Posted: Sat Apr 15, 2023 16:30 Post subject: New Build - 04/14/2023 - r52330
Welcome to Atheros r52330 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #169444 Fri Apr 14 15:41:30 +06 2023 mips
Previous/Reset: r52306 / no
Mode/Status: AP wired and wireless / Up and running for 1:10 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55779
Broadcom
Asus RT-AC87U R - DD-WRT 55819
Asus RT-N66U - DD-WRT 55779
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Router/Version: R7800
File/Kernel: Linux 4.9.337 #1803 SMP Fri Apr 14 13:09:45 +07 2023 armv7l
Previous/Reset: r52316 / no
Mode/Status: Gateway / working
Services Used: PPPoE,DHCP,DHCP-Reservation,Dnsmasq + PiHole,DDNS,SSH ed25519,WiFi 2,4Ghz + 5Ghz AP's + VAP's Vanilla,USB,Port forwarding,QoS
Issues/Errors: nothing so far
A small hint
The HT40 channels are now properly filtered.
If you want to use a different combination of channel and extension channel then you have to activate "allow channel overlapping".
Last edited by ho1Aetoo on Sat Apr 15, 2023 20:15; edited 2 times in total
Thank you very much BS and team and all the good people who help at the forum. _________________ TP-LINK Archer C7 v5 Wireless Access Point
TP-LINK TL-WR1043ND v2 Wireless Access Point
Joined: 25 Dec 2020 Posts: 90 Location: Toronto - Canada
Posted: Sun Apr 16, 2023 7:07 Post subject:
Netgear R7800 Firmware Version DD-WRT v3.0-r52330 std (04/14/23)
Kernel Version Linux 4.9.337 #1803 SMP Fri Apr 14 13:09:45 +07 2023 armv7l
Upgrade Method HTTPS via Web GUI
Previous Build/Reset r52306/NO
Up Time 1.5 hour
Configuration Type Gateway
WAN DHCP. LAN/wlan0 5Ghz vanilla VHT80+80 br0 with AP Mesh attached. Wlan0.1 Isolated AP Isolated network with FW rule(s) to wlan1 resource(s). Wlan1 2.4Ghz Vanilla 20/40 without Masquerade/NAT. Wlan1.1 Isolated AP and Isolated network. All clients with static leases x4 DHCP. MAC Filtering. Time restrictions. Ignore WAN DNS with static DNS servers, DNSMASQ, cached DNSSEC, Validate DNSSEC replies, no DNS rebind, Query DNS strict order. WPA 3 and WPA 2. Syslogd to FS on br0 LAN. Cooling fan USB attached. WAN traffic counter.
Everything is 100% functional. Thanks BS and team!
Joined: 18 Mar 2014 Posts: 12881 Location: Netherlands
Posted: Sun Apr 16, 2023 7:42 Post subject:
Router Model: Linksys EA8500
Firmware Version: DD-WRT v3.0-r52330M Community Build by EGC (04/15/23)
Upgraded from: DD-WRT v3.0-r52189M Community Build by EGC (03/28/23)
Reset: No not this time
Status: Up and running for 4 hours, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz switched off, OpenVPN server working, WireGuard Server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location), NAS and Samba working, Avahi and Avahi-utils working.
IPv6 working.
Posted: Sun Apr 16, 2023 9:49 Post subject: DIR-825B
Up to now my setting was Channel Width HT40, Channel 136, Extension Channel Upper.
Now with Channel 136 only Lower is possible -> collision with radar; with Channel 140 only Upper is possible; don't know whether all my devices can use. I would prefer 136 Upper or 140 Lower.
Stepped back to FW 52242 and Channel Width HT40, Channel 136, Extension Channel Upper.
ervau
The HT40 channels are now properly filtered.
If you want to use a different combination of channel and extension channel then you have to activate "allow channel overlapping".
....
be warned that channels 136+U or 140+L break client compatibility.
and read next time before you post any non-existent problems
