[blkt]

Welcome to Atheros r52703 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 52671 (mirror)

• OpenVPN 2.6.3: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
• mDNS/Avahi ~2023 L7 ayb fw log no swdrv sdns Plex SNMP fix BBox VXLAN WG zfs APFS httpd WolfSSL Zabbix USB swdrv
• In-kernel SMB (ksmbd/tools 3.4.6/3.4.5): guest user is selectable. • WSD update • ANTFS/NTFS3 kernel mode driver++++
• Bad blocks handling has been reworked again: R7800, XR450, XR500, IPQ based device w/ defective NAND, boot loops etc.

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[mrjcd]

Linksys EA8500 ...main gateway
DD-WRT v3.0-r52703 std (05/26/23)
Linux 4.9.337 #1936 SMP Fri May 26 09:48:10 +07 2023 armv7l
GUI install over r52671
she is all worky veddy good

[IONK]

Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r52703) / Linux 4.9.337 #1938 SMP Fri May 26 10:08:18 +07 2023 armv7l
Previous/Reset: DD-WRT v3.0-r52671 std (05/24/23) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 20MHz, 802.11r (FT), SSH (public key), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), CIFS Automount, WireGuard server, Cron / working
Issues/Errors: none

[KACTET]

Router/Version: Netgear XR500
Update method: WebUpgrade
File/Kernel: dd-wrt-webupgrade.bin / Linux 4.9.337 #1938 SMP Fri May 26 10:08:18 +07 2023 armv7l
Previous/Reset: r52671 / no
Mode/Status: Gateway / Up and running for 3:01 hours
Issues/Errors: Nothing significant
____________________________________________________________________________________________
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #172762 Fri May 26 12:52:09 +06 2023 mips
Previous/Reset: r52671 / no
Mode/Status: AP wired and wireless / Up and running for 3:43 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch

Thank you BS and gurus!

[mrjcd]

Netgear WNDR3700 V4
DD-WRT v3.0-r52703 std (05/26/23)
Linux 3.18.140-d6 #172804 Fri May 26 14:24:24 +06 2023 mips
scp 'firmware.bin' install over r52671
WAP + isolated guest net + OVPN server
worky ok

[xostia]

Router/Version: TPlink Archer C7 v2
Update method: WebUpgrade
File/Kernel: Linux 3.18.140-d6 #172782 Fri May 26 13:36:52 +06 2023 mips
Previous/Reset: r52656 / no
Mode/Status: AP
Issues/Errors: Reboots with intense wifi traffic. USB mount took many minutes (it was fast before). Thank you for your work.

[CR_Apollo]

Netgear R7800
Firmware Version DD-WRT v3.0-r52703 std (05/26/23)
Kernel Version Linux 4.9.337 #1938 SMP Fri May 26 10:08:18 +07 2023 armv7l
Upgrade Method HTTPS (Had to bypass site certificate issues) via Web GUI
Previous Build/Reset r52651/NO
Up Time 30 minutes. Logs looking good so far.

Configuration Type Gateway

WAN DHCP. LAN/wlan0 5Ghz vanilla VHT80+80 br0 with AP Mesh attached. Wlan0.1 Isolated AP Isolated network with FW rule(s) to wlan1 resource(s). Wlan1 2.4Ghz Vanilla 20/40 without Masquerade/NAT. Wlan1.1 Isolated AP and Isolated network. All clients with static leases x4 DHCP. MAC Filtering. Access restrictions. Ignore WAN DNS with static DNS servers, DNSMASQ, cached DNSSEC, Validate DNSSEC replies, no DNS rebind, Query DNS strict order. WPA 3 and WPA 2. Syslogd to FS on br0 LAN. Cooling fan USB attached. WAN traffic counter.

Everything functioning without issue. Thanks BS and team!

[thommy181]

Router: Tp-Link TL-WDR3600 v 1.5
Kernel: Linux 3.10.108-d11 #133827 Fri May 26 11:25:31 +06 2023 mips
Reset: No
Mode: Internet gateway, WIFI 5GHz AP, dnsmasq, firewall
Issues: Some yellow marked events in logs. That's nothing significant
Status: Working

Device working rather good. Performance is on acceptable level.

[ccbrianf]

Linksys EA8500 ...main gateway
DD-WRT v3.0-r53130 std (06/29/23)
Linux 4.9.337 #2031 SMP Thu Jun 29 00:37:23 +07 2023 armv7l
GUI install over r53045
Errors: For the last two builds
* USB with /opt and swap doesn't mount until hitting Apply on the USB page

Reverted back to r53045

Entware wget does support https, just not the stripped down wget included in dd-wrt.