Posted: Sat Feb 25, 2023 11:27 Post subject: New Build - 02/25/2023 - r51855
Welcome to Atheros r51855 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Update method: WebUpgrade
Router/Version: TP-Link TL-WR841ND v8
File/Kernel: DD-WRT v3.0-r51855 std (02/25/23)
Previous/Reset: DD-WRT v3.0-r51589 std (02/07/23) / No reset.
Mode/Status: Gateway, Wireless Radio Mode: Station
Issues/Errors: None so far.
Update method: WebUpgrade
Router/Version: GL.iNet-AR150
File/Kernel: DD-WRT v3.0-r51855 std (02/25/23)
Previous/Reset: DD-WRT v3.0-r51589 std (02/07/23) / No reset.
Mode/Status: Gateway, Wireguard, OpenVPN Server and Client, PPTP Server and Client, DDNS, SSH, Wireless Radio Mode: Station
Issues/Errors: OpenVPN Server can't connect. Last working release with OpenVPN Server was r51617.
Router Model Netgear XR500
Firmware Version DD-WRT v3.0-r51855 std (02/25/23)
Kernel Version Linux 4.9.337 #1588 SMP Sat Feb 25 15:22:47 +07 2023 armv7l
Current Time Sat, 25 Feb 2023 09:02:48
System Details CPU Model QCA IPQ806X
CPU Cores 2
CPU Clock 1725 MHz / 1725 MHz
Load Average 3% 0.05, 0.27, 0.24
Temperatures CPU 49.41 °C / wlan0 52 °C / wlan1 55 °C
Issues / Errors Nothing detected
LED's are all up but I don't care as I turn them off anyways as I Don't Like flashing lights distracting me at my desk. Firewall logs tracking my Usual suspects trying to penetrate my network.
Thanks to all for the work on keeping everything running.
Router/Version: Netgear 7500v2
File/Kernel: dd-wrt-webupgrade-51855.bin / Linux 4.9.337 #1587 SMP Sat Feb 25 15:12:12 +07 2023 armv7l
Previous/Reset: 51787 / No Reset
Mode/Status: Gateway, SFE Disabled, Wifi 5 (DDWRT)/2.4(VANILLA) Main+Guest(VAP), Entware, Dnscrypt, OpenVPN, NAS, traff, Static & DHCP / Up and Running.
Issues/Errors: All working (including 5GHZ LED which has operated reliably for the last couple of releases) / Cosmetic error on Wireless Page.
Wireless > Basic Settings:
Between the DOMAIN and TX Power there's a new radio button with the label "undefined" which is defaulted to "Disable".
Edit: Flush browser cache and reload to correct. Thanks blkt!
Thanks to BS and crew for all your good work.
Last edited by whitebeard on Sat Feb 25, 2023 15:49; edited 2 times in total
Joined: 03 Nov 2015 Posts: 317 Location: Florida, USA
Posted: Sat Feb 25, 2023 16:37 Post subject:
Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r51855 std (02/25/23)
Kernel: Linux 4.9.337 #1586 SMP Sat Feb 25 15:01:49 +07 2023 armv7l
Reset: NO...GUI upgrade from r51576
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: None
Router: Linksys ea8500 ..WDS Stations ... X (2)
Firmware: DD-WRT v3.0-r51855 std (02/25/23)
Kernel: Linux 4.9.337 #1586 SMP Sat Feb 25 15:01:49 +07 2023 armv7l
Reset: NO...GUI upgrade from r51576
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: None
OK, All running on r51855 and seem to be doing fine. Thanks BS, GURUs and all ! _________________ ......All GOOD here... Just Handshakes and Time Stamps !......
Last edited by ramblin on Sat Feb 25, 2023 22:09; edited 1 time in total
Joined: 05 Oct 2008 Posts: 666 Location: Helsinki, Finland / nr. Alkmaar, Netherlands
Posted: Sat Feb 25, 2023 16:53 Post subject:
blkt wrote:
whitebeard wrote:
Wireless > Basic Settings:
Between the DOMAIN and TX Power there's a new radio button with the label "undefined" which is defaulted to "Disable".
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Actually the button is labeled "Override Chipset Restrictions" and from the code I found for it, it can be deduced it would allow for going higher in TX power, higher than 'chipset restrictions' ...
Without further explanation it could be a potentially dangerous proposal. Not for the operator, mind you, but for the transmitter. So, is there a 'lowdown' available on this setting (if lowdown is indeed what you call the ultimate explanation?)
As a positive aside in these dark days ... the 5 GHz LED came on and survived a reboot on this very latest build, whereas the chance of getting it to work by settings change and reboot trickery seemed to become slimmer with the immediately previous builds.
Router/Version: TP-Link WDR4900 V1
File/Kernel: tl-wdr4900-webflash.bin / Linux 4.4.302-st37 #3075 Sat Feb 25 06:08:22 +06 2023 ppc
Previous/Reset: r51838 / no
Mode/Status: Gateway / Up and running for 4:25 hours
Issues/Errors: Nothing significant
________________________________________________________________________________________________
Router/Version: TP-Link TL-WR841ND v11
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #164711 Sat Feb 25 10:12:19 +06 2023 mips
Previous/Reset:r51838 / no
Mode/Status: AP wired and wireless / Up and running for 4:30 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55779
Broadcom
Asus RT-AC87U R - DD-WRT 55819
Asus RT-N66U - DD-WRT 55779
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
As a positive aside in these dark days ... the 5 GHz LED came on and survived a reboot on this very latest build, whereas the chance of getting it to work by settings change and reboot trickery seemed to become slimmer with the immediately previous builds.
r51855 std (02/25/23) - Not on my r7800...5GHz LED still not working. So far startup script runs on reboot.
======================================
Overnight 5GHz LED started working. I did nothing. 5GHz LED Still working after a couple of reboots. So far startup script runs after reboots. _________________ - a candle loses nothing by lighting another candle
Last edited by computerperson on Sun Feb 26, 2023 19:48; edited 1 time in total
Joined: 25 Dec 2020 Posts: 90 Location: Toronto - Canada
Posted: Sun Feb 26, 2023 8:09 Post subject:
Netgear R7800 Firmware Version DD-WRT v3.0-r51855 std (02/25/23)
Kernel Version Linux 4.9.337 #1588 SMP Sat Feb 25 15:22:47 +07 2023 armv7l
Upgrade Method HTTPS DL via Web GUI
Previous Build/Reset r51741/NO
Up Time 12.5 hours
Configuration Type Gateway
WAN DHCP. LAN/wlan0 5Ghz vanilla VHT80+80 br0 with AP Mesh attached. Wlan0.1 Isolated AP Isolated network with FW rule(s) to wlan1 resource(s). Wlan1 2.4Ghz Vanilla 20/40 without Masquerade/NAT. Wlan1.1 Isolated AP and Isolated network. All clients with static leases x4 DHCP. MAC Filtering. Time restrictions. Ignore WAN DNS with static DNS servers, DNSMASQ, cached DNSSEC, Validate DNSSEC replies, no DNS rebind, Query DNS strict order. WPA 3 and WPA 2. Syslogd to FS on br0 LAN. Cooling fan USB attached. WAN traffic counter.
Everything functioning perfectly! Thanks BS and team, amazing work cleaning things up and adding new features!
Last edited by CR_Apollo on Sun Feb 26, 2023 19:05; edited 2 times in total
