Posted: Sat Mar 04, 2023 15:17 Post subject: New Build - 03/04/2023 - r51935
Welcome to Atheros r51935 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Netgear XR500
Update method:WebUpgrade
File/Kernel: dd-wrt-webupgrade.bin / Linux 4.9.337 #1617 SMP Sat Mar 4 03:48:21 +07 2023 armv7l
Previous/Reset: r51887 / no
Mode/Status: Gateway / Up and running for 4:16 hours
Issues/Errors: Nothing significant
________________________________________________________________________________________________
Router/Version: TP-Link WDR4900 V1
Update method: WebUpgrade
File/Kernel: tl-wdr4900-webflash.bin / Linux 4.4.302-st37 #3087 Sat Mar 4 03:30:20 +06 2023 ppc
Previous/Reset: r51887 / no
Mode/Status: Gateway / Up and running for 2:56 hours
Issues/Errors: Nothing significant
________________________________________________________________________________________________
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #165629 Sat Mar 4 07:13:02 +06 2023 mips
Previous/Reset: r51887 / no
Mode/Status: AP wired and wireless / Up and running for 3:01 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55303
Broadcom
Asus RT-AC87U R - DD-WRT 55460
Asus RT-N66U - DD-WRT 55460
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Linksys EA8500...main gateway
DD-WRT v3.0-r51935 std (03/04/23)
Linux 4.9.337 #1615 SMP Sat Mar 4 03:26:46 +07 2023 armv7l
scp 'firmware.bin' install over r51887
tis worky fine -- uptime 4:17
#
Netgear WNDR3700 V4
DD-WRT v3.0-r51935 std (03/04/23)
Linux 3.18.140-d6 #165671 Sat Mar 4 08:32:22 +06 2023 mips
scp 'firmware.bin' install over r51887
used as OVPN server + WAP with isolated VAP guest net 2.4 only ..5GHz is disabled.
all worky very well -- uptime 4:15
just been a switch & OVPN server for long while but yesterday (running r51887) I tinkered with its wireless & added a VAP to match settings of oldass WNR2000v3 it replaced at far end of my WDS net.
Folks at the far end have too many/much wireless junk that caused old WNR2000v3 to reboot itself sometimes so the WNDR3700v4 will fix that for sure.
Also still using E2500 WAP in back room over yonder also
Joined: 03 Nov 2015 Posts: 316 Location: Florida, USA
Posted: Sat Mar 04, 2023 17:03 Post subject:
Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r51935 std (03/04/23)
Kernel: Linux 4.9.337 #1615 SMP Sat Mar 4 03:26:46 +07 2023 armv7l
Reset: NO...GUI upgrade from r51855
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: None
Router: Linksys ea8500 ..WDS Stations ... X (2)
Firmware: DD-WRT v3.0-r51935 std (03/04/23)
Kernel: Linux 4.9.337 #1615 SMP Sat Mar 4 03:26:46 +07 2023 armv7l
Reset: NO...GUI upgrade from r51855
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: None
Everything upgraded perfect!... Stations connected instantly... Thanks BS, GURUs, and ALL !! Great work ! _________________ ......All GOOD here... Just Handshakes and Time Stamps !......
Update method: WebUpgrade
Router/Version: TP-Link TL-WR841ND v8
File/Kernel: DD-WRT v3.0-r51935 std (03/04/23)
Previous/Reset: DD-WRT v3.0-r51589 std (02/07/23) / No reset.
Mode/Status: Gateway, Wireless Radio Mode: Station
Issues/Errors: None so far.
Update method: WebUpgrade
Router/Version: GL.iNet-AR150
File/Kernel: DD-WRT v3.0-r51935 std (03/04/23)
Previous/Reset: DD-WRT v3.0-r51589 std (02/07/23) / No reset.
Mode/Status: Gateway, Wireguard, OpenVPN Server and Client, PPTP Server and Client, DDNS, SSH, Wireless Radio Mode: Station
Issues/Errors: OpenVPN Server can't connect. Last working release with OpenVPN Server was r51617.
Update method: WebUpgrade
Router/Version: TP-Link Archer C7 v5
File/Kernel: DD-WRT v3.0-r51935 std (03/04/23)
Previous/Reset: DD-WRT v3.0-r51589 std (02/07/23) / No reset.
Mode/Status: WLAN 0 AP / inactive, WLAN 1 Station bridge (routed) / active, WLAN 1.1 AP (WDS) / active
Issues/Errors: Wireless 5G connection to primary AP doesn't work.
