Posted: Tue Mar 21, 2023 10:45 Post subject: New Build - 03/21/2023 - r52081
Welcome to Broadcom r52081 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Posted: Wed Mar 22, 2023 7:05 Post subject: Re: New Build - 03/21/2023 - r52081
Router/Version: Linksys XAC1900 pretending to be EA6900 with XVortex CFE File/Kernel: XVortex CFE + this release + entware + adblock firewall script Previous/Reset: Needed full reset Mode/Status: 5ghz ap, adblocker, router, 1000,666 overclock Issues/Errors: Mac address currently identical on 2.4+5 adaptors, probably my end due to XVortex CFE, functioning very well
Thanks for a nice update, no issues so far, seems stable.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-52081_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r52081 big (03/21/23)
Kernel: Linux 4.4.302-st38 #22492 Tue Mar 21 08:25:13 +06 2023 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Installed yesterday, OK.
Posted: Wed Mar 22, 2023 8:38 Post subject: ASUS RT-AC68U & 2 x Linksys E2000
Asus RT-AC68U
Firmware: DD-WRT v3.0-r52081 std (03/21/23) - (previous r52054)
Kernel: Linux 4.4.302-st38 #8937 SMP Tue Mar 21 06:27:41 +06 2023 armv7l
5Ghz (Mixed) with 80Mhz channel width (upper/lower): Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz & 5Ghz: Ok
Reset: No
Status: Ok
Uptime: 42 mins
CPU Temperature: CPU 71.2 °C / WL0 47.5 °C / WL1 45.3 °C
2 x E2000
Firmware: DD-WRT v3.0-r52081 mega (03/21/23) - (previous r52054)
Kernel: Linux 4.4.302-st38 #22496 Tue Mar 21 08:31:34 +06 2023 mips
2.4Ghz (NG-mixed) with 40Mhz channel width: Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz: Ok
Reset: No
Status: Ok
Uptime: 58 mins / 50 mins
CPU Temperature: WL0 50.8 °C / WL0 49.6 °C
All devices working as AP's each with individual 1Gb wired connections to main firewalls
Quite happy with this build - no issues so far, but only been running for less than an hour, so will update if experiencing any.
Posted: Thu Mar 23, 2023 18:15 Post subject: Smooth
Router/Version: R7000P
File/Kernel: netgear-r7000p-webflash.bin
Previous/Reset: 52054 / NO
Mode/Status: Gateway / OK
Issues/Errors: None
Setup: 2 Ghz + 2 VAP (1 guest network, and 1 for IOT devices) | 5 Ghz + 1 VAP (Wireguard VPN with Surfshark, also in bridge with a VLAN for eth access to VPN) | 7 Vlans | 4 bridges/subnetworks and dedicated DHCD server for each of them. | Running Pihole for DNS | Several manual firewallrules. Mainly for Pihole, and restricted access to subnetworks and rules for the IOT network
Everything is smooth as butter and har been running for a long time. Infact I have never had much trouble with this router and DD-WRT. Thanks BS
Router/Version: TP-Link Archer C9 v1
File/Kernel: DD-WRT v3.0-r52081 std (03/21/23), Linux 4.4.302-st38 #8939 SMP Tue Mar 21 07:03:24 +06 2023 armv7l
Previous/Reset: r51530, Jan 29, 2023, no reset
Mode/Status: DHCP/Auto, SFE/CTF disabled, WiFi clients only: 5 GHz (AC/N) and 2.4GHx (N only) with TurboQAM disabled, ACK timing 100 meters, Key renewal interval: 0 seconds [had issues with the default (3600 seconds?) on previous builds, not tested on current build], SPI Firewall running on defaults, QoS: HFSC & SFQ are working well with minimal CPU impact
Issues/Errors: No errors or issues, running for one day