Posted: Sat May 27, 2023 13:01 Post subject: New Build - 05/27/2023 - r52720
Welcome to Broadcom r52720 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 26 Mar 2013 Posts: 1856 Location: Hung Hom, Hong Kong
Posted: Sat May 27, 2023 13:28 Post subject: DD-WRT BS build 52720 and Asus RT-N18U
Router/Version:Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r52720 std (05/27/23)
Kernel: Linux 4.4.302-st40 #9443 Sat May 27 03:15:04 +06 2023 armv7l
Previous: DD-WRT v3.0-r52569 std (05/15/23)
Mode: WAN @ DHCP, Wireless @ AP (Mixed)
Status: Working {
Not 24/7; Not using CTF, FA, STP, IPv6, VPN, VAP;
USB storage(/jffs, /opt); NAS (ksmbd, lighttpd, minidlna);
WAN DNS disabled; DDNS (no-ip.com) In-a-Dyn OK;
DNSmasq not serving DNS; Recursive DNS Unbound (/jffs/etc/unbound.conf);
Entware core (CPU: armv71) installed without problem
}
Reset: No RESET during firmware upgrade
File:https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2023/05-27-2023-r52720/asus-rt-n18u/
Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx r52720 / Linux 4.4.302-st40 #9447 SMP Sat May 27 03:39:55 +06 2023 armv7l
Previous/Reset: 52509 / no
Mode/Status: Gateway / Up and running for 3:12 hours
Issues/Errors: Nothing significant
As always, the Quantenna chip has its own characteristics.
Can't set channel. You can't disable 5.0 GHz either.
Even through the schedule menu.
Errors in wireless RX packets.
The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
____________________________________________________________________________________________
Router/Version: Linksys WRT54GL v1.1
Update method: WebUpgrade / TFTP
File/Kernel: dd-wrt.v24 mini generic r52720 / 0 2023 mips
Previous/Reset: r52485 / yes
Mode/Status: AP wired and wireless / 0.
Issues/Errors: YES
Failed to update. The update was successfully downloaded through the browser, but the version remained the same. Installed via TFTP, 52485 returned. I think this is all because of the size of the flash drive.
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55779
Broadcom
Asus RT-AC87U R - DD-WRT 55779
Asus RT-N66U - DD-WRT 55779
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Posted: Sun May 28, 2023 17:00 Post subject: Performance
Router Netgear R7000
Configured as Gateway
Install 27-May-2023 build today 28-May-2023
Using Wireguard Tunnel via StrongVPN scripted configuration file
Router behind ISP Router
Wan DNS disable on R7000, using Google DNS
Lan and wi-fi internet access available
Getting connection resets when doing google searches.
Added google dns in the wireguard tunnel, no change.
SFG=CTF
Flow=CTF & FA
Router Model:Asus RT-AC68U
Firmware Version: DD-WRT v3.0-r52720 std (05/27/23)
Linux 4.4.302-st40 #9439 SMP Sat May 27 02:47:49 +06 2023 armv7l:33:40 +06 2023 armv7l
Reset: no
Status: Up and stable very good throughput
running Wireguard
Errors: none for 40 hrs
Thank-You! to everyone involved ,you people are amazing never stopping until it's perfect again and again. thousands of people thank you.
Router: Asus RT-AC66U Mode: AP
File: dd-wrt-52720-Asus_RT-AC66U.trx.
Kernel: Well, the one included in the build.
Reset: no.
Status: Working.
Previous build: 51679
Uptime: Some thirty minutes.
Flashed via: GUI.
With the previous build, I got some 60 Mbps download, on both Ethernet and wireless. With this build, I get some 25 on Ethernet and (weirdly) for 35 on wireless.
EDIT: the culprit seems to be QoS (which a is a service that DD-WRT provides). Previously, I used QoS, and all was fine. But now, even after reverting to the firmware that I used before (!) - but perhaps because I used a config saved from the newer version - enabling QoS hammers my speeds. Disabling QoS fixes the problem. Can anyone advise (on separate thread if necessary)? (I do not think that I have any other device that has been hogging the network whilst I have been testing.) _________________ My router: Asus RT-AC66U
Operating systems on devices that I use with that router: GNU-Linux; Windows 10; Android 13
Firmware: v3.0-r52720 std (05/27/23)
Router/Version: Netgear R7000 Kernel: Linux 4.4.302-st40 #9439 SMP Sat May 27 02:47:49 +06 2023 armv7l
Previous: v3.0-r52459 std (05/08/23)
Mode/Status: AP wired and wireless / Up and running for 2 days
Reset: Soft boot before and after upgrade
Temperatures: CPU 59.1 °C / WL0 45.5 °C / WL1 50.8 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (Bell Canada "Fibe", 500/500 Mbps).
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 N/G Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Router/Version: ASUS RT-N66U
File/Kernel: Linux 4.4.302-st40 #23945 Sat May 27 03:53:23 +06 2023 mips
Previous/Reset: DD-WRT v3.0-r52369 big no reset. Updated via webif.
Mode/Status: WAN disabled, port assigned to LAN VLAN, AP N only, 40 MHz wide
Issues/Errors: DDNS client throws this error, SSL and external IP check are enabled (also happened on 52369)
Quote:
In-a-dyn version 2.11.0 -- Dynamic DNS update client.
Startup delay: 30 sec ...
Failed connecting to ip1.dynupdate.no-ip.com: Operation in progress
Communication with checkip server ip1.dynupdate.no-ip.com failed, run again with 'inadyn -l debug' if problem persists
Retrying with built-in 'default', http://ifconfig.me/ip ...
Please note, ip1.dynupdate.no-ip.com seems unstable, consider overriding it in your configuration with 'checkip-server = default'
Update forced for alias XXXX, new IP# XXXX
Updating IPv4 cache for XXXX
Failed connecting to ip1.dynupdate.no-ip.com: Operation in progress
Communication with checkip server ip1.dynupdate.no-ip.com failed, run again with 'inadyn -l debug' if problem persists
Retrying with built-in 'default', http://ifconfig.me/ip ...
Please note, ip1.dynupdate.no-ip.com seems unstable, consider overriding it in your configuration with 'checkip-server = default'
Joined: 26 Mar 2013 Posts: 1856 Location: Hung Hom, Hong Kong
Posted: Thu Jun 01, 2023 12:02 Post subject:
ciscodlink wrote:
Router/Version: ASUS RT-N66U
....
Issues/Errors: DDNS client throws this error, SSL and external IP check are enabled (also happened on 52369)
Code:
In-a-dyn version 2.11.0 -- Dynamic DNS update client.
Startup delay: 30 sec ...
Failed connecting to ip1.dynupdate.no-ip.com: Operation in progress
Communication with checkip server ip1.dynupdate.no-ip.com failed, run again with 'inadyn -l debug' if problem persists
Retrying with built-in 'default', http://ifconfig.me/ip ...
Please note, ip1.dynupdate.no-ip.com seems unstable, consider overriding it in your configuration with 'checkip-server = default'
Update forced for alias XXXX, new IP# XXXX
Updating IPv4 cache for XXXX
....