, WireGuard server, Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
abhijitat
DD-WRT User


Joined: 06 Feb 2020
Posts: 167
Location: Maharashtra, India

PostPosted: Sat Jun 03, 2023 4:46    Post subject: Reply with quote
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r52869 std (06/02/23)
Kernel: Linux 4.9.337 #1973 SMP Fri Jun 2 13:20:58 +07 2023 armv7l
File/Upload: dd-wrt-webupgrade.bin / Upload using CLI
Mode: Router Mode
Reset: No
Previous: DD-WRT v3.0-r52703 std (05/26/23)
Setup Using: Wireless 2.4 GHz, 5.0 GHz, NTP TimeSync, WireGuard, Samba
Status: Stable, Working Fine ; running DD-WRT firmware type for 2.4ghz & 5ghz, uptime 2+ Hrs.




Thank you BrainSlayer for Wonderful firmware.

Thanks all Guru for your help in forums.


Last edited by abhijitat on Sat Jun 03, 2023 9:03; edited 1 time in total
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 729

PostPosted: Sat Jun 03, 2023 8:25    Post subject: Reply with quote
Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r52869 std (06/02/23) (prev. DD-WRT v3.0-r52671 std (05/24/23))
Kernel: Linux 4.9.337 #1973 SMP Fri Jun 2 13:20:58 +07 2023 armv7l
Mode: Gateway, SFE disabled, 2.4G and 5G wifi (FW: DD-WRT), Wireguard for external access, WAN to 4G (DHCP Client), Keep Alive reboot 6:02 in the morning
Reset: No
Status: Installed a few minutes ago, OK.
computerperson
DD-WRT Novice


Joined: 16 May 2019
Posts: 38

PostPosted: Sat Jun 03, 2023 19:49    Post subject: Netgear R7800 r52869 std (06/02/23) Reply with quote
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r52869 std (06/02/23)
Kernel: Linux 4.9.337 #1973 SMP Fri Jun 2 13:20:58 +07 2023 armv7l
File/Upload: dd-wrt-webupgrade.bin via GUI
Mode: Router
Reset: No
Previous: DD-WRT 05/27/2023 - r52720
Setup Using: Wireless 2.4 GHz, 5.0 GHz, Samba
Status: OK
Issues: Last several updates, router will not complete boot on its own, is unreachable. Have to power cycle router to reboot and it then loads and works fine including startup script. Power cycle or reboot takes 2.5 - 3 minutes.

_________________
- a candle loses nothing by lighting another candle
KACTET
DD-WRT User


Joined: 01 May 2022
Posts: 222

PostPosted: Sun Jun 04, 2023 9:00    Post subject: Reply with quote
Router/Version: Netgear XR500
Update method: WebUpgrade
File/Kernel: dd-wrt-webupgrade.bin r52869 / Linux 4.9.337 #1973 SMP Fri Jun 2 13:20:58 +07 2023 armv7l
Previous/Reset: r52720 / no
Mode/Status: Gateway / Up and running for 3:15 hours
Issues/Errors: Nothing significant

Thank you BS and gurus!

_________________
Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55109
Broadcom
Asus RT-AC87U R - DD-WRT 55109
Asus RT-N66U - DD-WRT 55109
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
nkaufman
DD-WRT User


Joined: 21 Jun 2015
Posts: 258

PostPosted: Sun Jun 04, 2023 14:24    Post subject: Re: Netgear R7800 r52869 std (06/02/23) Reply with quote
computerperson wrote:
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r52869 std (06/02/23)
Kernel: Linux 4.9.337 #1973 SMP Fri Jun 2 13:20:58 +07 2023 armv7l
File/Upload: dd-wrt-webupgrade.bin via GUI
Mode: Router
Reset: No
Previous: DD-WRT 05/27/2023 - r52720
Setup Using: Wireless 2.4 GHz, 5.0 GHz, Samba
Status: OK
Issues: Last several updates, router will not complete boot on its own, is unreachable. Have to power cycle router to reboot and it then loads and works fine including startup script. Power cycle or reboot takes 2.5 - 3 minutes.


Yes, I've been facing the same issue. After updating I have to turn power off to router and then turn it back on for it to start. As you said, started happening the past several updates.
I use Firefox and have to disable Avast before doing an update.
Update while hard-wired into router
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1002

PostPosted: Sun Jun 04, 2023 14:38    Post subject: Re: Netgear R7800 r52869 std (06/02/23) Reply with quote
nkaufman wrote:
computerperson wrote:
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r52869 std (06/02/23)
Kernel: Linux 4.9.337 #1973 SMP Fri Jun 2 13:20:58 +07 2023 armv7l
File/Upload: dd-wrt-webupgrade.bin via GUI
Mode: Router
Reset: No
Previous: DD-WRT 05/27/2023 - r52720
Setup Using: Wireless 2.4 GHz, 5.0 GHz, Samba
Status: OK
Issues: Last several updates, router will not complete boot on its own, is unreachable. Have to power cycle router to reboot and it then loads and works fine including startup script. Power cycle or reboot takes 2.5 - 3 minutes.


Yes, I've been facing the same issue. After updating I have to turn power off to router and then turn it back on for it to start. As you said, started happening the past several updates.
I use Firefox and have to disable Avast before doing an update.
Update while hard-wired into router


I think you need to erase nvram and then re-enter your settings manually. It sounds to me like your nvram has something corrupted or incorrect. I know this is a pain to do, but I've been there before and this does solve many issues.

_________________
Netgear R9000
DD-WRT v3.0-r55209 std (02/27/24)
Linux 4.9.337 #713 SMP Fri Feb 2 04:37:42 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
nkaufman
DD-WRT User


Joined: 21 Jun 2015
Posts: 258

PostPosted: Sun Jun 04, 2023 14:50    Post subject: Re: Netgear R7800 r52869 std (06/02/23) Reply with quote
MLandi wrote:

I think you need to erase nvram and then re-enter your settings manually. It sounds to me like your nvram has something corrupted or incorrect. I know this is a pain to do, but I've been there before and this does solve many issues.


I did ask about this earlier in one of the New Build posts.
Because I made changes over time to some settings, I'm not sure what's the best way to capture current settings so that I can replicate that after erasing nvram.

Also, I think a post mentioned that telnet into dd-wrt and running - 'nvram erase && reboot' does not always work. I might be mistaken but that's what I understood.

So, should I telnet, run 'nvram show' save all settings in a file.
Run 'nvram erase && reboot'
run 'nvram show' again and save in another file
Compare the 2 files using winmerge or something.
Change current settings to old settings values wherever needed
Will that work?

Thanks
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6350
Location: UK, London, just across the river..

PostPosted: Sun Jun 04, 2023 16:33    Post subject: Reply with quote
Router Model Netgear R7800
Firmware Version Firmware: DD-WRT v3.0-r52869 std (06/02/23)
Kernel Version Linux 4.9.337 #1973 SMP Fri Jun 2 13:20:58 +07 2023 armv7l

update: CLI r52720 > r52869
reset: NO
mode: Gateway
status: Operational 12h+
errors: Nothing new, yet...all working as it should...router rebooted with no problem...!

Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r52869 std (06/02/23)
Kernel Version Linux 3.18.140-d6 #173800 Fri Jun 2 16:44:40 +06 2023 mips

update: CLI r52720 > r52869
reset: NO
mode: Gateway
status: Operational 12h+
errors: Nothing new, yet... Thanks BS and Team !!

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55179 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall
TP-Link WR1043NDv2 -DD-WRT 55179 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 55179 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55179 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55109 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum