Posted: Wed May 24, 2023 12:45 Post subject: New Build - 05/24/2023 - r52671
Welcome to Broadcom r52671 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-52671_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r52671 big (05/24/23) (prev. DD-WRT v3.0-r52596 big (05/18/23)
Kernel: Linux 4.4.302-st40 #23845 Wed May 24 03:39:45 +06 2023 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Installed a few hours ago, OK.
Posted: Wed May 24, 2023 21:22 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r52671 std (05/24/23) Kernel: Linux 4.4.302-st40 #9400 SMP Wed May 24 02:24:44 +06 2023 armv7l Mode: Gateway, Wireless AP, Static Leases, Dnsmasq Caching. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope, ran remove unused NVRAM parameters script. Previous: 05-23-2023-r52656 Status: Working very well so far; still testing, will post logs later. wl: 14E4:4360 Overclock (STOCK): 1000,800 (Stock for now, 1200,1600 later if it actually works. RAM OC appears to be broken in previous builds.) Temperatures: CPU 64.7 °C / WL0 53.0 °C / WL1 54.5 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
Speedtest.jpg
Description:
Speedtest Over 5.8GHz Wireless. ISP Spec: 500 Mbps Down / 25 Mbps Up.
Router/Version: 1x AC88U C1 & 1x AC68U
File/Kernel: DD-WRT v3.0-r52671 std (05/24/23) / Linux 4.4.302-st40 #9400 SMP Wed May 24 02:24:44 +06 2023 armv7l
Previous/Reset: 2023/05-23-2023-r52656/ / no
Mode/Status: Gateway + AP & Router + AP connected by CAT5E
Issues/Errors: After following various WiFi optimization guides / threads on the forum no issues so far. Random disconnects ios devices seem solved (could be the optimized settings)
Router Model: Netgear R7000
Firmware Version: DD-WRT v3.0-r52671 std (05/24/23)
Kernel Version: Linux 4.4.302-st40 #9400 SMP Wed May 24 02:24:44 +06 2023 armv7l DD-WRT
Previous/Reset: DD-WRT v3.0-r51275 / No
Mode/Status: 2.4 AP - 5GHz AP - OpenVPN
Issues/Errors: As with the last serveral versions (since OpenVPN was updated to 2.6.*) After two day, like clockwork, the OpenVPN process dies -- without any error logs written.