New Build - 04/20/2023 - r52369

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3, 4, 5  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5630

PostPosted: Thu Apr 20, 2023 4:39    Post subject: New Build - 04/20/2023 - r52369 Reply with quote
Welcome to Atheros r52369 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.


CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 52330 (mirror)

OpenVPN 2.6.3: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
mDNS/Avahi ~2023 MS GH Zstd Zabbix mwlwifi sysinit swconfig nDPI zfs Plex mtd overlap inadyn musl northstar frr driver
In-kernel SMB (ksmbd/tools 3.4.6/3.4.5): guest user is selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
Bad blocks handling has been reworked again: R7800, XR450, XR500, IPQ based device w/ defective NAND, boot loops etc.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6350
Location: UK, London, just across the river..

PostPosted: Thu Apr 20, 2023 9:24    Post subject: Reply with quote
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r52369 std (04/20/23)
Kernel Version Linux 4.9.337 #1812 SMP Thu Apr 20 00:46:29 +07 2023 armv7l

update: CLI r52330 > r52369
reset: NO
mode: Gateway
status: Operational 3h+
errors: Nothing new, yet...

Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r52369 std (04/20/23)
Kernel Version Linux 3.18.140-d6 #169616 Thu Apr 20 04:25:39 +06 2023 mips

update: GUI r52330 > r52369
reset: NO
mode: Gateway
status: Operational 3h+
errors: Nothing new, yet...

All Working ok so far...running stuff from my signature...!
Thanks BS and devs !

P.S.

Router Model Netgear R9000 Nighthawk X10
Firmware Version DD-WRT v3.0-r52369 std (04/20/23)
Kernel Version Linux 4.9.337 #665 SMP Sun Mar 26 02:43:53 +07 2023 armv7l

update: CLI r52242 > r52369
reset: NO
mode: Gateway
status: Operational 12h+
errors: Nothing new, yet...

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55179 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall
TP-Link WR1043NDv2 -DD-WRT 55179 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 55179 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55179 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55109 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913


Last edited by Alozaros on Sat Apr 29, 2023 11:00; edited 1 time in total
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 939

PostPosted: Thu Apr 20, 2023 12:36    Post subject: Reply with quote
Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r52369) / Linux 4.9.337 #1812 SMP Thu Apr 20 00:46:29 +07 2023 armv7l
Previous/Reset: DD-WRT v3.0-r52330 std (04/14/23) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 20MHz, 802.11r (FT), SSH (public key), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), CIFS Automount, WireGuard server, Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1002

PostPosted: Thu Apr 20, 2023 12:40    Post subject: Reply with quote
Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r52369 std (04/20/23)
Previous/Reset: DD-WRT v3.0-r52330 std (04/14/23) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: None

_________________
Netgear R9000
DD-WRT v3.0-r55209 std (02/27/24)
Linux 4.9.337 #713 SMP Fri Feb 2 04:37:42 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
nyddwrtuser330
DD-WRT User


Joined: 05 Mar 2018
Posts: 209

PostPosted: Thu Apr 20, 2023 13:25    Post subject: Reply with quote
R9000
Reset=no
previous:52330
Services: Inadyn,QOS,SMB,Vanilla,Gateway, DNSMASQ, DHCP, WDSAP(5GHz 80, channel 149UU, USA), Guest Isolated network on 2.4
Errors: NONE- works nicely

R7800
Previous:51589
reset=no

Services WDS STA 5ghz, VAP 5.0 GHZ, 2.4GHZ
Issues / Errors, rolled back to 51589, - https://svn.dd-wrt.com/ticket/7669 appears to still apply
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12795
Location: Netherlands

PostPosted: Thu Apr 20, 2023 13:28    Post subject: Reply with quote
Router Model: Linksys EA8500

Firmware Version: DD-WRT v3.0-r52369M Community Build by EGC (04/20/23)

Upgraded from: DD-WRT v3.0-r52330M Community Build by EGC (04/15/23)
Reset: No not this time

Status: Up and running for 4 hours, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz switched off, OpenVPN server working, WireGuard Server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location), NAS and Samba working, Avahi and Avahi-utils working.
IPv6 working.

Errors: Nothing encountered at this moment

Big Thanks to the devs!!

