Posted: Tue Feb 28, 2023 11:00 Post subject: New Build - 02/28/2023 - r51887
Welcome to Atheros r51887 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Tue Feb 28, 2023 14:03 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r51887 std (02/28/23)
Kernel Version Linux 3.18.140-d6 #165149 Tue Feb 28 06:10:35 +06 2023 mips
Status - reverted back to 51787.
My setup utilizes host files on an SMB share connected to this router via usb drive and is referenced in addional config options as a hosts line. other services, DHCP, Inadyn, QOS, WDSAP 5GHZ 80, AP 2.4GHz,DNS, dnscrypt
there appears to be something not right with the SMB and DNSMasq in my config. SMB would not be available over the network at all, however minidlna worked fine.
DNSMasq would not serve dhcp addresses until manually restarted, despite server being up.
Even afterit was up, which then suddenly made SMB available to wireless apple clients, if you accessed the smb share, the iphone 14 dropped the connection to wifi within a few seconds later
went back to 51787 and all is well
Update method: WebUpgrade
Router/Version: TP-Link TL-WR841ND v8
File/Kernel: DD-WRT v3.0-r51887 std (02/28/23)
Previous/Reset: DD-WRT v3.0-r51589 std (02/07/23) / No reset.
Mode/Status: Gateway, Wireless Radio Mode: Station
Issues/Errors: None so far.
Update method: WebUpgrade
Router/Version: GL.iNet-AR150
File/Kernel: DD-WRT v3.0-r51887 std (02/28/23)
Previous/Reset: DD-WRT v3.0-r51589 std (02/07/23) / No reset.
Mode/Status: Gateway, Wireguard, OpenVPN Server and Client, PPTP Server and Client, DDNS, SSH, Wireless Radio Mode: Station
Issues/Errors: OpenVPN Server can't connect. Last working release with OpenVPN Server was r51617.
Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r51887 std)
Kernel: Linux 3.10.108-d11 #127390 Tue Feb 28 04:10:57 +06 2023 mips
Status: working
Reset: Yes
Notes on configuration:
Station
Errors:
1. 5Ghz wireless light is not on (2.4Ghz light works)
Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r51887 std)
Kernel: Linux 3.10.108-d11 #127388 Tue Feb 28 03:52:43 +06 2023 mips
Status: Working
Reset: None
Notes on configuration: Used for Wifi Lab (no internet)
Errors:
None
Router: Archer-A7 v5
Firmware: tplink_archer-a7-v5.bin (v3.0-r51887 std)
Kernel: Linux 3.18.140-d6 #165161 Tue Feb 28 06:35:38 +06 2023 mips
Status: Working
Reset: None
Notes on configuration:
DNSMasq
Virtual wireless with bridging x2
multiple DHCP server
Errors:
None
Edit: I did reset the TL-WDR3600 v1
Last edited by Wildlion on Thu Mar 02, 2023 1:29; edited 1 time in total
Joined: 25 Dec 2020 Posts: 90 Location: Toronto - Canada
Posted: Wed Mar 01, 2023 6:28 Post subject:
Netgear R7800 Firmware Version DD-WRT v3.0-r51887 std (02/28/23)
Kernel Version Linux 4.9.337 #1603 SMP Tue Feb 28 02:30:55 +07 2023 armv7l
Upgrade Method HTTPS DL via Web GUI
Previous Build/Reset r51855/NO
Up Time 1.5 hours
Configuration Type Gateway
WAN DHCP. LAN/wlan0 5Ghz vanilla VHT80+80 br0 with AP Mesh attached. Wlan0.1 Isolated AP Isolated network with FW rule(s) to wlan1 resource(s). Wlan1 2.4Ghz Vanilla 20/40 without Masquerade/NAT. Wlan1.1 Isolated AP and Isolated network. All clients with static leases x4 DHCP. MAC Filtering. Time restrictions. Ignore WAN DNS with static DNS servers, DNSMASQ, cached DNSSEC, Validate DNSSEC replies, no DNS rebind, Query DNS strict order. WPA 3 and WPA 2. Syslogd to FS on br0 LAN. Cooling fan USB attached. WAN traffic counter.
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r51887 std (02/28/23)
Kernel Version: Linux 4.9.337 #1603 SMP Tue Feb 28 02:30:55 +07 2023 armv7l
Previous/Reset: r51838 / No, CLI Update-> reboot & 2nd reboot
Mode/Status: GW / Working Well
Issues/Errors: On Reboot Startup Scripts didn't start, on 2nd Reboot All Good / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: 2.4 & 5Ghz Radios,QoS,ttraff,SFE,Telnet,NAS,Samba,YAMon3.4.6
Running for over 19 hours.
Home Main AP Router
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r51887 std (02/28/23)
Kernel Version: Linux 4.9.337 #1603 SMP Tue Feb 28 02:30:55 +07 2023 armv7l
Previous/Reset: r51838 / No, CLI Update-> reboot & 2nd rebbot
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: none / none
Services Used: 2.4 & 5Ghz Radios,Static WAN,IPv6-6to4,WiFi DD-WRT,NTP,2xWG Clients,VAPx,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: SPI,QoS,ttraff,SFE,Telnet,NAS,Samba
Fixed: 5Ghz LED is Working!
Running for over 19 hours.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Wed Mar 01, 2023 14:16 Post subject:
Wildlion wrote:
Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r51887 std)
Kernel: Linux 3.10.108-d11 #127390 Tue Feb 28 04:10:57 +06 2023 mips
Status: working
Reset: No
Notes on configuration:
Station
Errors:
1. 5Ghz wireless light is not on (2.4Ghz light works)
When yo use this newest build on this model your Settings -> switch config tab is configurable ? Actually I'm stay on build 02/07/23, becuase when I'm touch options in settings -> switch config tab then click save and click apply settings router totally stop respond. I can't use wired connection internet, GUI, ssh management. I can solve problems with restore factory defaults and make fresh configuration. All features operating until I try to reconfigure switch options. Cause that problem is exist I'm decide to use older build where all features work good.
Netgear R7800 WDS AP
DD-WRT v3.0-r51887 std (02/28/23)
Linux 4.9.337 #1603 SMP Tue Feb 28 02:30:55 +07 2023 armv7l
CLI upgrade over 51530
No reset
GW,wlan0 WDS AP w/wlan0 VAP Vanilla, wlan1 AP DD-WRT, Ovpn client, ProFTPD, Samba ,SmartDNS
Entware, Static leases, on_demand, up_threshold 20
port 1 (physical port 4) moved to br1 due to new more better ISP and isolating my neighbors from my network
Netgear R7500v2 WDS STA
DD-WRT v3.0-r51887 std (02/28/23)
Linux 4.9.337 #1602 SMP Tue Feb 28 02:19:43 +07 2023 armv7l
CLI upgrade over 51506
No reset
wlan0 WDS Sta DD-WRT w/wlan0 VAP & wlan1 AP Vanilla,
SMB, ProFTPD, Fat32 & ext2
ondemand, up_threshold 20
Posted: Wed Mar 01, 2023 17:00 Post subject: EA8500 r51887 vanilla crash since 11-28-2022-r50963
10-11-2022-r50474 through 11-23-2022-r50931 vanilla is good crc32 4716237b, no builds r50932 through r50962.
However, I am willing flash any test builds to step through or bisect to isolate exactly which changeset crash begins.