r40392 could be during a time certain things were 'broken'. Try via telnet/ssh:
Code:
cd /tmp
wget http://ftp.dd-wrt.com/dd-wrtv2/downloads/betas/2023/04-14-2023-r52330/tplink_tl-wr1043nd/tl-wr1043nd-webflash.bin
write tl-wr1043nd-webflash.bin linux &
OR
Code:
cd /tmp
wget -O firmware.bin http://ftp.dd-wrt.com/dd-wrtv2/downloads/betas/2023/04-14-2023-r52330/tplink_tl-wr1043nd/tl-wr1043nd-webflash.bin && tail -f /var/log/messages
If you get any kind of disconnection message from your telnet/ssh client, best advice is to wait ~20 minutes, then power cycle. _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
cd /tmp
wget http://ftp.dd-wrt.com/dd-wrtv2/downloads/betas/2023/04-14-2023-r52330/tplink_tl-wr1043nd/tl-wr1043nd-webflash.bin
write tl-wr1043nd-webflash.bin linux &
and wait about 2 3 minutes than put reboot in puttyand t nothing was changed
now i write these in putty
Code:
cd /tmp
wget -O firmware.bin http://ftp.dd-wrt.com/dd-wrtv2/downloads/betas/2023/04-14-2023-r52330/tplink_tl-wr1043nd/tl-wr1043nd-webflash.bin && tail -f /var/log/messages
how long i have to wait maximaly,is 60 minutes good?
the clock time is going and putty still write fivmwer
Joined: 16 Nov 2015 Posts: 6436 Location: UK, London, just across the river..
Posted: Sun May 07, 2023 8:16 Post subject:
If you do CLI flash (the one you do at the moment)
make sure your unit is not out of working ram (check with command top...as \tmp is in the ram, so once you download the file, make sure you have, at least 8-9MB free ram otherwise it will not flash or it will flash, but incomplete..
On my 1043v2 with 64 mb or ram i cannot do CLI flash, unless i download the flash file on the usb...(opt)..
If you cannot flash via WEB GUI or via CLI, than try TFTP it should work...if TFTP is not working..
than last resort is serial...flash...also you may consider that you flash chip is a bit smaller than the build, than try smaller, older builds...
I said somewhere in my posts to you, that 1043v1xx is not the best router to spend your money/time to...
You may find, that i was wright...soon..
slowmotionscene wrote:
did i should rename
Code:
Code:
cd /tmp
wget -O firmware.bin http://ftp.dd-wrt.com/dd-wrtv2/downloads/betas/2023/04-14-2023-r52330/tplink_tl-wr1043nd/tl-wr1043nd-webflash.bin && tail -f /var/log/messages
to
Code:
Code:
cd /tmp
wget -O tl-wr1043nd-webflash.bin http://ftp.dd-wrt.com/dd-wrtv2/downloads/betas/2023/04-14-2023-r52330/tplink_tl-wr1043nd/tl-wr1043nd-webflash.bin && tail -f /var/log/messages
Joined: 16 Nov 2015 Posts: 6436 Location: UK, London, just across the river..
Posted: Sun May 07, 2023 10:12 Post subject:
if it says image its too big for partition linux...
than as i said above find a smaller image that will fit..or your flash chip is broken and has a smaller than normal size due to bad blocks or something...
oversized images are common this days and have to be reported to the main developer in order to reduce their..size
That is the problem with old and obsolete units, that nobody uses and reports in the new build threads..if the firmware is too big it wont fit...check and compare their size and find a smaller
Im not gonna help you with this game, as its very time demanding and not my cup of tea...
1043v1 is an old router, with lots of delicate points and slow cpu and old hardware...
----happy head banging ---
lots of articles threads that dale_gribble39 pointed out ...read those and keep trying.. _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
root@DD-WRT:~# cd /tmp
root@DD-WRT:/tmp# write factory-to-ddwrt.bin linux &
root@DD-WRT:/tmp# factory-to-ddwrt.bin: Bad trx header
write factory-to-ddwrt.bin linux &
[1]- Done(255) write factory-to-ddwrt.bin linux
root@DD-WRT:/tmp# factory-to-ddwrt.bin: Bad trx header
Last edited by slowmotionscene on Sun May 07, 2023 11:22; edited 1 time in total
_________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
root@DD-WRT:~# cd /tmp
root@DD-WRT:/tmp# write tl-wr1043nd-webflash.bin linux &
root@DD-WRT:/tmp# Image too big for partition: linux
linux: Invalid argument
when i try with factory to ddwrt bin says bad trx header , but webflash says its too big