Did someone tested wr1043v1 on new builds that so far work good? Can some one tell me what build is without erros so far? At least for 1 month later that these date now.
Joined: 16 Nov 2015 Posts: 6446 Location: UK, London, just across the river..
Posted: Sat Apr 29, 2023 8:03 Post subject:
slowmotionscene wrote:
Did someone tested wr1043v1 on new builds that so far work good? Can some one tell me what build is without erros so far? At least for 1 month later that these date now.
no reports on it so far...if you know how to recover it, you can always try the last builds...
but it not very stable or good specs router to recommend...
Cheap its not always good..
as well how this question is related to this thread... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Did someone tested wr1043v1 on new builds that so far work good? Can some one tell me what build is without erros so far? At least for 1 month later that these date now.
no reports on it so far...if you know how to recover it, you can always try the last builds...
but it not very stable or good specs router to recommend...
Cheap its not always good..
as well how this question is related to this thread...
I was searching in last 5 6 builds on atheros soc sub forum , i didn found that samoneone is says build works ok for wr1043v1 just for v2 but i need for version1 wr1043
Can you tell me who i latests says it work tested ok for wr1043 v1 or someone who readed that
If your TL-WR1043ND is a v1.8, it should have the standard TP-Link TFTP recovery. Sorry if I don't champion the effort to report on this device in every build thread. I sometimes tend to be a lazy bitch. It takes a village, not a single user always doing the work.
Just that to mention i dont want to be ready for the standard TP-Link TFTP recovery.
Rather i will want to be for use and rack,well thats reason why i use wifi routers only.
I use now build from 2016 v3.0-r29974 std (06/20/16)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2016/06-20-2016-r29974/tplink_tl-wr1043nd/
,newer versions have weak usb and wifi support, older versions are stabile very much more than newer.I first used version from 2013 and didnt support ntfs than install build from 2016 v3.0-r29974 std (06/20/16) all works just fine.
No errors no reboots no nothing bad
So far i got 3 hour running with pc on wifi and on usb hard disc,acces on both are good.
Joined: 16 Nov 2015 Posts: 6446 Location: UK, London, just across the river..
Posted: Thu May 04, 2023 19:48 Post subject:
builds from 2016 contain:
-lots of bugs
-lots of unpatched stuff
-lots of security holes
Not very recommended..
In fact...
-This thread has nothing common with your issue, but you just hijacked it..and keep posting..
-If you want to find, if your router will run the last build, you rather update and learn how to TFTP recover your unit, so you can help developer to report any issues and developer will be able to address those in order to make your build stable...
-as nobody reports or run this router like yours you are left with those options...
-also as dale_gribble39 noted TFTP recovery option is available...so its not a rocket science..
-ntfs is not native linux file system, but DDWRT is linux based, so do not expect ntfs super performance..although it is supported, its recommended to use ext2, 3 or 4 formats...
-please start a new thread, with your router model and your issues, but do not hijack this thread again..
-if you update, reset and rebuild your settings manually ...do not use save file from a different builds !!! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
I guess there is a language barrier that prevents the obvious message to be inferred from my previous comment. One same device with 52330 has been up since release, the other same device with 52369 has been up since release. But please, continue using a release with known unpatched CVEs. _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
I know its not nice to recommend firmver who is old 8 yeuars.But untill today i was thinking that wr1043 v1 cant work in mode wifi and nas(hard disc on sata usb cable) and work all two days great.Thank you Alozaros for advices with backup.
Same think with reboot when use lot wifi and hdd in same time was and with fabrick tplik firmver when i get out of box router, i was thinking i never made good i was trying long on openwrt that and nothing, untill am founded some research here on wr1043v1 from 2013 build, and that buld was too old even for me so i thinked to go 2 3 years up and i get lucky am glad i can help someone with these.
I know i goes little rude but i finally found one build who works truely perfect.Today 8 9 hours 2 pc on wifi no erros no pc no router.I was today accesing on samba it was ok.Plus transfering was almost 2mbps , it was 1,9 mbps and wifi all goes great.I Buyed one more 1.8v wr1043v1 tested yesterday for 2 3 hours looks ok.But on these am on wifi all day.
Can developers take these codes or what from these build , i miss only two things klog, and inspirated themes.All others is ok.
If you're not flashing and reporting in build release threads and giving us clear, definite steps to reproduce the problem, then what is/are the developer(s) going to do? Nothing. Again, obvious language barrier that is making this discussion really painful. This is yet another topic (the other started by denik) about the same exact thing for the same exact reason(s).
I have not flashed today's release on anything, probably won't happen today. Again, sorry if I'm not posting up flash reports for the rest of you who don't wish to contribute.
EDIT: looking at 52432 build thread, probably going to pass on that one unless I feel like contributing to figuring out what broke <wink>
Thanks to all build thread reports, and @hvanderkruijf (Henry) investigation, IPv4 iptables issue is nDPI (xt_ndpi).
So as a temporary solution or workaround anyone using r52432 can add "modprobe xt_ndpi" to the startup script.
am glad i can help someone with these.
and wifi all goes great.I Buyed one more 1.8v wr1043v1 tested yesterday for 2 3 hours looks ok.But on these am on wifi all day.
