Posted: Thu Mar 23, 2023 4:40 Post subject: New Build - 03/23/2023 - r52095
Welcome to Atheros r52095 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Status: Up and running for 2 hours, basic setup as Gateway, static leases, port forwarding DDNS, WOL, 2,4GHz, VAP for IoT, 5Ghz, (Vanilla Firmware, Disabled Airtime), DDNS (Inadyn) to freedns.afraid.org.
On demand governor with minimum 800 MHz.
IPv6 working with PD /56.
Linksys EA8500...main gateway
DD-WRT v3.0-r52095 std (03/23/23)
Linux 4.9.337 #1714 SMP Thu Mar 23 03:11:42 +07 2023 armv7l
scp 'firmware.bin' install over r52054
all good
Update: CLI r51589 > r52095
Reset: NO
Mode: Gateway
Status: Operational 1 Hour
WAN Connection Type: PPPoE
Services Used: DHCP Server, DNSMasq, USB Mount, conf-file=/jffs/dnsmasq.custom - Static Leases, IPv4, OVPN Obfuscated Server, 3 x Wireguard Commercial Client VPN's, 1 x VLAN for I-o-T, No Wireless Enabled On This Router - 2 x Wireless Mesh System Attached to LAN & VLAN.
DNS: Unbound Pi-Hole
Errors: Nothing Untoward Showing In Logs
Router/Version: Netgear XR500
Update method:WebUpgrade
File/Kernel: dd-wrt-webupgrade.bin / Linux 4.9.337 #1716 SMP Thu Mar 23 03:33:35 +07 2023 armv7l
Previous/Reset: r52054 / no
Mode/Status: Gateway / Up and running for 4:16 hours
Issues/Errors: Nothing significant
_______________________________________________________________________________________________
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #167348 Thu Mar 23 06:17:22 +06 2023 mips
Previous/Reset: r52081 / no
Mode/Status: AP wired and wireless / Up and running for 3:01 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55819
Broadcom
Asus RT-AC87U R - DD-WRT 55819
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Router Model Netgear R9000 Nighthawk X10
Firmware Version DD-WRT v3.0-r52095 std (03/23/23)
Kernel Version Linux 4.9.337 #663 SMP Tue Mar 21 04:53:07 +07 2023 armv7l
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r52095 std (03/23/23)
Kernel Version Linux 3.18.140-d6 #167362 Thu Mar 23 06:34:10 +06 2023 mips
R9000
Services - SMB, Inadyn, Dnscrypt, QOS, DNS Capture, DHCP, Vanilla 2.4 40Mhz, 5.0 Ghz 80 WDS ap on Channel 149 Uu
Errors: none
R7800
Services: WDS STa - 5ghz Channel 149 UU, 2.4GHz AP, 5ghz VAP
Errors - VAP doesn't function correctly on all channels if int is in wds STA mode
(example works fine if the WDS AP channel on other router is 100, doesn't work at all on 149) ticket #7661, this is even on a reset upgrade and is consistent at least for channel 149. Unfortunately channel 100 isnt a viable option for me
Last edited by nyddwrtuser330 on Thu Mar 23, 2023 21:44; edited 1 time in total
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Thu Mar 23, 2023 19:34 Post subject:
vht160 still not working on qca9984. vht80+80 appears to work at least standard vht80 clients still connect, but i dont have any vht80+80 clients (only have vht160) to fully test it.. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Joined: 21 Aug 2019 Posts: 120 Location: Here, There And Everywhere
Posted: Thu Mar 23, 2023 21:22 Post subject:
Router/Version: TP-Link ARCHER-C7 / v5
File/Kernel: DD-WRT v3.0-r52095 std (03/23/23) / Linux 3.18.140-d6 #167372 Thu Mar 23 06:53:25 +06 2023 mips
Previous/Reset: r52054 / No
Mode/Status: WDS Station / Working
Issues/Errors:
DD-WRT firmware for 5 GHz radio has much stronger signal than Vanilla. TX power is 30 mW in all cases.
Signal strength, as shown on the WDS AP (R7800):
- Vanilla: -77
- DD-WRT: -71 Override Chipset Restrictions DISABLED)
- DD-WRT: -63 (Override Chipset Restrictions ENABLED)