Posted: Mon May 08, 2023 5:43 Post subject: New Build - 05/08/2023 - r52459
Welcome to Broadcom r52459 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: RT-AC68UC1
File/Kernel: asus_rt-ac68u-firmware.trx / Linux 4.4.302-st38 #9289 SMP Mon May 8 02:11:25 +06 2023 armv7l
Previous/Reset: DD-WRT v3.0-r49268 std (06/19/22) / no
Mode/Status: wl0 AP / wl1 Station Bridge. SFE disabled since not using as a router and only as bridge and AP
Issues/Errors:
First time updating in almost a year. Seems ok so far after 1 hour of uptime. _________________ RT-AX86U MerlinWRT & RT-AC68U DD-WRT
Joined: 16 Nov 2015 Posts: 6410 Location: UK, London, just across the river..
Posted: Mon May 08, 2023 8:24 Post subject:
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r52459 std (05/08/23)
Kernel Version Linux 4.4.302-st38 #9289 SMP Mon May 8 02:11:25 +06 2023 armv7l
update: CLI r52369 > r52459
reset: NO
mode: Gateway, x3 Vlan (via GUI), AP&Net Isolation, Ad-block, Firewall, static leases via advanced dnsmasq rules, DHCP & DNS (forced) via SmartDNS - DoH, VPN with PBR, (wifi is off)...
status: Operational 20min+
errors: Nothing new, yet...Thanks BS and Team ! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Linksys E2500
DD-WRT v3.0-r52459 mega (05/08/23)
Linux 4.4.302-st38 #23488 Mon May 8 03:23:13 +06 2023 mips
GUI install over r52432
'dd-wrt.v24-52459_NEWD-2_K3.x_mega.bin'
used as simple WAP
all good
Joined: 18 Mar 2014 Posts: 12837 Location: Netherlands
Posted: Mon May 08, 2023 12:11 Post subject:
Router Model: Linksys EA6900 (XVortex CFE)
Firmware Version: DD-WRT v3.0-r52459M Community Build (05/08/23)
Kernel Version: Linux 4.4.302-st38 #1 SMP Mon May 8 12:21:00 CEST 2023 armv7l
Upgraded from DD-WRT v3.0-r52217M Community Build (04/01/23) via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)
Reset: No not this time.
Configuration: Default gateway mode, 2,4GHz wireless running with unbridged VAP, 5GHz running, some static leases and some port range forwarding.
WireGuard client running with PBR.
OpenVPN client with PBR running.
IPv6 working.
NAS and ksmbd working.
NVRAM size 56K (NVRAM size should not be a problem with the Xvortex CFE)
Joined: 18 Mar 2014 Posts: 12837 Location: Netherlands
Posted: Mon May 08, 2023 12:35 Post subject:
Router Model: Netgear R6400v2, board_id: U12H332T
Firmware Version: DD-WRT v3.0-r52459M Community Build (05/08/23)
Kernel Version: Linux 4.4.302-st38 #2 SMP Mon May 8 13:18:07 CEST 2023 armv7l
Upgraded from: DD-WRT v3.0-r52242M Community Build (04/08/23)
Reset: No not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, 2,4GHz and 5Ghz working, USB storage NAS working. IPv6 working. SmartDNS working with DoT.
OpenVPN server working.
WireGuard server working with 8 clients (phones, Windows and two other routers for site-to-site setup) also supports IPV6 clients.
mDNS/Avahi working.
IPv6 working.
Firmware Version: DD-WRT v3.0-r52459M Community Build (05/08/23)
At first everything seemed to be good, the longer the router runs for at least 4 hours, the Internet breaks down until the only error message, no network available, come! After router restart it runs again
Router/Version: Asus RT-AC88U
File/Kernel: DD-WRT v3.0-r52459 std (05/08/23) / Linux 4.4.302-st38 #9294 SMP Mon May 8 02:43:01 +06 2023 armv7l
Previous/Reset: DD-WRT v3.0-r52369 std (04/20/23) / No
Mode/Status: 2.4 repeater - 5GHz AP - WireGuard / OK
Issues/Errors: Up for 6 hours no issues so far, all the services I use are working. _________________ Asus RT-AC88U Donations
Joined: 04 Jan 2007 Posts: 11563 Location: Wherever the wind blows- North America
Posted: Mon May 08, 2023 23:57 Post subject:
Router 6300v2. 52459.
I had an issue where the GUI stopped responding. I could SSH into the router and after issuing a "startservice httpd" then things started working agian. Not sure why this happened. I can't see a reason for the httpd daemon stopping. The router continued to function with streaming and normal web functions during this time. Just the login was killed.
I'll keep monitoring it.
[EDIT] - sorry...forgot to enable syslog....if the issue comes back, I'll hopefully be able to capture the incident.
Upgraded all my routers yesterday. My gateway router lost internet connection last night and i need to reboot to get connection again this morning. It was still reachable via GUI. _________________ Asus AC-RT88U (Gateway, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT88U (AP, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT68U (AP, asus_rt-ac68u-firmware_52459.trx)
Asus AC-RT66U (AP, dd-wrt-52459-Asus_RT-AC66U.trx)
Linksys E3000 (AP, dd-wrt.v24-52459_NEWD-2_K3.x_mega-e3000.bin)
Linksys E4200 V2 (openwrt-18.06.5-kirkwood-linksys_viper-squashfs-sysupgrade.bin) not used at the moment