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
ArjenR49
DD-WRT Guru


Joined: 05 Oct 2008
Posts: 661
Location: Helsinki, Finland / nr. Alkmaar, Netherlands

PostPosted: Thu Apr 20, 2023 15:36    Post subject: Reply with quote
R7800:
upgrade from 52306 to 52330 some days ago already stopped the router from giving out IP to my laptop thus loosing control.

Downgraded to 52306 until next version 52369 today. Upgrade without reset.
Still no IP to my laptop.

Erased nvram and entered all settings from scratch (GUI prints).

Then I figured I could set laptop IP and dns manually. This regained me control of the router.
It still wouldn't work as usual, as if the Reserved IPs file on /jffs wasn't having any effect and hostnames were just * and failing internet access. The file was there alright.

After much checking of the settings making just minor corrections in text fields (some broken lines), I eventually downgraded to build 52306 once more. I kept the settings as I had re-entered them for 52369 and .... router works again ....
So, both the set of settings kept through upgrades and the settings re-entered today fail to work (for me) on 52330 and 52369.

I have used a local DNS server PiHole on a Raspberry Pi for a long time without problems. I haven't changed anything there. Just rebooted it a few times today while working on the router settings (controlled shutdown button on its UPS).

To me it looks like something has changed with respect to DNS in the last two builds.
At least in as far as my settings are concerned ...

Any ideas?
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2856
Location: Germany

PostPosted: Thu Apr 20, 2023 16:03    Post subject: Reply with quote
First DHCP then DNS - which of these does not work?
In the other thread several have written that they have no problems.

If others have no problems then you should reset the router and find the setting that causes problems.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12795
Location: Netherlands

PostPosted: Thu Apr 20, 2023 16:07    Post subject: Reply with quote
Static lease file on jffs (conf-file=/jffs/staticleas-file) ?

If DNSMasq cannot find that on startup DNSMasq will refuse to start, syslog will show that.

If jffs is on USB stick it will probably fail if you use JFFS2 it might or might not work.

Bottom line not a good idea.

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087


Last edited by egc on Thu Apr 20, 2023 16:13; edited 1 time in total
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6259
Location: Texas

PostPosted: Thu Apr 20, 2023 16:12    Post subject: Reply with quote
Linksys EA8500 ...main gateway
DD-WRT v3.0-r52369 std (04/20/23)
Linux 4.9.337 #1810 SMP Thu Apr 20 00:25:56 +07 2023 armv7l
scp 'firmware.bin' install over r52330

her OVPN server is all good -- OpenVPN 2.6.3
all is worky good but NOT sure 'bout this invalid size mess
Code:
root@Citadel-Station-Homeworld:~# dmesg|tail -30
[   56.177836] EXT4-fs (sda1): barriers disabled
[   56.194904] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[   57.172234] Linux kernel CIFS/SMB SERVER 3.4.6 by Namjae Jeon <linkinjeon@kernel.org>
[   57.489079] br1: port 1(wlan1.1) entered learning state
[   58.506260] IMQ: use 2 as queue number
[   58.543891] IMQ driver loaded successfully. (numdevs = 16, numqueues = 2, imq_dev_accurate_stats = 1)
[   58.543917]    Hooking IMQ after NAT on PREROUTING.
[   58.552194]    Hooking IMQ before NAT on POSTROUTING.
[   59.125052] x_tables: ip_tables: ndpi.0 match: invalid size 264 (kernel) != (user) 256
[   59.143842] x_tables: ip_tables: ndpi.0 match: invalid size 264 (kernel) != (user) 256
[   59.162591] x_tables: ip_tables: ndpi.0 match: invalid size 264 (kernel) != (user) 256
[   59.181624] x_tables: ip_tables: ndpi.0 match: invalid size 264 (kernel) != (user) 256
[   59.200370] x_tables: ip_tables: ndpi.0 match: invalid size 264 (kernel) != (user) 256
[   59.247393] x_tables: ip_tables: ndpi.0 match: invalid size 264 (kernel) != (user) 256
[   59.928411] IMQ driver unloaded successfully.
[   61.489359] br1: port 2(wlan0.1) entered learning state
[   62.103095] IMQ: use 2 as queue number
[   62.113001] IMQ driver loaded successfully. (numdevs = 16, numqueues = 2, imq_dev_accurate_stats = 1)
[   62.113028]    Hooking IMQ after NAT on PREROUTING.
[   62.121354]    Hooking IMQ before NAT on POSTROUTING.
[   62.638095] x_tables: ip_tables: ndpi.0 match: invalid size 264 (kernel) != (user) 256
[   62.655726] x_tables: ip_tables: ndpi.0 match: invalid size 264 (kernel) != (user) 256
[   62.673577] x_tables: ip_tables: ndpi.0 match: invalid size 264 (kernel) != (user) 256
[   62.691488] x_tables: ip_tables: ndpi.0 match: invalid size 264 (kernel) != (user) 256
[   62.710520] x_tables: ip_tables: ndpi.0 match: invalid size 264 (kernel) != (user) 256
[   62.754336] x_tables: ip_tables: ndpi.0 match: invalid size 264 (kernel) != (user) 256
[   72.490127] br1: port 1(wlan1.1) entered forwarding state
[   73.490310] br1: port 3(eth1.4) entered learning state
[   76.489438] br1: port 2(wlan0.1) entered forwarding state
[   88.489797] br1: port 3(eth1.4) entered forwarding state
root@Citadel-Station-Homeworld:~# uptime && date
 11:07:01 up 11 min,  load average: 0.00, 0.04, 0.06
Thu Apr 20 11:07:01 CDT 2023
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1002

