New Build - 03/28/2023 - r52189

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Tue Mar 28, 2023 13:43    Post subject: New Build - 03/28/2023 - r52189 Reply with quote
Welcome to Broadcom r52189 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.


CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 52148 (mirror)

OpenVPN 2.6.1: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
mDNS/Avahi ~2023 ossl syslog FW tc MC pppd K nDPI ZFS Plex K IPQ XMSN WG swconfig inadyn hostapd mwlwifi swconfig
In-kernel SMB (ksmbd/tools 3.4.6/3.4.5): guest user is selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Tue Mar 28, 2023 13:45    Post subject: Reply with quote
Router Model: Linksys EA6900 (XVortex CFE)

Firmware Version: DD-WRT v3.0-r52189M Community Build (03/28/23)
Kernel Version: Linux 4.4.302-st38 #1 SMP Tue Mar 28 12:30:20 CEST 2023 armv7l

Upgraded from DD-WRT v3.0-r52095M Community Build (03/23/23) via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)

Reset: No not this time.

Configuration: Default gateway mode, 2,4GHz wireless running with unbridged VAP, 5GHz running, some static leases and some port range forwarding.
WireGuard client running with PBR.
OpenVPN client with PBR running.
IPv6 working.
NAS and ksmbd working.
NVRAM size 47K (NVRAM size should not be a problem with the Xvortex CFE)

Status: Up and stable for 4 hours

Errors: none so far

Thanks BS!!

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
jrscs
DD-WRT User


Joined: 09 Aug 2010
Posts: 413

PostPosted: Tue Mar 28, 2023 15:35    Post subject: Reply with quote
Router/Version: Asus RT-AC87U A1
Firmware: DD-WRT v3.0-r52189 std (03/28/23)
Kernel: Linux 4.4.302-st38 #9023 SMP Tue Mar 28 12:09:13 +06 2023 armv7l
Previous: DD-WRT v3.0-r52148 std (03/26/23)
Update Method: SSH / CLI using PuTTY
Mode/Status: Gateway / Ok
Reset: No
Setup Using: 2.4 GHz, 2.4 GHz guest (VAP), 5.0 GHz, IPv4, DHCP, DDNS (ddns custom eNom.com & ddns2 Dynu.com), DNSMasq, Static Leases, Port Forwarding, USB jffs mounted Ext4, NTP Client, Wireguard Server, and Wake-on-WAN (internet)
Issues/Errors: None / Ok

_________________
Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridge
Netgear R6400v2otp
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Tue Mar 28, 2023 16:34    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r52189) / Linux 4.4.302-st38 #9014 SMP Tue Mar 28 11:03:47 +06 2023 armv7l
Previous/Reset: DD-WRT v3.0-r52148 std (03/26/23) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + SSH (public key) + DDNS (Dynu.com) + USB Storage (guide by egc) + WireGuard server + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 2029

PostPosted: Tue Mar 28, 2023 20:06    Post subject: Reply with quote
R6200V2 WLAN Repeater
BCM47081A0 @800 BCM4360 & BCM43217

DD-WRT v3.0-r52189 std (03/28/23)
Linux 4.4.302-st38 #9014 SMP Tue Mar 28 11:03:47 +06 2023 armv7l

TFPT R6250.chk upgrade
No Reset

wl0 WLAN Repeater, wl1 AP, wl1.1 unbridged VAP, static leases
Overclocked 880 MHz

All Good

_________________
Forum Guide Lines (with helpful pointers about how to research your router, where and what firmware to download, where and how to post and many other helpful tips!)
How to get help the right way

Before asking for help - Read the forum guidelines AND Upgrade DD-WRT!
Adblock by eibgrad + Blocklist Collection
wabe
DD-WRT Guru


Joined: 17 Jun 2006
Posts: 889

PostPosted: Wed Mar 29, 2023 6:22    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r52189 std (03/28/23)
Kernel: Linux 4.4.302-st38 #9023 SMP Tue Mar 28 12:09:13 +06 2023 armv7l
Previous: DD-WRT v3.0-r52020
Update Method: SSH / CLI using PuTTY
Mode/Status: Gateway / Ok
Reset: No
Setup including: 2.4 GHz, 2.4 GHz guest (VAP), 5.0 GHz, Smartdns and Wireguard
Issues/Errors: None / Ok

_________________
Netgear R7000 on Build 55109
Asus AC-AC68U rev. C1 (AP) on Build 55109
Asus AC-68U rev. A1 on Build 54604
Asus AC-68U rev. A1 on Build 53339
ZenInTexas
DD-WRT Novice


Joined: 11 Aug 2020
Posts: 47

PostPosted: Wed Mar 29, 2023 23:10    Post subject: Reply with quote
Router/Version: Linksys EA6700/V1
File/Kernel: upgrade.cgi linksys-ea6700-webflash.bin/Linux 4.4.302-st38 #9014 SMP Tue Mar 28 11:03:47 +06 2023 armv7l
Previous/Reset: r51440/Yes
Mode/Status: static WAN IP, router, OpenVPN, SSH, syslog, wl0, wl1, VLAN isolation, dnsmasq/working
Issues/Errors: Yes/None

Running +15hours.

Initially I upgraded without doing a reset. That failed because the Switch Config was disabled initially after upgrade; The GUI did a few strange things, which I did not capture in the upgrade without reset attempt...I just thought I would mention it. After enabling Vlans on the Switch Config page and applying, I could no longer access the router.

I used the CFE mini browser to do an nvram clear and reboot. And started configuring everything by hand; the first thing I did was mess with the Switch Config tab...And I saw some dynamic stuff happen...

The Switch Config page confused me, as it kept changing while attempting to work with it. It was disabled but visible, then enabled & Visible...I had to disable it, reboot & enable to "restore" it. See attached screen captures of the various GUI states. NOTE: the attchments do not show my vlan config, just the dyanmic

NOTE: The GUI Port numbering seems to have "reversed" 1 2 3 4 matches physical ports 4 3 2 1. I have not test if my "restored" vlans actually results in isolation. I was just happy to have a working router again. I will test it later.



r52189 Switch Config Tab, Restored by select disable VLans click Apply Settings which rebooted, then after reboot select enable.png
 Description:
 Filesize:  43.18 KB
 Viewed:  2691 Time(s)

r52189 Switch Config Tab, Restored by select disable VLans click Apply Settings which rebooted, then after reboot select enable.png



r52189 Switch Config Tab after internal settling.png
 Description:
 Filesize:  49.41 KB
 Viewed:  2691 Time(s)

r52189 Switch Config Tab after internal settling.png



r52189 initial Switch Config tab.png
 Description:
 Filesize:  41.63 KB
 Viewed:  2691 Time(s)

r52189 initial Switch Config tab.png


ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2927
Location: Germany

PostPosted: Thu Mar 30, 2023 3:00    Post subject: Reply with quote
you have to set the valns like in the first screenshot then it works...
Wildlion
DD-WRT Guru


Joined: 24 May 2016
Posts: 1407

PostPosted: Thu Mar 30, 2023 5:15    Post subject: Reply with quote
Router: Buffalo WZR-1750DHP
Firmware: buffalo-wzr-1750dhp-webflash.bin (v3.0-r52189 std)
Kernel: Linux 4.4.302-st38 #9014 SMP Tue Mar 28 11:03:47 +06 2023 armv7l
Status: Working
Reset: No
Notes on configuration:

    Media Network
    DNSMasq
    Port Forwarding
    DHCP reservation
    DNSSEC
    SFE -- Disabled

Errors:

    1. enabling VLANs (broadcom) causes lots of problems and router can stop responding to network traffic
    during debugging I had to reflash/tftp via serial
    *currently disabled VLANs* but will try again in future.

ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2927
Location: Germany

PostPosted: Thu Mar 30, 2023 5:57    Post subject: Reply with quote
That is why you use WLAN connections when configuring the switch.

1. establish WLAN connection
2. disable "VLAN config
3. Problem solved

And if you configure VLANs correctly, TAB will not cause any problem at all.
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6856
Location: Romerike, Norway

PostPosted: Thu Mar 30, 2023 8:44    Post subject: Reply with quote
Router Model: Asus RT-AC66U
Firmware Version: DD-WRT v3.0-r52189 giga (03/28/23)
Kernel Version: Linux 4.4.302-st38 #22682 Tue Mar 28 03:33:21 +06 2023 mips

Status: Working
PaulGo
DD-WRT User


Joined: 01 Dec 2021
Posts: 289
Location: Maryland, United States

PostPosted: Thu Mar 30, 2023 15:59    Post subject: Reply with quote
Router/Version: Netgear R7000P
Firmware Version: DD-WRT v3.0-r52189 std (03/28/23)
Kernel Version: Linux 4.4.302-st38 #9020 SMP Tue Mar 28 11:49:16 +06 2023 armv7l
Previous/Reset: r52095 / No Reset
Mode/Status: Gateway / Working
Issues/Errors : None with Verizon, no LAN IPv6 with Comcast

Shortcut Forwarding Engine:SFE

Flow Acceleration: CTF and FA

With Comcast Xfinity, I can only obtain a WAN IPv6 address with a firewall modification, but no LAN address.

https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=333513

VHT160 which is an option does not work. It defaults to Auto, which is channel 36 and the channel width is 20MHz.
ZenInTexas
DD-WRT Novice


Joined: 11 Aug 2020
Posts: 47

PostPosted: Thu Mar 30, 2023 17:11    Post subject: Reply with quote
ho1Aetoo wrote:
you have to set the valns like in the first screenshot then it works...


I am not sure if you took a look at the screen captures. After first reboot, the Switch Config page does not have a CPUPORT column. Without the CPUPORT column, it would be hard to make it look like the last screen capture (I assume you mean manaully use nvram to get the Switch Config to look like the last screen capture, with the CPUPORT column).
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2927
Location: Germany

PostPosted: Fri Mar 31, 2023 12:37    Post subject: Reply with quote
sorry, I did not notice, was probably something early in the morning.
tsjk
DD-WRT Novice


Joined: 29 Jul 2021
Posts: 6

PostPosted: Fri Mar 31, 2023 12:48    Post subject: Reply with quote
Router/Version: ASUS RT-N66U
File/Kernel: dd-wrt.v24-52189_NEWD-2_K3.x-big-RT-N66U.trx / Linux ASUS-RT-N66U 4.4.302-st38 #22698 Tue Mar 28 03:55:53 +06 2023 mips DD-WRT
Previous/Reset: dd-wrt.v24-52095_NEWD-2_K3.x-big-RT-N66U.trx / No reset
Mode/Status: Home NAT+AP with WireGuard VPN, JFFS2 enabled, USB-stick mounted at /opt (ext4), Entware
Issues/Errors: None (USB-stick works after having been reformatted - was previously used with AsusWRT Merlin (LTS)).
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum