New Build - 01/19/2023 - r51440

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Thu Jan 19, 2023 5:44    Post subject: New Build - 01/19/2023 - r51440 Reply with quote
Welcome to Broadcom r51440 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build 51362 (mirror)

OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
mDNS/Avahi XFS DLNA FRR Tor mac80211 nDPI dnsmasq WG 2023 kernel BusyBox Nmap ZFS values boinc firewall inadyn
In-kernel SMB (ksmbd/tools 3.4.6/3.4.5): guest user is selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Thu Jan 19, 2023 6:31    Post subject: Reply with quote
Linksys E2500
DD-WRT v3.0-r51440 mega (01/19/23)
Linux 4.4.302-st28 #21016 Thu Jan 19 06:03:29 +06 2023 mips
'dd-wrt.v24-51440_NEWD-2_K3.x_mega.bin'
scp 'firmware.bin' install over r51362
just a WAP--- all is ok
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12835
Location: Netherlands

PostPosted: Thu Jan 19, 2023 10:19    Post subject: Reply with quote
Router Model: Netgear R6400v2, board_id: U12H332T

Firmware Version: DD-WRT v3.0-r51440M Community Build (01/19/23)
Kernel Version: Linux 4.4.302-st28 #1 SMP Thu Jan 19 10:02:44 CET 2023 armv7l

Upgraded from: DD-WRT v3.0-r51275M Community Build (01/09/23)
Reset: No not this time

Status: Up and running for 2 hours, basic setup as Gateway, static leases, 2,4GHz and 5Ghz working, USB storage NAS working. IPv6 working. SmartDNS working with DoT.
OpenVPN server working.
WireGuard server working with 8 clients (phones, Windows and two other routers for site-to-site setup) also supports IPV6 clients.
mDNS/Avahi working.

Errors: Nothing encountered yet

Thanks BS and other developers!

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12835
Location: Netherlands

PostPosted: Thu Jan 19, 2023 10:25    Post subject: Reply with quote
Router Model: Linksys EA6900 (XVortex CFE)

Firmware Version: DD-WRT v3.0-r51440M Community Build (01/19/23)
Kernel Version: Linux 4.4.302-st28 #1 SMP Thu Jan 19 10:02:44 CET 2023 armv7l

Upgraded from DD-WRT v3.0-r51186M Community Build (01/06/23) via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)

Reset: No not this time.

Configuration: Default gateway mode, 2,4GHz wireless running with unbridged VAP, 5GHz running, some static leases and some port range forwarding.
WireGuard client running with PBR.
OpenVPN client with PBR running.
IPv6 working.
NVRAM size 47K (NVRAM size should not be a problem with the Xvortex CFE)

Status: Up and stable for 2 hours

Errors: none so far

Thanks BS!!

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Thu Jan 19, 2023 12:04    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r51440) / Linux 4.4.302-st28 #8530 SMP Thu Jan 19 04:13:50 +06 2023 armv7l
Previous/Reset: DD-WRT v3.0-r51362 std (01/16/23) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + SSH (public key) + DDNS (Dynu.com) + USB Storage (guide by egc) + WireGuard server + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
jrscs
DD-WRT User


Joined: 09 Aug 2010
Posts: 413

PostPosted: Thu Jan 19, 2023 12:47    Post subject: Reply with quote
Router/Version: Asus RT-AC87U A1
Firmware: DD-WRT v3.0-r51440 std (01/19/23)
Kernel: Linux 4.4.302-st28 #8538 SMP Thu Jan 19 05:12:16 +06 2023 armv7l
Previous: DD-WRT v3.0-r51362 std (01/16/23)
Update Method: SSH / CLI using PuTTY
Mode/Status: Gateway/AP/Ok
Reset: No
Setup Using: 2.4 GHz, 2.4 GHz guest (VAP), 5.0 GHz, IPv4, DHCP, DDNS (ddns custom eNom & ddns2 Dynu), DNSMasq, Static Leases, Port Forwarding, USB jffs mounted Ext4, NTP TimeSync, Wireguard Server, and Wake-on-WAN (internet)
Issues/Errors: Ok