PostPosted: Thu Apr 20, 2023 16:12    Post subject: Reply with quote
egc wrote:
Static lease file on jffs (conf-file=/jffs/staticleas-file) ?


Don't do this. I did a few years ago and it is asking for trouble. I had very similar issues as you and the logs showed a mess. Been there, got the scars, learned my lesson. Smile

_________________
Netgear R9000
DD-WRT v3.0-r55209 std (02/27/24)
Linux 4.9.337 #713 SMP Fri Feb 2 04:37:42 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2856
Location: Germany

PostPosted: Thu Apr 20, 2023 16:14    Post subject: Reply with quote
@mrjcd

I have also seen that this was already present in the last builds.
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6259
Location: Texas

PostPosted: Thu Apr 20, 2023 16:17    Post subject: Reply with quote
ho1Aetoo wrote:
@mrjcd

I have also seen that this was already present in the last builds.

yeahuh seen it before but don't remember anyone saying what's what Surprised
ArjenR49
DD-WRT Guru


Joined: 05 Oct 2008
Posts: 661
Location: Helsinki, Finland / nr. Alkmaar, Netherlands

PostPosted: Thu Apr 20, 2023 16:28    Post subject: Reply with quote
Sorry, the problem looks like it originates from DHCP.
However, if DHCP doesn't work as intended, a client gets an IP which I don't recognize and DNS won't work either, because the PiHole is advertised as DNS server by its intended IP ...

My PiHole DNS server is set up to not do DHCP.
In my current setup DHCP is taken care of by the router itself. Maybe I should rethink that.

All 'permanent' clients have their IP and hostname listed by MAC in file /jffs/Reserved_IPs.custom.
(The PiHole does have its own list of hostnames by IP, but that's for local DNS purposes.)

When re-entering the router settings, I mostly did them page by page without much rebooting and only left some pages like QoS, networking and wireless for later after first testing. Obviously I need to use a more systematic approach ...

My reason for re-entering settings was to do away with possible 'gremlins', which are so often referred to. I take them to be obsolete nvram variables. I did not immediately expect my settings as such to be at fault since they had been working w/o problems for many builds in sequence, but there's obviously no other way to find out the cause than by re-entering settings a little at a time and check when the router starts to disagree ...


Last edited by ArjenR49 on Thu Apr 20, 2023 16:38; edited 1 time in total
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1002

PostPosted: Thu Apr 20, 2023 16:32    Post subject: Reply with quote
ArjenR49 wrote:
All 'permanent' clients have their IP and hostname listed by MAC in file /jffs/Reserved_IPs.custom.


This is asking for trouble if you are using NVRAM for the Client Lease DB.

_________________
Netgear R9000
DD-WRT v3.0-r55209 std (02/27/24)
Linux 4.9.337 #713 SMP Fri Feb 2 04:37:42 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
Goto page 1, 2, 3, 4, 5  Next Display posts from previous:    Page 1 of 5
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum