Posted: Fri May 05, 2023 10:00 Post subject: BROKEN New Build - 05/05/2023 - r52432
This build seems broken as in no IPv4 traffic passing from LAN <> WAN
Welcome to Atheros r52432 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Linksys EA8500...main gateway
DD-WRT v3.0-r52432 std (05/05/23)
Linux 4.9.337 #1842 SMP Fri May 5 03:38:08 +07 2023 armv7l
GUI install over r52369
up --> 3:10
all good
#
Netgear WNDR3700 V4
DD-WRT v3.0-r52432 std (05/05/23)
Linux 3.18.140-d6 #170824 Fri May 5 07:35:47 +06 2023 mips
GUI install over r52369
WAP + guestNET + OVPN server
up --> 3:17
all good
Joined: 16 Nov 2015 Posts: 6177 Location: UK, London, just across the river..
Posted: Fri May 05, 2023 10:27 Post subject:
I had no success with R7800 ... 52411 or (even 52369) > 52432 R7800 went "numb" (no reset)
I had:
GUI and SSh access...
there was correct NTP time
there was wget and curl working...
but no connectivity......
reverted to 52369
I haven't tried reset and manual recompile of 52432 as this is a heavy load unit...no time for it atm sorry..will pass for now _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 53045 WAP
TP-Link WR1043NDv2 -DD-WRT 54248 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall,VPN,x1VLAN
TP-Link WR1043NDv2 -DD-WRT 54079 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 54248 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 54079 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 54079 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Fri May 05, 2023 10:47; edited 1 time in total
I did a quick test with my R7800 going from 52411 to 52432.
I had no time to diagnose but internet was not working properly it looked like I only had IPv6 and no IPv4.
I reverted to 52242 the build which was stable for me and had an uptime over 4 weeks.
Maybe it was just my router or whatever but I have no time the coming days to look at it.
I got the same results on my XR500. Rolling back to 52369...... _________________ Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridges(s)
Netgear R6400v2otp
Linksys EA8500
GUI upgrade from r52411, no reset.
Update went sucessfully, but no internet access.
Restarted router, still no internet.
I reverted to r52369 (r52411 was removed) - internet worked again. _________________ ------------------------------------
Netgear XR500 DD-WRT r54248 (Gateway)
Linksys EA8500 openwrt-23.05.2 r23630 (Wired AP)
Linksys WRT3200ACM DD-WRT r54248 (spare Wired AP)
Netgear WNDR3700v4 DD-WRT r54203 (spare Gateway)
Photos: https://www.flickr.com/photos/nickant44/albums
I tried r52432. It installed and seemed to work but DNS connections began to fail after about 5 minutes. LAN side seemed fine, WAN side unusable. Rolled back to r52369 and all is normal. _________________ Netgear R9000
DD-WRT v3.0-r54248 std (11/29/23)
Linux 4.9.337 #686 SMP Wed Nov 29 03:14:52 +07 2023 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Fri May 05, 2023 13:56 Post subject: New Build - 05/05/2023 - r52432
Router: Tp-Link TL-WDR3600 v 1.5
File/Kernel: Official build r52432 for my device
Previous/Reset: r52369 and flash r52432 on it and back to r52369 cause router won't work. I'm not try restore factory defaults. I haven't time to make fresh configuration.
Mode: On this build GUI, SSH, DNS, WAN port can work, internet connections won't working on neither interfaces.
Errors: Internet connections can't work and back to r52369 build.
Yesterday I'm installed build r52411 (actually unavailable). On this build router was worked good. Today after information about erased build from May 4 I'm back to build r52369 and flash r52342. On the newest build internet connections totally can't work. Services working on device, but I can't make any internet connections on my workstations. Wireless connections won't working too. PC can't open internet sources and can't ping external hosts. Router on WAN port correctly establish connections with internet. On ssh I can check this. All network interfaces are up and can ping hosts, traceroute etc. It's some problem with LAN and WIFI connections. For tests I'm totally erase firewall rules and security options on GUI, but it not solve problem. Actually I'm rollback to r52369 build and all features works. I'm attach syslog of r52432 build.
Joined: 03 Nov 2015 Posts: 313 Location: Florida, USA
Posted: Fri May 05, 2023 14:08 Post subject:
Router:Linksys ea8500 AP
Upgraded yesterday to r52411 before it was pulled and it was working. Upgraded today to r52432 and was unable to hit any sites. After several reboots I gave up and went back to r52330 where I been for 20 days on all (3) ea8500s with no reboots or problems. Thanks for the effort, but try again. _________________ ......All GOOD here... Just Handshakes and Time Stamps !......
Just found out can't go anywhere connected to other ea8500 ovpn server or the wndr3700v4 ovpn server
Works really great connected to main ea8500 ovpn server.
I'll have closer looksee when get back to homeworld 🙃
some weird juju WNDR3700v4 WAP:
its OVPN server can't get any DNS
wireless clients connected to its guest net br1 2.4 VAP connect fine but get NO DNS
install r52369 back and all good again...
other EA8500 can't get DNS connected to its OVPN server ...booted back into r52369 all is good now.
----****----****----****----
main gateway EA8500 still on r52432
all her goodies worky just great
Even with R9000 (aka X10) cannot surf.
Reverted to yesterday's r52411 (which has been removed from server) but seems quite stable _________________ Netgear R9000+Draytek 2865 as bridge modem
MikroTik hAP AC as backup or portable
