Posted: Sun Apr 02, 2023 5:45 Post subject: New Build - 04/02/2023 - r52217
Welcome to Atheros r52217 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: R7800
File/Kernel: Linux 4.9.337 #1756 SMP Sat Apr 1 18:25:14 +07 2023 armv7l
Previous/Reset: r52189 / no
Mode/Status: Gateway / working up since 15h
Services Used: PPPoE,DHCP,DHCP-Reservation,Dnsmasq + PiHole,DDNS,SSH ed25519,WiFi 2,4Ghz + 5Ghz AP's + VAP's Vanilla,USB,Port forwarding,QoS
Issues/Errors: some VHT160 channels still a bit broken
Joined: 16 Nov 2015 Posts: 6410 Location: UK, London, just across the river..
Posted: Sun Apr 02, 2023 9:00 Post subject:
Router Model TP-Link TL-WR740N
Firmware Version DD-WRT v3.0-r52217 std (04/02/23)
Kernel Version Linux 3.10.108-d11 #130062 Sun Apr 2 05:10:29 +06 2023 mips
Router Model Netgear R9000 Nighthawk X10
Firmware Version DD-WRT v3.0-r52217 std (04/02/23)
Kernel Version Linux 4.9.337 #665 SMP Sun Mar 26 02:43:53 +07 2023 armv7l
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r52217 std (04/02/23)
Kernel Version Linux 3.18.140-d6 #168222 Sun Apr 2 05:58:33 +06 2023 mips
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r52217 std (04/02/23)
Kernel Version Linux 4.9.337 #1759 SMP Sun Apr 2 03:10:02 +07 2023 armv7l
update: CLI r52189 > r52217
reset: NO/YES
mode: Gateway
status: Operational 3h+
errors: Nothing new, yet...I will reset and manually recompile R7800 in order to test the new VLAN switch tab will report and update later...
So, far all units are operational, without reset...Thanks BS and team !
p.s. I did the reset and manually recompile R7800 settings...
I was hoping to use the LANCPU port on the VLAN's and WANCPU port on the WAN...
so, on 52217 i did a reset and made all settings including all those br and vlans and used the LANCPU on the VLAN's, but...those VLAN's do not appear on the networking tab, where is assign to bridge section...nor anywhere...until I clicked on switch tab LANCPU port tag
So, if i tag the LANCPU port all those vlans over the LANCPUport appear in the networking tab...and can be assigned to bridges, WANCPU remains untagged and only for the WAN....so, i guess this is the correct way of doing the VLAN segmentation and using the x2 CPU PORTS !
Thanks for all the hard work BS and team, i believe in Unicorns now
so, the next Unicorn will be to put the R7800's NSS cores in action
Errors: IGMP Snooping box's are all ticked, but output of swconfig dev switch0 show shows IGMP snooping 0 _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Sun Apr 02, 2023 12:04; edited 4 times in total
Linksys EA8500...main gateway
DD-WRT v3.0-r52217 std (04/02/23)
Linux 4.9.337 #1757 SMP Sun Apr 2 02:49:19 +07 2023 armv7l
scp 'firmware.bin' over r52189
all ok
Joined: 21 Aug 2019 Posts: 120 Location: Here, There And Everywhere
Posted: Sun Apr 02, 2023 20:30 Post subject:
Router/Version: Netgear XR500
File/Kernel: DD-WRT v3.0-r52217 std (04/02/23) / Linux 4.9.337 #1759 SMP Sun Apr 2 03:10:02 +07 2023 armv7l
Previous/Reset: DD-WRT v3.0-r52189 std (03/28/23) / No
Mode/Status: WDS Station, VAP, USB / Works (mostly)
Issues/Errors: Minor problems with VHT160 as backhaul - clients will connect to WDS Station only as HT20. This is, however, nothing new, I observed it in 52189 as well. With VHT80, everything works.
Joined: 21 Aug 2019 Posts: 120 Location: Here, There And Everywhere
Posted: Mon Apr 03, 2023 9:22 Post subject:
Router/Version: TP-Link ARCHER-C7 v5
File/Kernel: DD-WRT v3.0-r52217 std (04/02/23) / Linux 3.18.140-d6 #168232 Sun Apr 2 06:16:20 +06 2023 mips
Previous/Reset: r52189 / No
Mode/Status: WDS Station, VAP, USB / Working
Issues/Errors: Works as expected, only 5 GHz signal strength, as shown on the WDS AP, seems less than a few versions ago (DD-WRT firmware, max TX).
Router/Version: Netgear XR500
Update method:WebUpgrade
File/Kernel: dd-wrt-webupgrade.bin / Linux 4.9.337 #1759 SMP Sun Apr 2 03:10:02 +07 2023 armv7l
Previous/Reset: r52189 / no
Mode/Status: Gateway / Up and running for 7:42 hours
Issues/Errors: Nothing significant
____________________________________________________________________________________________
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade / TFTP
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #168208 Sun Apr 2 05:42:35 +06 2023 mips
Previous/Reset: r52189 / yes
Mode/Status: AP wired and wireless / Up and running for 7:31 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Through Wi-fi WebUpgrade - immured.
Successfully flashed via TFTP
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55303
Broadcom
Asus RT-AC87U R - DD-WRT 55460
Asus RT-N66U - DD-WRT 55460
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r52217 std (04/02/23)
Kernel Version: Linux 4.9.337 #1759 SMP Sun Apr 2 03:10:02 +07 2023 armv7l
Previous/Reset: r52054 -> r52148 / No, CLI Update-> reboot & Power Cycle
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx via Startup,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: 2.4 & 5Ghz Radios,QoS,ttraff,SFE,Telnet,NAS,Samba,YAMon3.4.6,VLAN GUI
Home Main AP Router
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r52217 std (04/02/23)
Kernel Version: Linux 4.9.337 #1759 SMP Sun Apr 2 03:10:02 +07 2023 armv7l
Previous/Reset: ]r52189 / No, CLI Update-> reboot & Power Cycle
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: none / none
Services Used: 2.4 & 5Ghz Radios,Static WAN,IPv6-6to4,WiFi DD-WRT,NTP,2xWG Clients,VAPx,VLANx via Startup,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: SPI,QoS,ttraff,SFE,Telnet,NAS,Samba,VLAN GUI
Fixed: 5Ghz LED is Working since r51887!
Both running for over 32 hours.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531