Posted: Mon Jan 16, 2023 19:41 Post subject: New Build - 01/16/2023 - r51362
Welcome to Atheros r51362 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Linksys EA8500...main gateway
DD-WRT v3.0-r51362 std (01/16/23)
Linux 4.9.337 #1488 SMP Sun Jan 15 05:04:18 +07 2023 armv7l
scp 'firmware.bin' install over r51306
all good
#
Netgear WNDR3700 V4
DD-WRT v3.0-r51362 std (01/16/23)
Linux 3.18.140-d6 #161356 Mon Jan 16 09:03:39 +06 2023 mips
scp 'firmware.bin' install over r51306
all good
Joined: 03 Nov 2015 Posts: 317 Location: Florida, USA
Posted: Tue Jan 17, 2023 2:19 Post subject:
Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r51362 std (01/16/23
Kernel: Linux 4.9.337 #1488 SMP Sun Jan 15 05:04:18 +07 2023 armv7l
Reset: NO .... GUI upgrade from r51288
Mode: 2.4 GHz only .... Firmware type .. DD-WRT
Errors: NONE
Router: Linksys ea8500 ..WDS Stations ... X (2)
Firmware: DD-WRT v3.0-r51362 std (01/16/23
Kernel: Linux 4.9.337 #1488 SMP Sun Jan 15 05:04:18 +07 2023 armv7l
Reset: NO .... GUI upgrade from r51288
Mode: 2.4 GHz only .... Firmware type .. DD-WRT
Errors: NONE
************* UPDATE: Immediately after upgrade my AP began restarting every 2-3 min. Both stations are inactive at this time but checking status, max uptime has only been 6 min. so far. Reverted back to my fail safe r50841 on the AP and all is fine again. Will try more tomorrow. _________________ ......All GOOD here... Just Handshakes and Time Stamps !......
Joined: 03 Nov 2015 Posts: 317 Location: Florida, USA
Posted: Tue Jan 17, 2023 4:28 Post subject:
Been tweeking my settings a little each day trying to troubleshoot a station that looses connection periodically. Guess I got things messed up a little.
********* UPDATE AGAIN... Like I said I been playing with settings and in reading the wiki I came across this and for some reason decided to enable STP. I can`t say all was smooth before but the upgrade caused me some issue. All is back right again and I`ll try to reload r51362 again later.
Router/Version: TP-Link TL-WR841ND v11
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #161314 Mon Jan 16 07:41:02 +06 2023 mips
Previous/Reset: r51306 / no
Mode/Status: AP wired and wireless / Up and running for 2 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Router: Linksys ea8500
Firmware: DD-WRT v3.0-r51362 std (01/16/23)
Kernel: Linux 4.9.337 #1488 SMP Sun Jan 15 05:04:18 +07 2023 armv7l
Reset: NO. GUI upgrade from r51306
Mode: Gateway w/SPI Firewall. 2.4ghz AP, 5ghz WDS AP
Errors: TCP ACK RST packets leak onto WAN with LAN source IP
Router: Netgear WNDR3700 V4
Firmware: DD-WRT v3.0-r51362 std (01/16/23)
Kernel: Linux 3.18.140-d6 #161356 Mon Jan 16 09:03:39 +06 2023 mips
Reset: NO. GUI upgrade from r51306
Mode: Router. 2.4ghz AP, 5ghz WDS Client w/VAP
Errors: 5ghz VAP to repeat WDS Client SSID fails w/Channel: Unknown if WDS AP control channel is 161 (L or LL). Works with WDS AP control channel 157 (LU-2)
Router: Dlink DIR862-A1
Firmware: DD-WRT v3.0-r51362 std (01/16/23)
Kernel: Linux 3.18.140-d6 #161350 Mon Jan 16 08:42:47 +06 2023 mips
Reset: NO. GUI upgrade from r51306
Mode: Router. 2.4ghz AP, 5ghz WDS AP
Errors: None