_________________
Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridge
Netgear R6400v2otp
matjazk
DD-WRT User


Joined: 21 Aug 2019
Posts: 120
Location: Here, There And Everywhere

PostPosted: Thu Jan 19, 2023 19:33    Post subject: Reply with quote
Router/Version: Linksys E3000
File/Kernel: DD-WRT v3.0-r51440 mega (01/19/23) / Linux 4.4.302-st28 #21016 Thu Jan 19 06:03:29 +06 2023 mips
Previous/Reset: No
Mode/Status: Repeater Bridge
Issues/Errors: Works OK so far.
PaulGo
DD-WRT User


Joined: 01 Dec 2021
Posts: 289
Location: Maryland, United States

PostPosted: Fri Jan 20, 2023 14:36    Post subject: Reply with quote
Router/Version: Netgear R7000P
Firmware Version: DDD-WRT v3.0-r51440 std (01/19/23)
Kernel Version: Linux 4.4.302-st28 #8536 SMP Thu Jan 19 04:59:04 +06 2023 armv7l
Previous/Reset: r51306 / No Reset
Mode/Status: Gateway / Working
Issues/Errors : None

Shortcut Forwarding Engine:SFE

Flow Acceleration: CFF and FA
skygunner
DD-WRT User


Joined: 28 Dec 2008
Posts: 146

PostPosted: Fri Jan 20, 2023 16:36    Post subject: Reply with quote
Router Dlink-DIR868L A1
Firmware DD-WRT v3.0-r51440 std (01/19/23)
Kernel Linux 4.4.302-st28 #8530 SMP Thu Jan 19 04:13:50 +06 2023 armv7l
Previous: r50786
Update Method: web
Mode/Status: Gateway/AP/Ok
Reset: No
Setup Using: 2.4 GHz, 5.0 GHz, IPv4, DHCP, DNSMasq, Static Leases, QoS,UPnP,CTF

Issues/Errors: Ok

_________________
[Broadcom]
DIR868L RevA -> r51506
DIR868L RevA -> r51440
Linksys EA6900-> r42819 STD
WL-500gP v2 --->

[Ralink]
DIR-600 Rev.B -> DD-WRT v3.0-r34886
oviana
DD-WRT Novice


Joined: 25 Mar 2020
Posts: 11

PostPosted: Fri Jan 20, 2023 20:40    Post subject: WNDR4500 v1 Reply with quote
Router Netgear WNDR4500 v1
Firmware dd-wrt.v24-51440_NEWD-2_K3.x_giga-WNDR4500.chk
Kernel Linux 4.4.302-st28
Previous: Netgear WNDR4500-V1.0.1.46_1.0.76.chk
Update Method: web
Mode/Status: Gateway/AP/Ok
Reset: No
Setup Using: Static IP, 2.4 GHz, 5.0 GHz, IPv4, DHCP Forwarder

- Boots fine, and was able to do factory defaults reset.
- 2.4Ghz and 5.0Ghz works.
- WPA2/PSK (AES) works.
- SSH works.


Issues/Errors:
- Gets stuck at "Checking crc..." for a long time during boot (several minutes) - seen via serial.
- 5GHz is slow (80Mbps), 2.4Ghz is at 30Mbps - despite gigabit speed at the port.
RodriC
DD-WRT Novice


Joined: 18 Jan 2018
Posts: 33

PostPosted: Sat Jan 21, 2023 3:28    Post subject: Reply with quote
Router: Dlink DIR-885L A1
Firmware: DD-WRT v3.0-r51440 std (01/19/23)
Kernel: Linux 4.4.302-st28 #8530 SMP Thu Jan 19 04:13:50 +06 2023 armv7l
Previous: r51140
Update Method: web
Mode/Status: Repeater
Reset: No
Setup Using: 2.4 GHz, 5.0 GHz, SFE, CTF

I don't know if I'm wrong, it seems that I am the only one who owns the D-Link DIR-885L here, I really wanted to know if anyone else is experiencing excessive heat from the router, reaching 82ºC and restarting a few times.
I also noticed a performance drop on 2.4 and 5GHz networks with current firmwares. I had better speeds with November month firmwares
scope2
DD-WRT User


Joined: 12 Jul 2017
Posts: 181

PostPosted: Sat Jan 21, 2023 15:21    Post subject: Reply with quote
I've just installed this firmware on my Asus AC68U, upgrading from r50176.

But when it came back up I was presented with this screen:



I hit reboot, and now I cant make connection with it..

Whats going on?

Edit: I gave it 10 minutes.. then turned it off and back on again, and it came back online again.. Been using DD-WRT for 15 years and never seen this before, nearly gave me a heart attack. Smile

(I'd still like to know why it happened, just so I know for the future)
strange
DD-WRT User


Joined: 18 Jun 2006
Posts: 229

PostPosted: Sat Jan 21, 2023 21:24    Post subject: Reply with quote
Netgear R6700 v3 – Station Bridge
Firmware Version: DD-WRT v3.0-r51440 std (01/19/23)
Kernel Version: Linux 4.4.302-st28 #8530 SMP Thu Jan 19 04:13:50 +06 2023 armv7l
Temperatures: CPU 66.4 °C / WL1 53.3 °C
Current Time: Sat, 21 Jan 2023 13:21:16
Uptime: 1 day, 19:42
Reset: No
CL install over r51288

No issues

Thank you BS and gurus.

_________________
Netgear XR500 - Gateway
R6700 v3 - Station Bridge
stev42
DD-WRT Novice


Joined: 14 Sep 2022
Posts: 5

PostPosted: Sun Jan 22, 2023 9:42    Post subject: Reply with quote
Router/Version: Netgear R7000
File/Kernel: DD-WRT v3.0-r51440 std (01/19/23) / Linux 4.4.302-st28 #8530 SMP Thu Jan 19 04:13:50 +06 2023 armv7l
Previous/Reset: DD-WRT v3.0-r50146 std (09/10/22)/ No reset
Mode/Status: Gateway, Wireless AP, Static Leases, CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info except DHCP server
Issues/Errors: Working fine, except having issues with dnsmasq dhcp static leases.

No reset this time, but having same issue as with previous upgrade (r39345M->r50146) . Static leases are not working fine. DHCP clients are not getting their ip from main dhcp server (dnsmasq).

I have two vlans on the switch : br0 (eth1,eth2,vlan1), vlan3 and two dhcp servers, one on br0 domain and one on vlan3 domain. Vlan3 dhcp server is working fine. The main dhcp server serving br0 is not answering requests.

I isolated dhcp traffic on interface br0 and interface vlan3 with tcpdump.
- on br0, there is clearly no dhcp replies
Code:
IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 70:26:05:be:7f:57, length 290
IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 04:10:6b:92:f6:ff, length 288
IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 50:8a:06:30:d8:e6, length 308
IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 70:26:05:be:7f:57, length 290
IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 04:10:6b:92:f6:ff, length 288
IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 04:10:6b:92:f6:ff, length 290
IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 04:10:6b:92:f6:ff, length 290
IP 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from 50:8a:06:30:d8:e6, length 308

- on vlan3, replies are ok
Code:
root@DD-WRT:~# tcpdump -t -i vlan3 -n udp port 67 or port 68
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on vlan3, link-type EN10MB (Ethernet), snapshot length 262144 bytes
IP 192.168.3.63.68 > 192.168.3.1.67: BOOTP/DHCP, Request from 9c:80:df:fd:c6:00, length 330
IP 192.168.3.1.67 > 192.168.3.63.68: BOOTP/DHCP, Reply, length 302

Does that mean i have to clear nvram and make hard reset?
I just wanted to avoid that if possible.

I also noticed that vlan1 and vlan3 have same mac address in the Setup/Networking tab, dont know if it's wrong or right (maybe thereis a conflict, two dhcp servers serving same domain, so one is not working fine) :
Code:
eth1 : 78:D2:94:0E:EC:EE
eth2 : 78:D2:94:0E:EC:FF
vlan1 : 78:D2:94:0E:EC:EC
vlan3 : 78:D2:94:0E:EC:EC
br0.0 : 78:D2:94:0E:EC:EE
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12835
Location: Netherlands

PostPosted: Sun Jan 22, 2023 10:13    Post subject: Reply with quote
If you came from r39345M->r50146 without a reset then a reset to defaults and put settings in manually is highly recommended.

Most of us use static leases in text form added in the DNSMasq Additional Options like:
dhcp-host=00:25:9C:4D:11:22,192.168.0.3,E2000,1440m

You current leases can be found with:
cat /tmp/dnsmasq.conf

Note that the names in the static leases may only contain letters, numbers and a hyphen no other characters (I think also an underscore is allowed)

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum