Posted: Mon May 22, 2023 20:30 Post subject: Routing Question
Hi,
I am on Netgear R9000 with connection to WAN.
IP internal is 10.76.0.254
In the basement I have an WNDR3700V4 with IP adress 10.76.0.252 connected to the R9000 router via LAN. (WAN connection type is disabled)
All devices are on build r52596.
To WNDR3700 is a IoT Device connected via LAN, which I have assigned via DHCP static lease IP 10.76.0.173
Now I have the following question. For the IoT device is a software available to monitor the status, but this software is only suitable with connection to the IP 192.168.16.254 - this is hardcoded in the software.
Can you help me, how to solve this with I kind of NAT or routing, whatever the correct wording is?
If the IoT device has a hard-coded static IP, it seems to me the only option is to change the whole network subnet to match it. So make the network 192.168.16.0/24 instead of 10.76.0.0/16. Then make sure that DHCP will never assign the IoT device's IP to anything else.
No, IoT has IP 10.76.0.173 assigned via DHCP static lease.
But the monitoring software connects to 192.168.16.254 and this IP is not configurable in the software running on my Windows PC.
The device has a built in hotspot, where you normally connect the computer. But for this I have to be in the proximity.
And I know from other users they use this method via LAN connection and a route in their Fritz Box Router.
But I do not know how to do this with dd wrt in my setup
Joined: 16 Nov 2015 Posts: 6446 Location: UK, London, just across the river..
Posted: Mon May 29, 2023 12:38 Post subject:
k3067e3 wrote:
Still looking for a solution...
Can anyone help?
as it was suggested, change the local IP subnet to 192.168.16.0/24 this will include 10.76.16.254.. that is the best advice so far, unless you missed to tell us something or misinterpreted it..
what is the R9000 static IP is it different from 192.168.16.0/24 ? _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913