[blkt]

Welcome to Atheros r51937 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 51935 (mirror)

• OpenVPN 2.6.0: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
• mDNS/Avahi ~2023 WG DD dnsmasq DNSCrypt Unbound FW wolfSSL Tor PHP K FW XMSN WG NFS nDPI K OCR Plex * DRV
• In-kernel SMB (ksmbd/tools 3.4.6/3.4.5): guest user is selectable. • WSD update • ANTFS/NTFS3 kernel mode driver++++

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[IONK]

Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r51937) / Linux 4.9.337 #1623 SMP Sun Mar 5 04:30:10 +07 2023 armv7l
Previous/Reset: DD-WRT v3.0-r51935 std (03/04/23) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 20MHz, 802.11r (FT), SSH (public key), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), CIFS Automount, WireGuard server, Cron / working
Issues/Errors: none

[mrjcd]

Just say'n be careful installing on EA8500 or WNDR3700v4

likely depends on configs --- ain't worth my time/trouble to sort so both EA8500 put back on r51935
WNDR3700v4 reinstalled r51935 ---used good backups put all back to good working units

damnol broadcomy E2500 used as a WAP seemed to fair ok so he's running r51937

[ho1Aetoo]

hi sir mrjcd, it would actually not be bad if you could describe your problems.

If you say that r51935 works it can only be a VLAN interface problem.
Because there are only two commits between r51935 and r51937.

But since you have the switch config tab certainly not used because it was heavily broken on the EA8500,
I would be interested to know what is not working anymore.

[MLandi]

Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r51937 std (03/05/23)
Previous/Reset: DD-WRT v3.0-r51935 std (03/04/23) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: None

[mac913]

Home Main Gateway Router

Router/Version: R7800
File/Kernel: DD-WRT v3.0-r51937 std (03/05/23)
Kernel Version: Linux 4.9.337 #1623 SMP Sun Mar 5 04:30:10 +07 2023 armv7l
Previous/Reset: r51887 / No, CLI Update-> reboot & 2nd reboot
Mode/Status: GW / Working Well
Issues/Errors: On Reboot Startup Scripts didn't start, on 2nd Reboot All Good / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: 2.4 & 5Ghz Radios,QoS,ttraff,SFE,Telnet,NAS,Samba,YAMon3.4.6

Running for over 19 hours.


Home Main AP Router

Router/Version: R7800
File/Kernel: DD-WRT v3.0-r51937 std (03/05/23)
Kernel Version: Linux 4.9.337 #1623 SMP Sun Mar 5 04:30:10 +07 2023 armv7l
Previous/Reset: r51887 / No, CLI Update-> reboot & 2nd rebbot
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: none / none
Services Used: 2.4 & 5Ghz Radios,Static WAN,IPv6-6to4,WiFi DD-WRT,NTP,2xWG Clients,VAPx,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: SPI,QoS,ttraff,SFE,Telnet,NAS,Samba

I did test WiFi Firmware DD-WRT but 2.4Ghz 20Mhz G/N Download speed where capped to around 16Mbps, uploads where over 75Mbps. Sticking with Vanilla on both radios.

Fixed: 5Ghz LED is Working since r51887!

Running for over 19 hours.

Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

[KACTET]

Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #165753 Sun Mar 5 07:37:13 +06 2023 mips
Previous/Reset: r51935 / no
Mode/Status: AP wired and wireless / Up and running for 3:01 hours
Issues/Errors: Nothing significant

The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch

Thank you BS and gurus!

[Alozaros]

Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r51937 std (03/05/23)
Kernel Version Linux 3.18.140-d6 #165767 Sun Mar 5 07:55:26 +06 2023 mips

update: GUI r51935 > r51937
reset: NO
mode: Gateway
status: Operational 24h+
errors: Nothing new, yet...

[hebeda]

Router Model TP-Link Archer C5 1.2 , Dlink EXO 869, Dlink DIR 859

update: GUI r50841 > r51937
reset: NO
mode: Gateway
status: 1 minute
errors: instant crash and reboot when Wireguard Tunnel is enabled , testet also with R51787 , same result - with r50841 is wireguard tunnel all stable ...

[egc]

[hebeda]

yes, Linux 3.18.140

with or without reset, no different, same problem across all these mentioned models which are quite similar ...

i cannot get any log, because the device crashes immediatly on reboot .. i dont want to hook it up to serial right now , i dont have the time for that ...