Site Survey shows APs and the needed AP and allows to connect, but disconnects after a few seconds / never getting a working connection, WLAN LED no activity. Downgraded to r51589 (02/07/23) working again.
51935, 51887, 51787, 51741, 51617 do not work
51589, 51288 are OK
Joined: 16 Nov 2015 Posts: 6410 Location: UK, London, just across the river..
Posted: Sat Mar 04, 2023 18:14 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r51935 std (03/04/23)
Kernel Version Linux 3.18.140-d6 #165643 Sat Mar 4 07:30:45 +06 2023 mips
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r51935 std (03/04/23)
Kernel Version Linux 4.9.337 #1617 SMP Sat Mar 4 03:48:21 +07 2023 armv7l
update: CLI r51887 > r51935
reset: NO
mode: Gateway
status: Operational 9h+
errors: Nothing new, yet...Thanks BS ! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Joined: 15 Aug 2016 Posts: 223 Location: Melbourne, Australia
Posted: Sun Mar 05, 2023 0:06 Post subject:
Netgear R9000 File: DD-WRT v3.0-r51935 std (03/04/23)
Kernel: Linux 4.9.337 #660 SMP Sat Feb 25 03:19:49 +07 2023 armv7l
[features]:
....
- Private OpenVPN Server (own certificates, keys, etc.)
- PIA OpenVPN Client
Issues/Errors:
- Could not connect to private VPN Server when PIA VPN Client is enabled.
But private Server can be connected when PIA Client is disabled.
(In both cases, both Server and Client indicate 'CONNECTED SUCCESS' with same settings used; and connection to PIA works with no issue at all in either case).
The error above occurs since OpenVPN was upgraded to 2.6.
Backed down to r51440, everything works fine.
Thanks to BS & Team for continuing developments. _________________ Life is a journey; travel alone makes it less enjoyable and lonely.
Issues/Errors:
- Could not connect to private VPN Server when PIA VPN Client is enabled.
But private Server can be connected when PIA Client is disabled.
(In both cases, both Server and Client indicate 'CONNECTED SUCCESS' with same settings used; and connection to PIA works with no issue at all in either case).
The error above occurs since OpenVPN was upgraded to 2.6.
Backed down to r51440, everything works fine.
blkt wrote:
nuTaHkaTa wrote:
OpenVPN Server can't connect. Last working release with OpenVPN Server was r51617.
_________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
Joined: 25 Dec 2020 Posts: 90 Location: Toronto - Canada
Posted: Sun Mar 05, 2023 8:00 Post subject:
Netgear R7800 Firmware Version DD-WRT v3.0-r51935 std (03/04/23)
Kernel Version Linux 4.9.337 #1617 SMP Sat Mar 4 03:48:21 +07 2023 armv7l
Upgrade Method HTTPS via Web GUI
Previous Build/Reset r51887/NO
Up Time 1 hour
Configuration Type Gateway
WAN DHCP. LAN/wlan0 5Ghz vanilla VHT80+80 br0 with AP Mesh attached. Wlan0.1 Isolated AP Isolated network with FW rule(s) to wlan1 resource(s). Wlan1 2.4Ghz Vanilla 20/40 without Masquerade/NAT. Wlan1.1 Isolated AP and Isolated network. All clients with static leases x4 DHCP. MAC Filtering. Time restrictions. Ignore WAN DNS with static DNS servers, DNSMASQ, cached DNSSEC, Validate DNSSEC replies, no DNS rebind, Query DNS strict order. WPA 3 and WPA 2. Syslogd to FS on br0 LAN. Cooling fan USB attached. WAN traffic counter.
Joined: 16 Nov 2015 Posts: 6410 Location: UK, London, just across the river..
Posted: Sun Mar 05, 2023 9:31 Post subject:
DWCruiser wrote:
Netgear R9000 File: DD-WRT v3.0-r51935 std (03/04/23)
Kernel: Linux 4.9.337 #660 SMP Sat Feb 25 03:19:49 +07 2023 armv7l
[features]:
....
- Private OpenVPN Server (own certificates, keys, etc.)
- PIA OpenVPN Client
Issues/Errors:
- Could not connect to private VPN Server when PIA VPN Client is enabled.
But private Server can be connected when PIA Client is disabled.
(In both cases, both Server and Client indicate 'CONNECTED SUCCESS' with same settings used; and connection to PIA works with no issue at all in either case).
The error above occurs since OpenVPN was upgraded to 2.6.
Backed down to r51440, everything works fine.
Thanks to BS & Team for continuing developments.
my PIA its working fine just revise your custom VPN rules some are depreciated