Posted: Thu Jan 12, 2023 13:17 Post subject: New Build - 01/12/2023 - r51288
Welcome to Atheros r51288 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: TP-Link TL-WR841ND v11
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #161046 Thu Jan 12 07:09:20 +06 2023 mips
Previous/Reset: r51275 / no
Mode/Status: AP wired and wireless / Up and running for 2 hours
Issues/Errors: Nothing significant
When updating via wi-fi. GUI install over - bad flash. I had to restore the router again and download wr841nv11_tp_recovery.
Via LAN - all good
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Joined: 03 Nov 2015 Posts: 316 Location: Florida, USA
Posted: Fri Jan 13, 2023 16:08 Post subject:
Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r51288 std (01/12/23)
Kernel: Linux 4.9.337 #1484 SMP Wed Jan 11 03:07:09 +07 2023 armv7l
Reset: NO ...GUI upgrade from r51275
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: NONE
Router: Linksys ea8500 ..WDS Stations ... X (2)
Firmware: DD-WRT v3.0-r51288 std (01/12/23)
Kernel: Linux 4.9.337 #1484 SMP Wed Jan 11 03:07:09 +07 2023 armv7l
Reset: NO ...GUI upgrade from r51275
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: NONE
Thanks Guys !! ...Uptime now 12 hrs. Just judging by the very low output from the logs this seems to be a very good build. _________________ ......All GOOD here... Just Handshakes and Time Stamps !......
Last edited by ramblin on Sat Jan 14, 2023 5:48; edited 1 time in total
Posted: Fri Jan 13, 2023 18:31 Post subject: Upgrades
Router/Version: D-link DIR-862L A1
File/Kernel: Webflash
Previous/Reset: Firmware: DD-WRT v3.0-r51140 std (12/31/22), Reset No
Mode/Status: WDS Station
Issues/Errors: None, so far.
Router/Version: Netgear R7800
File/Kernel: Webupgrade
Previous/Reset:
Firmware: DD-WRT v3.0-r51184 std (01/06/23), Reset No, one WDS Station
Firmware: DD-WRT v3.0-r51140 std (12/31/22), Reset No, one WDS Station, one WDS AP
Mode/Status: WDS Station x2, WDS AP / DHCP / NAT x 1
Issues/Errors: None, so far.
Router/Version: TP-Link Archer C7 v2
File/Kernel: tplink archer c7 v2.bin
Previous/Reset: Firmware: DD-WRT v3.0-r51140 std (12/31/22), Reset No
Mode/Status: WDS Station
Issues/Errors: None, so far.
Previous uptime on all of the above was over 13 days.
This is for the people that complain that I don't post for every build I upgrade. This is all that is currently in use. In the summer I have most of the ones in my signature in use. That is lot to post every couple of days. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
All good, did notice my external USB is taking slightly longer to mount in this build, which is causing my startup script restarting dnsmasq to reference a host file on it, to not work. But i resolved that by pushing the sleep to 30 seconds from 2. Otherwise all good
R7800 - WDS STA 5GHZ, VAP 5GHZ
Minor cosmetic issue - the 5ghz led does not light. However the actual radio functioning seems perfect, this may have started with the 01/09 build though.
Router: Linksys ea8500
Firmware: DD-WRT v3.0-r51288 std (01/12/23)
Kernel: Linux 4.9.337 #1484 SMP Wed Jan 11 03:07:09 +07 2023 armv7l
Reset: NO. GUI upgrade from r51275
Mode: Gateway w/SPI Firewall. 2.4ghz AP, 5ghz WDS AP
Errors: TCP ACK RST packets leak onto WAN with LAN source IP
Router: Netgear WNDR3700 V4
Firmware: DD-WRT v3.0-r51288 std (01/12/23)
Kernel: Linux 3.18.140-d6 #161088 Thu Jan 12 08:32:09 +06 2023 mips
Reset: NO. GUI upgrade from r51275
Mode: Router. 2.4ghz AP, 5ghz WDS Client w/VAP
Errors: 5ghz VAP to repeat WDS Client SSID fails w/Channel: Unknown if WDS AP control channel is 161 (L or LL). Works with WDS AP control channel 157 (LU-2)
Router: Dlink DIR862-A1
Firmware: DD-WRT v3.0-r51288 std (01/12/23)
Kernel: Linux 3.18.140-d6 #161082 Thu Jan 12 08:11:14 +06 2023 mips
Reset: NO. GUI upgrade from r51275
Mode: Router. 2.4ghz AP, 5ghz WDS AP
Errors: None
wlan1 WDS Sta w/wlan1.1 VAP, wlan0 AP,r45727 override
All good
Buffalo WZR-HP-AG300H WDS STA
Tried to upgrade from 49139
Upgrade was successful but WDS was not functional.
50906 turns out to be last working build for WDS.
Good enough
please recheck. wds ap -> wds sta still works for me on this device. consider that there might be config changes since you upgraded from a much older version. _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
please recheck. wds ap -> wds sta still works for me on this device. consider that there might be config changes since you upgraded from a much older version.
Well blow me down 🥳
Screwed with it most of the day yesterday, many versions. Resets-Reconfigs
Went through now and set up exactly like R7500v2 (where possible) made a couple minor changes shouldn't have affected functionality.
