Posted: Sun Mar 05, 2023 16:00 Post subject: New Build - 03/05/2023 - r51937
Welcome to Atheros r51937 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Just say'n be careful installing on EA8500 or WNDR3700v4
likely depends on configs --- ain't worth my time/trouble to sort so both EA8500 put back on r51935
WNDR3700v4 reinstalled r51935 ---used good backups put all back to good working units
damnol broadcomy E2500 used as a WAP seemed to fair ok so he's running r51937
hi sir mrjcd, it would actually not be bad if you could describe your problems.
If you say that r51935 works it can only be a VLAN interface problem.
Because there are only two commits between r51935 and r51937.
But since you have the switch config tab certainly not used because it was heavily broken on the EA8500,
I would be interested to know what is not working anymore.
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r51937 std (03/05/23)
Kernel Version: Linux 4.9.337 #1623 SMP Sun Mar 5 04:30:10 +07 2023 armv7l
Previous/Reset: r51887 / No, CLI Update-> reboot & 2nd reboot
Mode/Status: GW / Working Well
Issues/Errors: On Reboot Startup Scripts didn't start, on 2nd Reboot All Good / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: 2.4 & 5Ghz Radios,QoS,ttraff,SFE,Telnet,NAS,Samba,YAMon3.4.6
Running for over 19 hours.
Home Main AP Router
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r51937 std (03/05/23)
Kernel Version: Linux 4.9.337 #1623 SMP Sun Mar 5 04:30:10 +07 2023 armv7l
Previous/Reset: r51887 / No, CLI Update-> reboot & 2nd rebbot
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: none / none
Services Used: 2.4 & 5Ghz Radios,Static WAN,IPv6-6to4,WiFi DD-WRT,NTP,2xWG Clients,VAPx,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: SPI,QoS,ttraff,SFE,Telnet,NAS,Samba
I did test WiFi Firmware DD-WRT but 2.4Ghz 20Mhz G/N Download speed where capped to around 16Mbps, uploads where over 75Mbps. Sticking with Vanilla on both radios.
Fixed: 5Ghz LED is Working since r51887!
Running for over 19 hours.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #165753 Sun Mar 5 07:37:13 +06 2023 mips
Previous/Reset: r51935 / no
Mode/Status: AP wired and wireless / Up and running for 3:01 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55819
Broadcom
Asus RT-AC87U R - DD-WRT 55819
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Mon Mar 06, 2023 21:36 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r51937 std (03/05/23)
Kernel Version Linux 3.18.140-d6 #165767 Sun Mar 5 07:55:26 +06 2023 mips
update: GUI r51935 > r51937
reset: NO
mode: Gateway
status: Operational 24h+
errors: Nothing new, yet... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Router Model TP-Link Archer C5 1.2 , Dlink EXO 869, Dlink DIR 859
update: GUI r50841 > r51937
reset: NO
mode: Gateway
status: 1 minute
errors: instant crash and reboot when Wireguard Tunnel is enabled , testet also with R51787 , same result - with r50841 is wireguard tunnel all stable ...
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Tue Mar 07, 2023 16:36 Post subject:
hebeda wrote:
Router Model TP-Link Archer C5 1.2 , Dlink EXO 869, Dlink DIR 859
update: GUI r50841 > r51937
reset: NO
mode: Gateway
status: 1 minute
errors: instant crash and reboot when Wireguard Tunnel is enabled , testet also with R51787 , same result - with r50841 is wireguard tunnel all stable ...
with or without reset, no different, same problem across all these mentioned models which are quite similar ...
i cannot get any log, because the device crashes immediatly on reboot .. i dont want to hook it up to serial right now , i dont have the time for that ...