Posted: Wed Jan 25, 2023 9:21 Post subject: New Build - 01/25/2023 - r51506
Welcome to Atheros r51506 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: TP-Link WDR4900 V1
File/Kernel: tl-wdr4900-webflash.bin / Linux 4.4.302-st25 #2942 Wed Nov 23 04:45:32 +06 2022 ppc
Previous/Reset: r50931 / yes
Mode/Status: Gateway / bad flash
Issues/Errors: yes
Unsuccessful firmware installation. All new versions are broken since r50931
It is better to refrain from installing, having no experience in recovery
Router/Version: TP-Link TL-WR1043ND v4
File/Kernel: factory-to-ddwrt.bin / tplink_wr1043nd-v4.bin / Linux 3.18.140-d6 #161842 Wed Jan 25 06:12:44 +06 2023 mips
Previous/Reset: r51440 / no
Mode/Status: AP wired and wireless / Up and running for 2 hours
Issues/Errors: Nothing significant
Router/Version: TP-Link TL-WR841ND v11
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #161826 Wed Jan 25 05:50:12 +06 2023 mips
Previous/Reset: r51440 / no
Mode/Status: AP wired and wireless / Up and running for 2 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55779
Broadcom
Asus RT-AC87U R - DD-WRT 55819
Asus RT-N66U - DD-WRT 55779
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Linksys EA8500...main gateway
DD-WRT v3.0-r51506 std (01/25/23)
Linux 4.9.337 #1499 SMP Mon Jan 23 03:13:10 +07 2023 armv7l
scp 'firmware.bin' nstall over r51487
all worky fine
#
Netgear WNDR3700 V4
DD-WRT v3.0-r51506 std (01/25/23)
Linux 3.18.140-d6 #161868 Wed Jan 25 07:17:14 +06 2023 mips
scp 'firmware.bin' nstall over r51440
all good
Update method: GUI
Router/Version: Netgear R7800
File/Kernel: DD-WRT 01-25-2023-r51506
Previous/Reset: DD-WRT 01-16-2023-r51362 / No
Mode/Status: Router / Several Devices not connecting.
Issues/Errors: None of my Google camera devices would connect with this version. Downgraded and everything reconnected. Will do more troubleshooting / get more info later today.
@routemegood "None of my Google camera devices would connect with this version. Downgraded and everything reconnected. Will do more troubleshooting / get more info later today."
If you disable turboQAM on 2.4GHz, do your cameras connect?
Joined: 18 Mar 2014 Posts: 12887 Location: Netherlands
Posted: Wed Jan 25, 2023 15:07 Post subject:
nyddwrtuser330 wrote:
@routemegood "None of my Google camera devices would connect with this version. Downgraded and everything reconnected. Will do more troubleshooting / get more info later today."
If you disable turboQAM on 2.4GHz, do your cameras connect?
@routemegood "None of my Google camera devices would connect with this version. Downgraded and everything reconnected. Will do more troubleshooting / get more info later today."
If you disable turboQAM on 2.4GHz, do your cameras connect?
Also try Network mode: Mixed
Will try later this evening after work and report back. Thanks for the reply!
R7800
No reset
WDS STA on 5ghz AC/N, Vanilla FW, 5GHz VAp. 2GHz Mixed N/AC
The 5Ghz LED seems to be out for last few firmware builds, anyone else experiencing this? Functionally all traffic over the interface is fine, its just the LED.
R7800
No reset
WDS STA on 5ghz AC/N, Vanilla FW, 5GHz VAp. 2GHz Mixed N/AC
The 5Ghz LED seems to be out for last few firmware builds, anyone else experiencing this? Functionally all traffic over the interface is fine, its just the LED.
Do a Hard Reboot until it starts flashing again if it's important. Use to drive my OCD a little over the edge and I would just turn off the LEDs on my XR500.
Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r51506 std)
Kernel: Linux 3.10.108-d11 #124486 Wed Jan 25 03:47:27 +06 2023 mips
Status: working
Reset: No
Notes on configuration:
Client
Errors:
1. 5Ghz wireless light is not on (2.4Ghz light works)
Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r51506 std)
Kernel: Linux 3.10.108-d11 #124484 Wed Jan 25 03:28:24 +06 2023 mips
Status: Working
Reset: None
Notes on configuration: Used for Wifi Lab (no internet)
Errors:
None
Router: Archer-A7 v5
Firmware: tplink_archer-a7-v5.bin (v3.0-r51506 std)
Kernel: Linux 3.18.140-d6 #161852 Wed Jan 25 06:35:37 +06 2023 mips
Status: Working
Reset: None
Notes on configuration:
DNSMasq
Virtual wireless with bridging x2
multiple DHCP server