Posted: Sun Mar 05, 2023 16:00 Post subject: New Build - 03/05/2023 - r51937
Welcome to Broadcom r51937 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Posted: Sun Mar 05, 2023 16:15 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r51937 std (03/05/23) Kernel: Linux 4.4.302-st37 #8841 SMP Sun Mar 5 04:35:14 +06 2023 armv7l Mode: Gateway, Wireless AP, Static Leases, Dnsmasq Caching. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope, ran remove unused NVRAM parameters script. Previous: 03-04-2023-r51935 Status: Working really, really well so far; still testing. wl: 14E4:4360 Overclock (STOCK): 1000,800 (Stock for now, 1200,1600 later if it actually works. RAM OC appears to be broken.) Temperatures: CPU 55.8 °C / WL0 49.1 °C / WL1 50.5 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
Speedtest-4.jpg
Description:
Speedtest Over 5.8GHz Wireless. ISP Spec: 500 Mbps Down / 25 Mbps Up.
Filesize:
61.62 KB
Viewed:
3452 Time(s)
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
HOME Wired Multicast ISP 4K TV Network Router/Version: R7000
File/Kernel: DD-WRT v3.0-r51937 std (03/05/23)
Kernel Version: Linux 4.4.302-st37 #8841 SMP Sun Mar 5 04:35:14 +06 2023 armv7l
Previous/Reset: r51887 / No, CLI Update-> reboot & 2nd rebbot
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: Multicast,IGMP Snooping,CTF,SSH,Syslog
Services Disabled: 2.4 & 5Ghz Radios,FA,QoS,ttraff,Telnet,NAS,Samba
Running for over 19 hours.
OffSite #1 Router/Version: R7000
File/Kernel: DD-WRT v3.0-r51937 std (03/05/23)
Kernel Version: Linux 4.4.302-st37 #8841 SMP Sun Mar 5 04:35:14 +06 2023 armv7l
Previous/Reset: r51887 / No, CLI Update-> reboot & 2nd rebbot
Mode/Status: GW & AP / Working Well
Issues/Errors: none / none
Services Used: 2.4 & 5Ghz Radios,CTF,DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: FA,QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6
Running for over 19 hours.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Firmware: v3.0-r51937 std (03/05/23)
Router/Version: Netgear R7000 Kernel: Linux 4.4.302-st37 #8841 SMP Sun Mar 5 04:35:14 +06 2023 armv7l
Previous: v3.0-r51887 std (02/28/23)
Mode/Status: AP wired and wireless / Up and running for 1 day
Reset: Soft boot before and after upgrade
Temperatures: CPU 56.9 °C / WL0 44.8 °C / WL1 49.9 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (Bell Canada "Fibe", 500/500 Mbps).
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 N/G Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Just sent an email to BrainSlayer. There was probably a reason why these images did not compile / build. Nothing new, it happens. Please consider reporting after flashing and testing in the future. Thanks. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Joined: 18 Mar 2014 Posts: 12877 Location: Netherlands
Posted: Tue Mar 07, 2023 16:32 Post subject:
Router Model: Linksys E2000 (converted N320)
Firmware Version: DD-WRT v3.0-r51937 mega (03/05/23)
Kernel Version: Linux 4.4.302-st37 #22129 Sun Mar 5 06:17:35 +06 2023 mips
Upgraded: from DD-WRT v3.0-r50963 mega (11/28/22)
Reset: No not this time
Status: Up and running for 8 hours, basic setup as Gateway, static leases, , Wifi 2,4GHz working.
WireGuard Client working with PBR to Keepsolid.
WireGuard Server working.
The script looks for nvram entries which are empty e.g. nothing behind =
Note if you are using WireGuard you need the updated script otherwise the WireGuard keys are removed (those keys end always with =)
I am also using Netgear R7000 as member twindragon6. Looking in the Router status page, I see
Code:
NVRAM 28 KiB / 64 KiB
So I suppose I don't have any pressure on NVRAM. I suppose this should be the same for twindragon6. Would running the NVRAM cleanup script a "nice-to-have" health maintenance of the router?
I don't use WireGuard. But got curious after reading your answer. So I made a quick read of the DDRWT Wiki, Wireguard page. Sorry for the novice question. If the end goal is to make your DDWRT router as a Wireguard server. But would you need a VPN service provider? The Wiki page doesn't list this as a pre-requisite.
The script looks for nvram entries which are empty e.g. nothing behind =
Note if you are using WireGuard you need the updated script otherwise the WireGuard keys are removed (those keys end always with =)
I am also using Netgear R7000 as member twindragon6. Looking in the Router status page, I see
Code:
NVRAM 28 KiB / 64 KiB
So I suppose I don't have any pressure on NVRAM. I suppose this should be the same for twindragon6. Would running the NVRAM cleanup script a "nice-to-have" health maintenance of the router?
I don't use WireGuard. But got curious after reading your answer. So I made a quick read of the DDRWT Wiki, Wireguard page. Sorry for the novice question. If the end goal is to make your DDWRT router as a Wireguard server. But would you need a VPN service provider? The Wiki page doesn't list this as a pre-requisite.
Maybe @twindragon can answer what he sees as the use case for removing unused keys.
Posted: Wed Mar 08, 2023 8:08 Post subject: Re: New Build - 03/05/2023 - r51937
Router/Version: Linksys XAC1900 pretending to be an EA6900 File/Kernel: r51937 Previous/Reset: Stock firmware, fully reset Mode/Status: Router, small nas, 5ghz wifi Issues/Errors: No majors, however, had to manually set tx power for 5ghz to 30mw, auto had a very very weak 5ghz signal, performance good after enabling CTF+FA. 2.4ghz untested, very weak signal a while back different firmware. Also reinstalled 32kb nvram bug fix startup command, nvram at 26kb :/.
Seems good enough to keep up with Quest 2 headset for 5ghz, thank you.
