Posted: Mon Jan 09, 2023 9:36 Post subject: New Build - 01/09/2023 - r51275
Welcome to Broadcom r51275 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Posted: Mon Jan 09, 2023 10:32 Post subject: ASUS RT-AC68U & 2 x Linksys E2000
Asus RT-AC68U
Firmware: DD-WRT v3.0-r51275 std (01/09/23) - (previous R51140)
Kernel: Linux 4.4.302-st28 #8480 SMP Mon Jan 9 05:49:43 +06 2023 armv7l
5Ghz (Mixed) with 80Mhz channel width (upper/lower): Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz & 5Ghz: Ok
Reset: No
Status: Ok
Uptime: 11 min
CPU Temperature: CPU 69.7 °C / WL0 47.0 °C / WL1 45.0 °C
2 x E2000
Firmware: DD-WRT v3.0-r51275 mega (01/09/23) - (previous r51140)
Kernel: Linux 4.4.302-st28 #20836 Mon Jan 9 07:11:15 +06 2023 mips
2.4Ghz (NG-mixed) with 40Mhz channel width: Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz: Ok
Reset: No
Status: Ok
Uptime: 18 minutes (the other a few minutes less)
CPU Temperature: WL0 47.8 °C/WL0 53.8 °C
All devices working as AP's each with individual 1Gb wired connections to main firewalls
No issues so far, will update if experiencing any.
Joined: 18 Mar 2014 Posts: 12837 Location: Netherlands
Posted: Mon Jan 09, 2023 11:34 Post subject:
Router Model: Netgear R6400v2, board_id: U12H332T
Firmware Version: DD-WRT v3.0-r51275M Community Build (01/09/23)
Kernel Version: Linux 4.4.302-st28 #1 SMP Mon Jan 9 08:38:43 CET 2023 armv7l
Upgraded from: DD-WRT v3.0-r51140M Community Build (01/01/23)
Reset: No not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, 2,4GHz and 5Ghz working, USB storage NAS working. IPv6 working. SmartDNS working with DoT.
OpenVPN server working.
WireGuard server working with 8 clients (phones, Windows and two other routers for site-to-site setup).
mDNS/Avahi working.
Joined: 16 Nov 2015 Posts: 6410 Location: UK, London, just across the river..
Posted: Mon Jan 09, 2023 17:50 Post subject:
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r51275 std (01/09/23)
Kernel Version Linux 4.4.302-st28 #8480 SMP Mon Jan 9 05:49:43 +06 2023 armv7l
update: CLI r51184 > r51275
reset: NO
mode: Gateway
status: Operational 3h+
errors: since 51184 ive found some strange output of
tcpdump -nnS -i br0 !'port 22'
i haven't seen it before, as i haven't sniffed at br0...ill open a new thread to post some data _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Wed Jan 11, 2023 6:05; edited 1 time in total
Joined: 24 Feb 2013 Posts: 1634 Location: Belgrade
Posted: Tue Jan 10, 2023 21:29 Post subject:
Router/Version: Netgear R8000 with brcmfmac
File/Kernel: Linux 4.4.302-st28 #8489 SMP Mon Jan 9 06:53:18 +06 2023 armv7l
Previous/Reset: No
Mode/Status: Working great, up 1 day, 17:30, tri-band, WG server, CTF, mactelnet, ssh with forwardings,
Issues/Errors: None so far... Thx BS and Egc
Posted: Wed Jan 11, 2023 16:39 Post subject: Upgrade
Router/Version: Linksys EA6400
File: linksys-ea6400-webflash.bin
Firmware: DD-WRT v3.0-r51275 std (01/09/23) (prev. DD-WRT v3.0-r51184 std (01/06/23))
Kernel: Linux 4.9.337 #3593 SMP Mon Jan 9 05:36:41 +07 2023 armv7l
Mode: Gateway, SFE Disabled
Reset: No
Status: OK. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
Router/Version: Netgear R8500 with DD-WRT v3.0-r51275 std (01/09/23)
File/Kernel: Linux 4.4.302-st28 #8486 SMP Mon Jan 9 06:32:15 +06 2023 armv7l
Previous/Reset: r41328 (10-15-2019) / No (because of R8500 bug of losing Wi-fi)
Mode/Status: Wi-Fi Ok, SSH Ok, OVPN Ok, USB & NAS Ok, Port Forwarding Ok.
Issues/Errors: None
Thxs
Joined: 26 Mar 2013 Posts: 1855 Location: Hung Hom, Hong Kong
Posted: Thu Jan 12, 2023 8:11 Post subject: DD-WRT BS build 51275 and Asus RT-N18U
Router/Version:Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r51275 std (01/09/23)
Kernel: Linux 4.4.302-st28 #8484 Mon Jan 9 06:17:10 +06 2023 armv7l
Previous: DD-WRT v3.0-r50963 std (11/28/22)
Mode: WAN @ DHCP, Wireless @ AP (Mixed)
Status: Working {
Not 24/7; Not using CTF, FA, STP, IPv6, VPN, VAP;
USB storage(/jffs, /opt); NAS (ksmbd, lighttpd);
WAN DNS disabled; DDNS (no-ip.com) OK;
DNSmasq not serving DNS; Recursive DNS Unbound (/jffs/etc/unbound.conf);
Entware core (CPU: armv71) installed without problem
}
Reset: No RESET during firmware upgrade
File:https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2023/01-09-2023-r51275/n18u/
Summary
Everything working normally. Port-forwarding still failed with CTF enabled.
Code:
Speedtest by Ookla
Server: HKIX - Hong Kong (id: 34555)
ISP: Hong Kong Broadband Network
Idle Latency: 1.66 ms (jitter: 0.04ms, low: 1.64ms, high: 1.72ms)
Download: 93.86 Mbps (data used: 73.2 MB)
10.51 ms (jitter: 22.09ms, low: 7.41ms, high: 229.35ms)
Upload: 93.71 Mbps (data used: 42.3 MB)
9.69 ms (jitter: 1.85ms, low: 5.36ms, high: 16.03ms)
Packet Loss: 0.0%
Result URL: https://www.speedtest.net/result/c/7ce4908e-8e35-44bf-bbed-1f16407e19c5
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Thu Jan 12, 2023 11:17 Post subject:
I have the Tp-Link TL-WDR3600 v 1.5. After more than 1 day uptime device have ~40 - 50 secs stops of serving the internet connection. All functions look good, but I can't use internet and after ~40 secs connections back without my actions. When I try to fix problem I decide to restart router via button on case and physically restart ISP modem by button on case. After restart devices services working better. Today I see large system load on Tp-Link and double tasks after look to ps in Putty. "DD-WRT Guru" you can to see this posts. I'm attach photo & ps command efect. I have two task with ssh, I don't no why and why it's a big load (sometimes 30% and higher) when ~10 connections is active.